|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
|
|
10-02-2003, 11:36 PM
|
#1 |
|
Join Date: Dec 1999
Location: Eastern - Manitoba Canada, Winnipeg
Posts: 4,369
|
tilt column not tilting
Anyone have any ideas on why a tilt would not tilt.. its stuck in the lowest position for some reason. I'm prepared to tear it apart if necessary. Just gottas browse up on how ...LOL. Rod
__________________
Senior active founding member. 70 3/4 ton GMC Suburban 4x4 250/4 spd. 71 1/2 ton Suburban Chevy 4x4, 350/350 72 Chev 1 ton tow truck 402BB w/Holmes 440 wrecker on propane 2005 FLSTSCI Harley Springer 85 FXSB Harley Lowrider 72 Triumph 650 Bonneville 5spd "Poor people don't have hobbies" Quote from wife. |
|
|
|
10-03-2003, 01:20 AM
|
#2 |
|
Account Suspended
Join Date: Apr 2000
Location: Grants Pass, Oregon
Posts: 1,580
|
I had that happen a few years back on a 72 Highlander I had and I removed the wheel, spraied "brake clean" down the shaft. almost 1/2 a can. Then it actually freed up everything. Then I hit it with wd-40 and it was good as new. Im not sure if it was the same problem as yours, but it worked for me and it worked great. I felt I had nothing to loose as I was ready to pull the complete thing apart anyway so I went for it!
Good luck. |
|
|
|
|
10-05-2003, 11:11 PM
|
#3 |
|
Join Date: Dec 1999
Location: Eastern - Manitoba Canada, Winnipeg
Posts: 4,369
|
I lubed it up today but got impatient and took it apart anyway... and it works now... it was just loaded with debris and rust. Rod
__________________
Senior active founding member. 70 3/4 ton GMC Suburban 4x4 250/4 spd. 71 1/2 ton Suburban Chevy 4x4, 350/350 72 Chev 1 ton tow truck 402BB w/Holmes 440 wrecker on propane 2005 FLSTSCI Harley Springer 85 FXSB Harley Lowrider 72 Triumph 650 Bonneville 5spd "Poor people don't have hobbies" Quote from wife. |
|
|
|
|
| Bookmarks |
|
|
Hybrid Mode
