16.5x9.75 with 12-16.5lt pics? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

True Grit · 04-06-2006, 08:55 PM

i've checked the wheel tire combo thread and couldn't find one. anyone have any pics of a 16.5x9.75 wheel with a 12-16.5lt tire? reason is , i recently purchased some american eagle 058 style wheels that were to cheap to pass up and i love the look of the old style 12-16.5lt hwy tire. any pics?

**kwmech** · 04-06-2006, 09:17 PM

How's this

oops, lets try again

I can't get them attached without being too small

Robert1970C20rstbukt · 04-06-2006, 10:18 PM

I have an old Cooper Super Traction 12-16.5 mud tire on one of those wheels, it's too bad they don't make 'em anymore. Here's a pic of a 33-12.5-16.5 Mudking on a stock 16.5x9.75 GM wheel that's on my truck. I think it's the same size as the 12-16.5 tire that I have for a spare. For the record that's an old pic and the wheel is now painted.

**special-K** · 04-06-2006, 10:19 PM

Here ya go:

True Grit · 04-06-2006, 10:30 PM

special-k,do you think i'll have any clearance probs with that combo on my stock suspension 2wd?

**special-K** · 04-06-2006, 10:43 PM

Yes,mine rub a bit w/stock 4wd suspension.May be good with 8.25" rims.The blue & white truck has 285/75x16s on 8x16s.They`re knobby ol`SuperSwampers and the truck is stock.They rub sometimes,too.

Robert1970C20rstbukt · 04-06-2006, 10:50 PM

I had to put spacers in the rear coils on mine to lift the rear up so they wouldn't rub when I haul my welding stuff, but when I didn't haul anything they fit OK.

True Grit · 04-06-2006, 10:52 PM

crap. well,any other sug's?

stllookn · 04-06-2006, 11:47 PM

I used to run 33 x 12.5 x 16.5's on 9.75 in wide rims without a problem on a '72 2wd 3/4 t. OK...it would rub in front every now and then at full lock on an aggressive turn.

I now have 31 x 10.5 x 16.5's on the front and 33 x 12.5 x 16.5's on the rear of my '68 on 8.25-in. rims. I am going to 33 x 12.5 x 16.5's on 9.75 wide rims all around. It should work fine. I still have to check the front for clearance however.

The Ansen slots are 9.75 rims with 33 x 12.5's just what you are asking about and I intend to mount them up and try them as soon as I get some suitable lug nuts!

**special-K** · 04-07-2006, 08:46 AM

I ran 9.75x16.5 Slots w/12.50s rear and 8.25x16.5 slots w/9.50s front on my totally original`71 CustomCamper/20(leaf) for 15 years,never rubbed.I hauled a 10' camper on it,dropped about an inch,no rubbing.Tires were Dunlop Radial Rover A/Ps.If I could e-mail them to someone,I have pictures(prints).Lookes real good,just right.I could still get my hands on these if you`re interested.I`d dismount rhe rubber,same tires I bought in`88,

True Grit · 04-07-2006, 03:18 PM

man, i'd really like to run these 9.75's that i've got. i really thought the 33-12.50-16.5's would rub badly, esp on the front.

**special-K** · 04-08-2006, 11:03 AM

You could bring the front end up a bit.I`ve seen guys run them.I do`nt go for alot of lift on my 4wds.I`m used to being careful and keeping rubbing to a minimum.The ones I`ve built for serious off road,I`ve cut fenders.The body`s going to get messed up anyway.I don`t need 36" of travel.

True Grit · 04-08-2006, 01:04 PM

the tires i want to run are cooper super road service 12-16.5, specs

n a 9.75 wheel, section width is 12.30,diam is 32.20, tread width is 9.50 . now surely the rears won't rub , but i'm wonderin' about the front, stock 2wd 3/4 ton with bb springs? any more input?

72armyswbtruck · 04-08-2006, 01:25 PM

Stillookin, are those 8 lug aluminium slugs? Are you using them?

stllookn · 04-08-2006, 02:23 PM

72army...they are! Aren't they pretty? I intend to find two more of the 9.75 x 16.5's and run them on my Longhorn. The 8.25's my go on my Longhorn trailer...LOL! I missed two 9.75" wheels last weekend for $40!!!!!!!!!! I am still grieving!

I intend to have 4 sets of wheels for my two Longhorns as follows:
Stock 16.5 split rims (have all four)
9.75 x 16.5 steel wheels with hubcap clips (have two, need two)
9.75 x 16.5 Ansen slots (have two, need two)
8.25 x 16.5 steel wheels (have all four)

Can't have too many sets of wheels!

JAKES 68GMC · 04-08-2006, 09:13 PM

Quote:

Originally Posted by stllookn

72army...they are! Aren't they pretty? I intend to find two more of the 9.75 x 16.5's and run them on my Longhorn. The 8.25's my go on my Longhorn trailer...LOL! I missed two 9.75" wheels last weekend for $40!!!!!!!!!! I am still grieving!

I intend to have 4 sets of wheels for my two Longhorns as follows:
Stock 16.5 split rims (have all four)
9.75 x 16.5 steel wheels with hubcap clips (have two, need two)
9.75 x 16.5 Ansen slots (have two, need two)
8.25 x 16.5 steel wheels (have all four)

Can't have too many sets of wheels!

You don't need all those aluminum slot wheels, much less to go on a trailer. Share the wealth with other people, a.k.a ME!!!

stllookn · 04-08-2006, 09:19 PM

I had to refresh my memory on this one so I got the lug nuts today and mounted the 33 x 12.5 x 16.5 on 9.75 rim on the front. Here it is and it clears with no problems lock to lock it has an inch or two clearance but then I did not try to jump anything. This is a 2wd 3/4 t. '68 Longhorn.

**Canadian694x4** · 04-09-2006, 12:07 AM

Stllookn, Those Slots look Spectacular on that 50th of yours!!

stllookn · 04-09-2006, 12:15 AM

Thanks...it really gives it the "period" look. I can't wait to get some new sheet metal and paint on the truck. JAKES...I will probably have a set of 8.25's for sale by next summer.

Pics were loading slow so I left one off...maybe I will have to leave those wheels on now...LOL!

Robert1970C20rstbukt · 04-09-2006, 12:48 AM

stllookin, that looks awesome!

I'll have to see if the 33's will fit on the front of mine, are you using stock springs or BB springs? I have a set from a 1 ton truck I'm going to install if the stock ones dont' work.

stllookn · 04-09-2006, 06:17 AM

Mine are stock small block springs and they seem to work fine. I was considering raising the front of my truck slightly to achieve a level ride when I am finished with it and big block springs might be the answer...but I guess I could always lower the rear slightly. Some guys like the slight rake but I really prefer the level look. Those tires do fill the wheel well nicely!

True Grit · 04-10-2006, 04:28 PM

stllookn, that looks great! i think you've answered my ? on what i'll use! man that looks tough!

Robert1970C20rstbukt · 04-10-2006, 07:58 PM

The 33's bearly fit on my truck, guess the springs are shot. I'll have to get the 1 ton springs installed later on and see how much of a difference those make.

stllookn · 04-10-2006, 09:59 PM

I have 4 good 33 x 12.5 x 16.5 tires (mismatched) but Discount Tire (Texas warehouse) has them for $125/each. That is a pretty sweet deal...I might have to spring for those now that I think I have located two more wheels for the Longhorn!

**special-K** · 04-10-2006, 10:53 PM

It`s just hard to believe those don`t rub on a 2wd when they rub on my 4wd.

04-06-2006, 08:55 PM	#1
True Grit Why Buy New? Join Date: Sep 2004 Location: Locust Grove, Oklahoma Posts: 60	16.5x9.75 with 12-16.5lt pics? i've checked the wheel tire combo thread and couldn't find one. anyone have any pics of a 16.5x9.75 wheel with a 12-16.5lt tire? reason is , i recently purchased some american eagle 058 style wheels that were to cheap to pass up and i love the look of the old style 12-16.5lt hwy tire. any pics? __________________ '71 GMC 1/2 Ton LWB '71 Chevy 3/4 ton Longhorn

04-06-2006, 09:17 PM	#2
kwmech Senior Member Join Date: Mar 2003 Location: Colfax-California Posts: 8,599	Re: 16.5x9.75 with 12-16.5lt pics? How's this oops, lets try again I can't get them attached without being too small Last edited by kwmech; 04-06-2006 at 09:33 PM.

04-06-2006, 10:18 PM	#3
Robert1970C20rstbukt Registered User Join Date: Jun 2004 Location: Beeville, Texas Posts: 1,943	Re: 16.5x9.75 with 12-16.5lt pics? I have an old Cooper Super Traction 12-16.5 mud tire on one of those wheels, it's too bad they don't make 'em anymore. Here's a pic of a 33-12.5-16.5 Mudking on a stock 16.5x9.75 GM wheel that's on my truck. I think it's the same size as the 12-16.5 tire that I have for a spare. For the record that's an old pic and the wheel is now painted. Attached Images __________________ RJD 1984 Chevrolet C30 welding truck 454/SM465 1977 GMC C15 pickup 350/TH350 1970 Chevrolet C20 pickup 350/TH400 1970 Chevrolet K20 Suburban 454/TH350 1969 GMC 8500 478M V6/5 spd winch truck Last edited by Robert1970C20rstbukt; 04-06-2006 at 10:19 PM.

04-06-2006, 10:19 PM	#4
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,852	Re: 16.5x9.75 with 12-16.5lt pics? Here ya go: __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

04-06-2006, 10:30 PM	#5
True Grit Why Buy New? Join Date: Sep 2004 Location: Locust Grove, Oklahoma Posts: 60	Re: 16.5x9.75 with 12-16.5lt pics? special-k,do you think i'll have any clearance probs with that combo on my stock suspension 2wd? __________________ '71 GMC 1/2 Ton LWB '71 Chevy 3/4 ton Longhorn

04-06-2006, 10:43 PM	#6
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,852	Re: 16.5x9.75 with 12-16.5lt pics? Yes,mine rub a bit w/stock 4wd suspension.May be good with 8.25" rims.The blue & white truck has 285/75x16s on 8x16s.They`re knobby ol`SuperSwampers and the truck is stock.They rub sometimes,too. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

04-06-2006, 10:50 PM	#7
Robert1970C20rstbukt Registered User Join Date: Jun 2004 Location: Beeville, Texas Posts: 1,943	Re: 16.5x9.75 with 12-16.5lt pics? I had to put spacers in the rear coils on mine to lift the rear up so they wouldn't rub when I haul my welding stuff, but when I didn't haul anything they fit OK. __________________ RJD 1984 Chevrolet C30 welding truck 454/SM465 1977 GMC C15 pickup 350/TH350 1970 Chevrolet C20 pickup 350/TH400 1970 Chevrolet K20 Suburban 454/TH350 1969 GMC 8500 478M V6/5 spd winch truck

04-06-2006, 10:52 PM	#8
True Grit Why Buy New? Join Date: Sep 2004 Location: Locust Grove, Oklahoma Posts: 60	Re: 16.5x9.75 with 12-16.5lt pics? crap. well,any other sug's? __________________ '71 GMC 1/2 Ton LWB '71 Chevy 3/4 ton Longhorn

04-06-2006, 11:47 PM	#9
stllookn Saving 1 truck at a time! Join Date: Aug 2001 Location: Kent, WA Posts: 6,465	Re: 16.5x9.75 with 12-16.5lt pics? I used to run 33 x 12.5 x 16.5's on 9.75 in wide rims without a problem on a '72 2wd 3/4 t. OK...it would rub in front every now and then at full lock on an aggressive turn. I now have 31 x 10.5 x 16.5's on the front and 33 x 12.5 x 16.5's on the rear of my '68 on 8.25-in. rims. I am going to 33 x 12.5 x 16.5's on 9.75 wide rims all around. It should work fine. I still have to check the front for clearance however. The Ansen slots are 9.75 rims with 33 x 12.5's just what you are asking about and I intend to mount them up and try them as soon as I get some suitable lug nuts! Attached Images __________________ '68 C20 Longhorn 50th Anniversary 400/TH400 '68 C20 Longhorn 50th Anniversary 468/TH400w/buckets '72 C20 Halfhorn (Longhorn w/o cab and front clip) '69 Flxible Cruiser (look up ugly in the dictionary)

04-07-2006, 08:46 AM	#10
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,852	Re: 16.5x9.75 with 12-16.5lt pics? I ran 9.75x16.5 Slots w/12.50s rear and 8.25x16.5 slots w/9.50s front on my totally original`71 CustomCamper/20(leaf) for 15 years,never rubbed.I hauled a 10' camper on it,dropped about an inch,no rubbing.Tires were Dunlop Radial Rover A/Ps.If I could e-mail them to someone,I have pictures(prints).Lookes real good,just right.I could still get my hands on these if you`re interested.I`d dismount rhe rubber,same tires I bought in`88, __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

04-07-2006, 03:18 PM	#11
True Grit Why Buy New? Join Date: Sep 2004 Location: Locust Grove, Oklahoma Posts: 60	Re: 16.5x9.75 with 12-16.5lt pics? man, i'd really like to run these 9.75's that i've got. i really thought the 33-12.50-16.5's would rub badly, esp on the front. __________________ '71 GMC 1/2 Ton LWB '71 Chevy 3/4 ton Longhorn

04-08-2006, 11:03 AM	#12
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,852	Re: 16.5x9.75 with 12-16.5lt pics? You could bring the front end up a bit.I`ve seen guys run them.I do`nt go for alot of lift on my 4wds.I`m used to being careful and keeping rubbing to a minimum.The ones I`ve built for serious off road,I`ve cut fenders.The body`s going to get messed up anyway.I don`t need 36" of travel. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

04-08-2006, 01:04 PM	#13
True Grit Why Buy New? Join Date: Sep 2004 Location: Locust Grove, Oklahoma Posts: 60	Re: 16.5x9.75 with 12-16.5lt pics? the tires i want to run are cooper super road service 12-16.5, specsn a 9.75 wheel, section width is 12.30,diam is 32.20, tread width is 9.50 . now surely the rears won't rub , but i'm wonderin' about the front, stock 2wd 3/4 ton with bb springs? any more input? __________________ '71 GMC 1/2 Ton LWB '71 Chevy 3/4 ton Longhorn

04-08-2006, 01:25 PM	#14
72armyswbtruck Registered User Join Date: Feb 2004 Location: Idaho Posts: 4,034	Re: 16.5x9.75 with 12-16.5lt pics? Stillookin, are those 8 lug aluminium slugs? Are you using them? __________________ "Remember, They can Kill You, but they can't eat You, That's against the law!!!!!!!!!"

04-08-2006, 02:23 PM	#15
stllookn Saving 1 truck at a time! Join Date: Aug 2001 Location: Kent, WA Posts: 6,465	Re: 16.5x9.75 with 12-16.5lt pics? 72army...they are! Aren't they pretty? I intend to find two more of the 9.75 x 16.5's and run them on my Longhorn. The 8.25's my go on my Longhorn trailer...LOL! I missed two 9.75" wheels last weekend for $40!!!!!!!!!! I am still grieving! I intend to have 4 sets of wheels for my two Longhorns as follows: Stock 16.5 split rims (have all four) 9.75 x 16.5 steel wheels with hubcap clips (have two, need two) 9.75 x 16.5 Ansen slots (have two, need two) 8.25 x 16.5 steel wheels (have all four) Can't have too many sets of wheels! __________________ '68 C20 Longhorn 50th Anniversary 400/TH400 '68 C20 Longhorn 50th Anniversary 468/TH400w/buckets '72 C20 Halfhorn (Longhorn w/o cab and front clip) '69 Flxible Cruiser (look up ugly in the dictionary)



Register or Log In To remove these advertisements.

04-08-2006, 09:19 PM	#17
stllookn Saving 1 truck at a time! Join Date: Aug 2001 Location: Kent, WA Posts: 6,465	Re: 16.5x9.75 with 12-16.5lt pics? I had to refresh my memory on this one so I got the lug nuts today and mounted the 33 x 12.5 x 16.5 on 9.75 rim on the front. Here it is and it clears with no problems lock to lock it has an inch or two clearance but then I did not try to jump anything. This is a 2wd 3/4 t. '68 Longhorn. Attached Images __________________ '68 C20 Longhorn 50th Anniversary 400/TH400 '68 C20 Longhorn 50th Anniversary 468/TH400w/buckets '72 C20 Halfhorn (Longhorn w/o cab and front clip) '69 Flxible Cruiser (look up ugly in the dictionary) Last edited by stllookn; 04-08-2006 at 09:22 PM.

04-09-2006, 12:07 AM	#18
Canadian694x4 Born To Lose Club Join Date: Feb 2003 Location: Calgary, Alberta/Oxenden, Ontario, Great White North Posts: 13,308	Re: 16.5x9.75 with 12-16.5lt pics? Stllookn, Those Slots look Spectacular on that 50th of yours!! __________________ Brian Smith - "Born To Lose" 1969 Chevrolet K10 LWB Fleetside - Proud Owner For 22 Yrs - 1 of 208 Built & Sold In Canada!- 283 V8/350TH/NP208, 2" All Spring Lift, 32" Good Year MT/R's. 1972 GMC K2500 Custom LWB Fleetside - Proud Owner For 3 Yrs - 1 of 571 Built & Sold In Canada! - 350 V8/SM465/NP205, 4” Rough Country Lift, 33” Interco TSL Thornbirds 2007.5 GMC Sierra SLE 2500HD 4x4 - Proud Owner For 17 Yrs- 6.6L V8 Duramax Diesel/Allison 1000, 2" Lift, 33" Mickey Thompson MTZ's. 2008 Yamaha Raptor 700r - Proud Owner For 15 Yrs - ITP Mud Lites. 2015 John Deere 1025R - Proud Owner For 8 Yrs - 24HP Diesel/H120/54D/260B/SB1154.

04-09-2006, 12:15 AM	#19
stllookn Saving 1 truck at a time! Join Date: Aug 2001 Location: Kent, WA Posts: 6,465	Re: 16.5x9.75 with 12-16.5lt pics? Thanks...it really gives it the "period" look. I can't wait to get some new sheet metal and paint on the truck. JAKES...I will probably have a set of 8.25's for sale by next summer. Pics were loading slow so I left one off...maybe I will have to leave those wheels on now...LOL! Attached Images __________________ '68 C20 Longhorn 50th Anniversary 400/TH400 '68 C20 Longhorn 50th Anniversary 468/TH400w/buckets '72 C20 Halfhorn (Longhorn w/o cab and front clip) '69 Flxible Cruiser (look up ugly in the dictionary)

04-09-2006, 12:48 AM	#20
Robert1970C20rstbukt Registered User Join Date: Jun 2004 Location: Beeville, Texas Posts: 1,943	Re: 16.5x9.75 with 12-16.5lt pics? stllookin, that looks awesome! I'll have to see if the 33's will fit on the front of mine, are you using stock springs or BB springs? I have a set from a 1 ton truck I'm going to install if the stock ones dont' work. __________________ RJD 1984 Chevrolet C30 welding truck 454/SM465 1977 GMC C15 pickup 350/TH350 1970 Chevrolet C20 pickup 350/TH400 1970 Chevrolet K20 Suburban 454/TH350 1969 GMC 8500 478M V6/5 spd winch truck

04-09-2006, 06:17 AM	#21
stllookn Saving 1 truck at a time! Join Date: Aug 2001 Location: Kent, WA Posts: 6,465	Re: 16.5x9.75 with 12-16.5lt pics? Mine are stock small block springs and they seem to work fine. I was considering raising the front of my truck slightly to achieve a level ride when I am finished with it and big block springs might be the answer...but I guess I could always lower the rear slightly. Some guys like the slight rake but I really prefer the level look. Those tires do fill the wheel well nicely! __________________ '68 C20 Longhorn 50th Anniversary 400/TH400 '68 C20 Longhorn 50th Anniversary 468/TH400w/buckets '72 C20 Halfhorn (Longhorn w/o cab and front clip) '69 Flxible Cruiser (look up ugly in the dictionary) Last edited by stllookn; 04-09-2006 at 12:36 PM.

04-10-2006, 04:28 PM	#22
True Grit Why Buy New? Join Date: Sep 2004 Location: Locust Grove, Oklahoma Posts: 60	Re: 16.5x9.75 with 12-16.5lt pics? stllookn, that looks great! i think you've answered my ? on what i'll use! man that looks tough! __________________ '71 GMC 1/2 Ton LWB '71 Chevy 3/4 ton Longhorn

04-10-2006, 07:58 PM	#23
Robert1970C20rstbukt Registered User Join Date: Jun 2004 Location: Beeville, Texas Posts: 1,943	Re: 16.5x9.75 with 12-16.5lt pics? The 33's bearly fit on my truck, guess the springs are shot. I'll have to get the 1 ton springs installed later on and see how much of a difference those make. __________________ RJD 1984 Chevrolet C30 welding truck 454/SM465 1977 GMC C15 pickup 350/TH350 1970 Chevrolet C20 pickup 350/TH400 1970 Chevrolet K20 Suburban 454/TH350 1969 GMC 8500 478M V6/5 spd winch truck

04-10-2006, 09:59 PM	#24
stllookn Saving 1 truck at a time! Join Date: Aug 2001 Location: Kent, WA Posts: 6,465	Re: 16.5x9.75 with 12-16.5lt pics? I have 4 good 33 x 12.5 x 16.5 tires (mismatched) but Discount Tire (Texas warehouse) has them for $125/each. That is a pretty sweet deal...I might have to spring for those now that I think I have located two more wheels for the Longhorn! __________________ '68 C20 Longhorn 50th Anniversary 400/TH400 '68 C20 Longhorn 50th Anniversary 468/TH400w/buckets '72 C20 Halfhorn (Longhorn w/o cab and front clip) '69 Flxible Cruiser (look up ugly in the dictionary)

04-10-2006, 10:53 PM	#25
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,852	Re: 16.5x9.75 with 12-16.5lt pics? It`s just hard to believe those don`t rub on a 2wd when they rub on my 4wd. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

Register or Log In To remove these advertisements.