Ot 68 lemans - The 1947 - Present Chevrolet & GMC Truck Message Board Network

jays68yak · 02-22-2004, 09:33 PM

Tossing around the idea of selling my car to pay off my truck. Here are some specs on it:

Type: 1968 Pontiac Le Mans

Engine: Pontiac 350ci: bored 0.040 over(362ci) and rebuilt.

Transmission: Rebuilt TH-350 with shift kit, B&M starshifter, and a B&M holeshot converter

Intake: Edelbrock torker II manifold

Carburetor: Holley 3310(750 cfm) 4 barrel, vac sec

Power Adder: Nitrous Cheater kit tuned to 100 shot of nitrous, with purge kit. Tank needs a new blow off valve (a small disc). Nitrous has not been used on motor but the nitrous system has had NOS in it. Was in the trunk in during a hot summer and blew the saftey disc.

Ignition: MSD 6A box , Mallory Unlite distributor, and Taylor spark plug wires

Rear End: Chris Alston's Chassis Works Fab9(Ford 9inch): Nodular third member with a detroit locker, 3.89 gears, Strange S/S axles, and Hal Aluma coil over shocks. Less then 2000 miles on the rear end. Was installed about 2 years ago and cost about $2600.

Rims: Front: 15x7" Center Line Telstars, Back: 15x8" Center Line Telstars

Tires: Front: 235/60/15 BFG Radials, Back: 295/50/15 BFG Radials

Exhaust: Hooker Competition Headers, with dual two chamber Flowmasters, turn downs before rear end.

Color: Med Blue Met.

I have some autometer gauges that I have not installed yet, they are oil pressure, volts, and water temp. They are all 2 5/8 sport cmops and will replace the cheapos that are in there under the dash now. Also if I dont sell my spare 400 block, crank, rods they will also be included. As with all parts that I can find that I have for the car. Currently it doesnt start but I just need to charge the battery and hook up the positive cable. Im moving it from the trunk to the front again. The dash is out of the car because I was in the process of building a custom fiberglass dash for it. I might include what I have done so far on the dash, the stock dash has not been harmed in anyway.

The bad, I will be the first to tell you that the body work is in no way perfect. There is a lot of bondo due to a first time welding on quarter panels. The paint is so so as it was my frist time painting.

Pictures can be found here:
http://f1.pg.photos.yahoo.com/ph/jas...dir=/68+Lemans

ask questions if you have any. Looking to get around $6500. or make me an offer. But if it doesnt put money in my pocket then i prob wont do it. No trades.

jays68yak · 02-23-2004, 01:09 PM

TTT

imaindianoutlaw · 02-23-2004, 07:24 PM

danville pa?

jays68yak · 02-23-2004, 08:03 PM

California

GloryHound · 02-24-2004, 03:51 PM

The NOS system even being there told me it was not a PA car. Inspection mechanics here are not allowed to pass a vehicle with any Nitious Oxide system parts on them. Even the fake kits!

jays68yak · 02-24-2004, 05:40 PM

well here in california, the car is smog exempt. I did smog it back in 96/97 when i first got it back on the road. With the stock rebuilt 350 and a 2 barrel it passed with flying colors. Now that it has a bigger carb, bigger heads, headers, and flows that might be a different story. I was mostly using it to play around with once i got my truck. The car basicly has sat for 3-4 years being driving once or twice a year and started randomly througth out that time.

**old Rusty C10** · 02-24-2004, 06:22 PM

well i pointed out this thread to my old lady and asked her nice and pretty please for this for my birthday and she still said "NO!!" so the least i could do is bump this up for ya LOL

jays68yak · 02-24-2004, 07:05 PM

thanks, open to offers, can deliver for $$

Alexis · 02-24-2004, 07:12 PM

have you thought about ebay?

jays68yak · 02-24-2004, 07:27 PM

yeah i have, but honestly i dont like sellign cars on ebay. too much risk for me and too much bs. Ill deal with selling it online and at car shows for a month or two before i list it on ebay. Ill prob get it in the first good guys show.

highboy_04 · 02-24-2004, 08:36 PM

is your spare 400 out of a pontiac or a chevy?

jays68yak · 02-24-2004, 08:50 PM

its a pontiac also.

Blue Beard · 02-24-2004, 11:36 PM

Can you post pics here.........tried the link several times.......wouldn't come up.....

jays68yak · 02-25-2004, 01:42 AM

Quote:

Originally posted by Blue Beard
Can you post pics here.........tried the link several times.......wouldn't come up.....

link should work now.

jays68yak · 02-25-2004, 01:43 AM

nother

jays68yak · 02-25-2004, 01:45 AM

rear end

jays68yak · 02-26-2004, 11:55 AM

comeon guys its saying buh me. Open to offers.

jays68yak · 03-11-2004, 06:53 PM

ttt

8t5Silverado · 03-11-2004, 08:16 PM

As a big GTO guy, I would say keep it, you will regret it later.

jays68yak · 03-11-2004, 08:37 PM

I know but im hoping someone can give it a good home. Im kinda of strapped for $$. I want to get out of debt. So this must go. Down the road ill work on my truck and one day find another car to build up.

jays68yak · 03-16-2004, 12:04 PM

TTT

jays68yak · 03-30-2004, 11:52 AM

Running now, $5,800

emmett · 03-30-2004, 02:18 PM

D*m wish I had some extra $$$ good greef that brings back some memories in 1970 I took my drivers test, my brother worked for a chevrolet dealership and had traded in one that looked "I said looked" like yours none of the good stuff under the hood he let me use it for my test and when I passed he let me drive it for a couple days then he *****ed about how many miles I put on it,LOL, that car was great I had to have one well I ended up with a 68 camarro did all the good stoff to it bal. ported, blueprinted 427, borg-warner T-10, 4:11 pose--------it Died 08/17/72 in a bad crash thank god no one was hurt bad my friend was driveing with two other friends I didn't go along for some reason. well didn't mean to rambel on just clicked some mems. sorry
GOOD LUCK SELLING IT HOPE FULLY7 TO A GREAT HOME
EMMETT

jays68yak · 03-30-2004, 03:25 PM

ebay
http://cgi.ebay.com/ebaymotors/ws/eB...tem=2470824036

jays68yak · 04-01-2004, 12:34 PM

did i mention im selling this?

02-22-2004, 09:33 PM	#1
jays68yak Registered User Join Date: Oct 2002 Location: Gilroy, CA Posts: 1,454	Ot 68 lemans Tossing around the idea of selling my car to pay off my truck. Here are some specs on it: Type: 1968 Pontiac Le Mans Engine: Pontiac 350ci: bored 0.040 over(362ci) and rebuilt. Transmission: Rebuilt TH-350 with shift kit, B&M starshifter, and a B&M holeshot converter Intake: Edelbrock torker II manifold Carburetor: Holley 3310(750 cfm) 4 barrel, vac sec Power Adder: Nitrous Cheater kit tuned to 100 shot of nitrous, with purge kit. Tank needs a new blow off valve (a small disc). Nitrous has not been used on motor but the nitrous system has had NOS in it. Was in the trunk in during a hot summer and blew the saftey disc. Ignition: MSD 6A box , Mallory Unlite distributor, and Taylor spark plug wires Rear End: Chris Alston's Chassis Works Fab9(Ford 9inch): Nodular third member with a detroit locker, 3.89 gears, Strange S/S axles, and Hal Aluma coil over shocks. Less then 2000 miles on the rear end. Was installed about 2 years ago and cost about $2600. Rims: Front: 15x7" Center Line Telstars, Back: 15x8" Center Line Telstars Tires: Front: 235/60/15 BFG Radials, Back: 295/50/15 BFG Radials Exhaust: Hooker Competition Headers, with dual two chamber Flowmasters, turn downs before rear end. Color: Med Blue Met. I have some autometer gauges that I have not installed yet, they are oil pressure, volts, and water temp. They are all 2 5/8 sport cmops and will replace the cheapos that are in there under the dash now. Also if I dont sell my spare 400 block, crank, rods they will also be included. As with all parts that I can find that I have for the car. Currently it doesnt start but I just need to charge the battery and hook up the positive cable. Im moving it from the trunk to the front again. The dash is out of the car because I was in the process of building a custom fiberglass dash for it. I might include what I have done so far on the dash, the stock dash has not been harmed in anyway. The bad, I will be the first to tell you that the body work is in no way perfect. There is a lot of bondo due to a first time welding on quarter panels. The paint is so so as it was my frist time painting. Pictures can be found here: http://f1.pg.photos.yahoo.com/ph/jas...dir=/68+Lemans ask questions if you have any. Looking to get around $6500. or make me an offer. But if it doesnt put money in my pocket then i prob wont do it. No trades. __________________ 1969 Chevy Project SWB Fleet, 20s, 5.3, t56, in the weeds. 1970 Chevy Truck cab on a 1979 Jimmy frame-8.1 liter 496 bbc/sm465/np203-jeds doubler-np205/d60/14bff Welded/42 tsls on recentered H1s 1998 Chevy Crew Cab K3500 SAS'd with hpd60, links and swayaway coilovers. 8.1l vortec DD/towrig "I like long walks, especially when they are taken by people who annoy me. " Last edited by jays68yak; 02-25-2004 at 01:41 AM.

02-23-2004, 01:09 PM	#2
jays68yak Registered User Join Date: Oct 2002 Location: Gilroy, CA Posts: 1,454	TTT __________________ 1969 Chevy Project SWB Fleet, 20s, 5.3, t56, in the weeds. 1970 Chevy Truck cab on a 1979 Jimmy frame-8.1 liter 496 bbc/sm465/np203-jeds doubler-np205/d60/14bff Welded/42 tsls on recentered H1s 1998 Chevy Crew Cab K3500 SAS'd with hpd60, links and swayaway coilovers. 8.1l vortec DD/towrig "I like long walks, especially when they are taken by people who annoy me. "

02-23-2004, 07:24 PM	#3
imaindianoutlaw GMC SHORT FLEET F/S Join Date: Jun 2000 Location: SOUTH WILLIAMSPORT PENNSYLVANNIA Posts: 2,117	danville pa? __________________ CHARLES WADE HEIN HVACR FOREMAN. LEWISBURG U.S.P.

02-23-2004, 08:03 PM	#4
jays68yak Registered User Join Date: Oct 2002 Location: Gilroy, CA Posts: 1,454	California __________________ 1969 Chevy Project SWB Fleet, 20s, 5.3, t56, in the weeds. 1970 Chevy Truck cab on a 1979 Jimmy frame-8.1 liter 496 bbc/sm465/np203-jeds doubler-np205/d60/14bff Welded/42 tsls on recentered H1s 1998 Chevy Crew Cab K3500 SAS'd with hpd60, links and swayaway coilovers. 8.1l vortec DD/towrig "I like long walks, especially when they are taken by people who annoy me. "

02-24-2004, 05:40 PM	#6
jays68yak Registered User Join Date: Oct 2002 Location: Gilroy, CA Posts: 1,454	well here in california, the car is smog exempt. I did smog it back in 96/97 when i first got it back on the road. With the stock rebuilt 350 and a 2 barrel it passed with flying colors. Now that it has a bigger carb, bigger heads, headers, and flows that might be a different story. I was mostly using it to play around with once i got my truck. The car basicly has sat for 3-4 years being driving once or twice a year and started randomly througth out that time. __________________ 1969 Chevy Project SWB Fleet, 20s, 5.3, t56, in the weeds. 1970 Chevy Truck cab on a 1979 Jimmy frame-8.1 liter 496 bbc/sm465/np203-jeds doubler-np205/d60/14bff Welded/42 tsls on recentered H1s 1998 Chevy Crew Cab K3500 SAS'd with hpd60, links and swayaway coilovers. 8.1l vortec DD/towrig "I like long walks, especially when they are taken by people who annoy me. "

02-24-2004, 03:51 PM	#5
GloryHound Working on a Nova. Join Date: Nov 2002 Location: ## Posts: 506	The NOS system even being there told me it was not a PA car. Inspection mechanics here are not allowed to pass a vehicle with any Nitious Oxide system parts on them. Even the fake kits!

02-24-2004, 06:22 PM	#7
old Rusty C10 Robert Olson Transport Join Date: Oct 2002 Location: recent transplant to NC USA Posts: 20,303	well i pointed out this thread to my old lady and asked her nice and pretty please for this for my birthday and she still said "NO!!" so the least i could do is bump this up for ya LOL __________________ Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!!

02-24-2004, 07:05 PM	#8
jays68yak Registered User Join Date: Oct 2002 Location: Gilroy, CA Posts: 1,454	thanks, open to offers, can deliver for $$ __________________ 1969 Chevy Project SWB Fleet, 20s, 5.3, t56, in the weeds. 1970 Chevy Truck cab on a 1979 Jimmy frame-8.1 liter 496 bbc/sm465/np203-jeds doubler-np205/d60/14bff Welded/42 tsls on recentered H1s 1998 Chevy Crew Cab K3500 SAS'd with hpd60, links and swayaway coilovers. 8.1l vortec DD/towrig "I like long walks, especially when they are taken by people who annoy me. "

02-24-2004, 07:12 PM	#9
Alexis Member since 2000 Join Date: Dec 2000 Location: Mountain View Ca / Mexico Posts: 7,879	have you thought about ebay?

02-24-2004, 07:27 PM	#10
jays68yak Registered User Join Date: Oct 2002 Location: Gilroy, CA Posts: 1,454	yeah i have, but honestly i dont like sellign cars on ebay. too much risk for me and too much bs. Ill deal with selling it online and at car shows for a month or two before i list it on ebay. Ill prob get it in the first good guys show. __________________ 1969 Chevy Project SWB Fleet, 20s, 5.3, t56, in the weeds. 1970 Chevy Truck cab on a 1979 Jimmy frame-8.1 liter 496 bbc/sm465/np203-jeds doubler-np205/d60/14bff Welded/42 tsls on recentered H1s 1998 Chevy Crew Cab K3500 SAS'd with hpd60, links and swayaway coilovers. 8.1l vortec DD/towrig "I like long walks, especially when they are taken by people who annoy me. "

02-24-2004, 08:36 PM	#11
highboy_04 Registered User Join Date: Mar 2003 Location: kansas Posts: 1,071	is your spare 400 out of a pontiac or a chevy? __________________ '67 c10 350/th350

02-24-2004, 08:50 PM	#12
jays68yak Registered User Join Date: Oct 2002 Location: Gilroy, CA Posts: 1,454	its a pontiac also. __________________ 1969 Chevy Project SWB Fleet, 20s, 5.3, t56, in the weeds. 1970 Chevy Truck cab on a 1979 Jimmy frame-8.1 liter 496 bbc/sm465/np203-jeds doubler-np205/d60/14bff Welded/42 tsls on recentered H1s 1998 Chevy Crew Cab K3500 SAS'd with hpd60, links and swayaway coilovers. 8.1l vortec DD/towrig "I like long walks, especially when they are taken by people who annoy me. "

02-24-2004, 11:36 PM	#13
Blue Beard Registered User Join Date: Jan 2003 Location: Washington State Posts: 8,834	Can you post pics here.........tried the link several times.......wouldn't come up..... __________________ 1970 Chev CST 2003 Harley Fatboy 1975 Chevrolet Step Van 1956 Chev Bel Air 1977 Blazer 2WD For Sale $3000.00 1978 Blazer 2WD For Sale $7000.00 1978 Silverado 2005 Monte Carlo

02-25-2004, 01:43 AM	#15
jays68yak Registered User Join Date: Oct 2002 Location: Gilroy, CA Posts: 1,454	nother Attached Images __________________ 1969 Chevy Project SWB Fleet, 20s, 5.3, t56, in the weeds. 1970 Chevy Truck cab on a 1979 Jimmy frame-8.1 liter 496 bbc/sm465/np203-jeds doubler-np205/d60/14bff Welded/42 tsls on recentered H1s 1998 Chevy Crew Cab K3500 SAS'd with hpd60, links and swayaway coilovers. 8.1l vortec DD/towrig "I like long walks, especially when they are taken by people who annoy me. "

02-25-2004, 01:45 AM	#16
jays68yak Registered User Join Date: Oct 2002 Location: Gilroy, CA Posts: 1,454	rear end Attached Images __________________ 1969 Chevy Project SWB Fleet, 20s, 5.3, t56, in the weeds. 1970 Chevy Truck cab on a 1979 Jimmy frame-8.1 liter 496 bbc/sm465/np203-jeds doubler-np205/d60/14bff Welded/42 tsls on recentered H1s 1998 Chevy Crew Cab K3500 SAS'd with hpd60, links and swayaway coilovers. 8.1l vortec DD/towrig "I like long walks, especially when they are taken by people who annoy me. "



Register or Log In To remove these advertisements.

02-26-2004, 11:55 AM	#17
jays68yak Registered User Join Date: Oct 2002 Location: Gilroy, CA Posts: 1,454	comeon guys its saying buh me. Open to offers. __________________ 1969 Chevy Project SWB Fleet, 20s, 5.3, t56, in the weeds. 1970 Chevy Truck cab on a 1979 Jimmy frame-8.1 liter 496 bbc/sm465/np203-jeds doubler-np205/d60/14bff Welded/42 tsls on recentered H1s 1998 Chevy Crew Cab K3500 SAS'd with hpd60, links and swayaway coilovers. 8.1l vortec DD/towrig "I like long walks, especially when they are taken by people who annoy me. "

03-11-2004, 06:53 PM	#18
jays68yak Registered User Join Date: Oct 2002 Location: Gilroy, CA Posts: 1,454	ttt __________________ 1969 Chevy Project SWB Fleet, 20s, 5.3, t56, in the weeds. 1970 Chevy Truck cab on a 1979 Jimmy frame-8.1 liter 496 bbc/sm465/np203-jeds doubler-np205/d60/14bff Welded/42 tsls on recentered H1s 1998 Chevy Crew Cab K3500 SAS'd with hpd60, links and swayaway coilovers. 8.1l vortec DD/towrig "I like long walks, especially when they are taken by people who annoy me. "

03-11-2004, 08:16 PM	#19
8t5Silverado Mudslides 'r my specialty Join Date: Dec 2003 Location: STL Posts: 1,106	As a big GTO guy, I would say keep it, you will regret it later. __________________ Always on the lookout for old cars and parts...(20s, 30s, 40s, 50s, 60s, etc.) http://www.cardomain.com/memberpage/500339

03-11-2004, 08:37 PM	#20
jays68yak Registered User Join Date: Oct 2002 Location: Gilroy, CA Posts: 1,454	I know but im hoping someone can give it a good home. Im kinda of strapped for $$. I want to get out of debt. So this must go. Down the road ill work on my truck and one day find another car to build up. __________________ 1969 Chevy Project SWB Fleet, 20s, 5.3, t56, in the weeds. 1970 Chevy Truck cab on a 1979 Jimmy frame-8.1 liter 496 bbc/sm465/np203-jeds doubler-np205/d60/14bff Welded/42 tsls on recentered H1s 1998 Chevy Crew Cab K3500 SAS'd with hpd60, links and swayaway coilovers. 8.1l vortec DD/towrig "I like long walks, especially when they are taken by people who annoy me. "

03-16-2004, 12:04 PM	#21
jays68yak Registered User Join Date: Oct 2002 Location: Gilroy, CA Posts: 1,454	TTT __________________ 1969 Chevy Project SWB Fleet, 20s, 5.3, t56, in the weeds. 1970 Chevy Truck cab on a 1979 Jimmy frame-8.1 liter 496 bbc/sm465/np203-jeds doubler-np205/d60/14bff Welded/42 tsls on recentered H1s 1998 Chevy Crew Cab K3500 SAS'd with hpd60, links and swayaway coilovers. 8.1l vortec DD/towrig "I like long walks, especially when they are taken by people who annoy me. "

03-30-2004, 11:52 AM	#22
jays68yak Registered User Join Date: Oct 2002 Location: Gilroy, CA Posts: 1,454	Running now, $5,800 __________________ 1969 Chevy Project SWB Fleet, 20s, 5.3, t56, in the weeds. 1970 Chevy Truck cab on a 1979 Jimmy frame-8.1 liter 496 bbc/sm465/np203-jeds doubler-np205/d60/14bff Welded/42 tsls on recentered H1s 1998 Chevy Crew Cab K3500 SAS'd with hpd60, links and swayaway coilovers. 8.1l vortec DD/towrig "I like long walks, especially when they are taken by people who annoy me. "

03-30-2004, 02:18 PM	#23
emmett Registered User Join Date: Nov 2003 Location: Kaukauna WI Posts: 193	Lemans Dm wish I had some extra $$$ good greef that brings back some memories in 1970 I took my drivers test, my brother worked for a chevrolet dealership and had traded in one that looked "I said looked" like yours none of the good stuff under the hood he let me use it for my test and when I passed he let me drive it for a couple days then he ****ed about how many miles I put on it,LOL, that car was great I had to have one well I ended up with a 68 camarro did all the good stoff to it bal. ported, blueprinted 427, borg-warner T-10, 4:11 pose--------it Died 08/17/72 in a bad crash thank god no one was hurt bad my friend was driveing with two other friends I didn't go along for some reason. well didn't mean to rambel on just clicked some mems. sorry GOOD LUCK SELLING IT HOPE FULLY7 TO A GREAT HOME EMMETT __________________ Kaukauna WI Airplaines don't land here they are sucked down

03-30-2004, 03:25 PM	#24
jays68yak Registered User Join Date: Oct 2002 Location: Gilroy, CA Posts: 1,454	ebay http://cgi.ebay.com/ebaymotors/ws/eB...tem=2470824036 __________________ 1969 Chevy Project SWB Fleet, 20s, 5.3, t56, in the weeds. 1970 Chevy Truck cab on a 1979 Jimmy frame-8.1 liter 496 bbc/sm465/np203-jeds doubler-np205/d60/14bff Welded/42 tsls on recentered H1s 1998 Chevy Crew Cab K3500 SAS'd with hpd60, links and swayaway coilovers. 8.1l vortec DD/towrig "I like long walks, especially when they are taken by people who annoy me. "

04-01-2004, 12:34 PM	#25
jays68yak Registered User Join Date: Oct 2002 Location: Gilroy, CA Posts: 1,454	did i mention im selling this? __________________ 1969 Chevy Project SWB Fleet, 20s, 5.3, t56, in the weeds. 1970 Chevy Truck cab on a 1979 Jimmy frame-8.1 liter 496 bbc/sm465/np203-jeds doubler-np205/d60/14bff Welded/42 tsls on recentered H1s 1998 Chevy Crew Cab K3500 SAS'd with hpd60, links and swayaway coilovers. 8.1l vortec DD/towrig "I like long walks, especially when they are taken by people who annoy me. "

Register or Log In To remove these advertisements.