![]() |
|
![]() |
#1 |
Registered User
Join Date: Nov 2005
Location: wisconsin
Posts: 142
|
250 vs 292 inline six
I have a 250 and a 292 inline six, One of these I will be putting in my 69 gmc. Does any body know the horsepower and torque diffrences between the two? Any advantages to using either engine? The both run perfect and have the same mileage?
Thanks, Mark |
![]() |
![]() |
![]() |
#2 |
Active Member
![]() Join Date: Dec 2005
Location: Bethlehem, PA
Posts: 346
|
Re: 250 vs 292 inline six
292 is a little more strongly constructed and has a little more "grunt" to it. If you have all of the accessories for both you should be okay. 292 takes a few different parts than the rest of the family (194-230-250). Either should work well for you.
__________________
The older I get, the faster I was!! |
![]() |
![]() |
![]() |
#3 |
Weekend Warrior
Join Date: Oct 2004
Location: CT
Posts: 1,787
|
Re: 250 vs 292 inline six
It probably depends on the year of the motor:
But my '71 Owner's manual says: 250cid = 8.5:1, 145hp@4200(Gross), 110hp@4000(Net), 230tq@1600(Gross), 185tq@1600(Net) 292cid = 8.0:1, 165hp@4000(Gross), 130hp@4400(Net), 270tq@1600(Gross), 225tq@2400(Net)
__________________
-'07 GMC Sierra K2500HD -'66 C10 Suburban -'68/'71 K20 Service Bed Project -'69 Chevy C30 Mason Dump -'33Ford P/U 396ChevyPowered ![]() ![]() ![]() |
![]() |
![]() |
![]() |
#4 |
Registered User
Join Date: Apr 2003
Location: Central PA....In the Berg of Nisbet
Posts: 790
|
Re: 250 vs 292 inline six
Since you got both I'd use the 292.............I went with a 250 mainly because we have a ton of them laying around here, and it was a drop in and go deal.
__________________
'72 K-20 EFI'ed 250 Inline/4spd stake body, Farm Truck '71 C-20 Cummins Diesel Powered, In storage thanks to $5.00 diesel! '69 3500 GMC 305V-6/4spd, Still under reconstruction.......... Inlines Rule! 6 soldiers standing is better than 8 laying down!!!!!!!! |
![]() |
![]() |
![]() |
#5 |
Registered User
Join Date: Sep 2003
Location: Franconia,N.H.
Posts: 1,029
|
Re: 250 vs 292 inline six
i would also use the 292 because it's got a little more power and torque and because it's built better but as said before you will need a few different parts for it
__________________
(Only) Member of the CPNE Fan Club ![]() ![]() 67 C-10 350 with 3-speed tranny and 308 gears swb step ![]() 82 Z28 Camaro 355 small block over 350 hp and a borg warner super t-10 (blown engine) 72 Chevy K20 Suburban (future project) 70 Chevy K20 now 68 GMC K2500 2003 Chevy 2500hd ccsb 4X4 (daily driver) |
![]() |
![]() |
![]() |
#6 |
I am a Referee of life.
Join Date: Jun 2000
Location: Greensboro N.C.
Posts: 13,993
|
Re: 250 vs 292 inline six
When in doubt,cubic inches win out!!
__________________
The 47-present Chevrolet and GMC Truck Message Board Network,it's owners,moderators,members,and associates of any type should not be held responsible for my opinion. You can't fix stupid,not even with duct tape. "My appearance is due to the fact that "GOD" does punish you for having too much fun!" Barrett-Jackson has perfected alchemy,they make rust into gold! "You can lead a horse to water but you can't saddle a duck" "Cleverly disguised as a 'Responsible Adult' "Sometimes your Knight in shining armor is just a retard in tinfoil" |
![]() |
![]() |
![]() |
#7 |
Registered User
Join Date: Sep 2005
Location: 9000' Mountain Man
Posts: 326
|
Re: 250 vs 292 inline six
The old saying is "There is no substitute for cubic inches" - Just ask Longhorn Man!
|
![]() |
![]() |
![]() |
#8 |
A little east of nowhere
Join Date: Feb 2006
Location: LaBroquerie,Manitoba Canada
Posts: 168
|
Re: 250 vs 292 inline six
Check your frame stands for the motor mounts. The right side on the 292 is ahead of all the others and is not a straight drop in.( Later 70's with HEI for sure.)
__________________
68 C10 250 4spd 69 C20 327 4spd 69 910 250 3spd 80 K10 350 4spd 76 C60 366 5spd school bus "THERE'S NOTHING YOU CAN BREAK THAT SOMEONE CAN'T BE PAID TO REPAIR" |
![]() |
![]() |
![]() |
#9 |
Senior Member
![]() Join Date: Feb 2002
Location: Tucson, AZ USA
Posts: 7,280
|
Re: 250 vs 292 inline six
I vote for the 292.
__________________
Every 25 years I like to rebuild that 292, whether it needs it or not. |
![]() |
![]() |
![]() |
Bookmarks |
|
|