402 engine logo - The 1947 - Present Chevrolet & GMC Truck Message Board Network

GMC Jim · 12-19-2002, 07:58 PM

Anyone know wher I can find the appropiate emblem that should be mounted on each front fender indicating a 402 engine ?...Jim

72bigblock · 12-19-2002, 08:01 PM

on the 71-72 it would read 8-400 chris

GMC Jim · 12-19-2002, 08:04 PM

Thanks 72bigblock....have a source for these?? for 1971 GMC 402 pickup.....

lukecp · 12-19-2002, 08:09 PM

They are readily mass-produced.
Try: GMC Paul pickup parts, Classic Heartbeat pickup parts, LMC truck, Brothers, Chevy Duty, or just about any other parts vendor. All have webistes, do a search to find the exact URL. Good luck!

**Classic Heartbeat** · 12-19-2002, 09:12 PM

Here is a link to our emblems page. Click on the descriptions and you will see a picture of the emblems.
http://www.classicheartbeat.com/emblems.htm
WES www.ClassicHeartbeat.com

jhow66 · 12-21-2002, 02:02 AM

Made these out of 8-400 that were on my truck:

71Blazer · 12-21-2002, 04:25 AM

I like the 502 emblem. Where did you get the 5-0-2?

GMC Jim · 12-21-2002, 04:53 AM

your ' 502 ' looks great !!!!!... how do I obtain same thing with ' 402' ??????

jhow66 · 12-21-2002, 03:21 PM

Sorry took so long to reply--been away. As to the 502 logo, Ausley's Chevelle in N.C. has this 502 logo that they use on thier Chevelle emblems to replace,say, a 454 emblem. It is the perfect size to fit inside the 8-400 emblem after you grind out the 400 with a suitable tool (I used a dremel). I painted the ground out area flat black then stuck the 502 emblem on as it comes with self stick tape already on it. (502 emblems are $30.00 + shipping.
As to the 402, did the 6 cly. trucks have a cid emblem? If so you could cut out a 2 and then grind out a 0 and install the 2--wa-la a 402 emblem. Hope ths helps.
www.chevelle.com

Longhorn Man · 12-22-2002, 01:21 AM

Yeah...there was 292 badges, but you just never seem to see them.
I saw a set once on a crusty old work truck in Tx.

neonlarry · 12-22-2002, 02:00 AM

Don't the 292 badges look different? I have only seen then a couple of times, but the ones I have seen didn't look like the 8-350 and 8-400 ones. But, they could be from something else too, so I am not sure.

**Joesjunk** · 12-22-2002, 05:34 PM

Yah, The 292 badges were different than all of the V-8 ones.

slam33 · 12-22-2002, 07:51 PM

Classic Ind has some too

12-19-2002, 07:58 PM	#1
GMC Jim Senior Member Join Date: Dec 2002 Location: Portland, Oregon Posts: 901	402 engine logo Anyone know wher I can find the appropiate emblem that should be mounted on each front fender indicating a 402 engine ?...Jim

12-19-2002, 08:04 PM	#3
GMC Jim Senior Member Join Date: Dec 2002 Location: Portland, Oregon Posts: 901	Thanks 72bigblock....have a source for these?? for 1971 GMC 402 pickup..... __________________ '71 GMC;fleetside;PB/PS/AC/CC/402 Eng./Custom Paint/110,000act miles/3 fuel tanks(52gal).

12-19-2002, 08:09 PM	#4
lukecp Formerly yellow72custom Join Date: May 2001 Location: Austin, TX Posts: 7,531	They are readily mass-produced. Try: GMC Paul pickup parts, Classic Heartbeat pickup parts, LMC truck, Brothers, Chevy Duty, or just about any other parts vendor. All have webistes, do a search to find the exact URL. Good luck! __________________ '72 Chevy C10 Mild 350/TH350/3.07. Ochre/White. Old high school ride. '70 GMC C2500 '62 327 4bbl/SM465/4.56-geared Dana 60. White/White. Project or parts truck. '97 Saturn SL DD. 1.9/5-speed. 40+ highway mpg

12-19-2002, 09:12 PM	#5
Classic Heartbeat Project Junkie! Fishing Poor!! Join Date: Dec 1999 Location: Olympia,Wa. 98512 Posts: 10,768	Here is a link to our emblems page. Click on the descriptions and you will see a picture of the emblems. http://www.classicheartbeat.com/emblems.htm WES www.ClassicHeartbeat.com __________________ On-line catolog Classic Heartbeat Pickup Parts WEHEPP@comcast.net Call us Toll Free (888) 338-2502 Like Us on Facebook No appointment necessary. 72 BB Chevy Custom Deluxe / Custom Camper 67 I-6 (Soon to be 5.7 LS1) Panel 68 BB Chevy Short Bed 72 6.0 LQ9 Short Bed Chevy 4X4 Olympia's fastest growing truck parts supplier. Olympia's home for Wayward Chevys

12-21-2002, 02:02 AM	#6
jhow66 Registered User Join Date: Jun 2002 Location: Knoxville Tenn. Posts: 3,058	Made these out of 8-400 that were on my truck: Attached Images __________________ 56 Chevy Bel-Air 2dr. HT (purchased new) 71 Chevy Cheyenne SWB PU (502HO) 65 GMC short bed step--work in progress and my gofer

12-19-2002, 08:01 PM	#2
72bigblock Registered User Join Date: Oct 2002 Location: rockford il. Posts: 190	on the 71-72 it would read 8-400 chris

12-21-2002, 04:25 AM	#7
71Blazer Goodbye Darlin' Join Date: Nov 2001 Location: Coupeville, WA USA Posts: 330	I like the 502 emblem. Where did you get the 5-0-2? __________________ 1971 Blazer CST SOLD!

12-21-2002, 04:53 AM	#8
GMC Jim Senior Member Join Date: Dec 2002 Location: Portland, Oregon Posts: 901	your ' 502 ' looks great !!!!!... how do I obtain same thing with ' 402' ??????

12-21-2002, 03:21 PM	#9
jhow66 Registered User Join Date: Jun 2002 Location: Knoxville Tenn. Posts: 3,058	logo Sorry took so long to reply--been away. As to the 502 logo, Ausley's Chevelle in N.C. has this 502 logo that they use on thier Chevelle emblems to replace,say, a 454 emblem. It is the perfect size to fit inside the 8-400 emblem after you grind out the 400 with a suitable tool (I used a dremel). I painted the ground out area flat black then stuck the 502 emblem on as it comes with self stick tape already on it. (502 emblems are $30.00 + shipping. As to the 402, did the 6 cly. trucks have a cid emblem? If so you could cut out a 2 and then grind out a 0 and install the 2--wa-la a 402 emblem. Hope ths helps. www.chevelle.com __________________ 56 Chevy Bel-Air 2dr. HT (purchased new) 71 Chevy Cheyenne SWB PU (502HO) 65 GMC short bed step--work in progress and my gofer

12-22-2002, 01:21 AM	#10
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	Yeah...there was 292 badges, but you just never seem to see them. I saw a set once on a crusty old work truck in Tx.

12-22-2002, 02:00 AM	#11
neonlarry Registered User Join Date: Feb 2002 Location: Vacaville, CA Posts: 2,746	Don't the 292 badges look different? I have only seen then a couple of times, but the ones I have seen didn't look like the 8-350 and 8-400 ones. But, they could be from something else too, so I am not sure. __________________ 70 C/10 Light Red 350/TH350, HEI, Duals w/40 series Flows, 91 seat, LED taillights 99 Pontiac S/C GTP, SLP Ram Air hood, GMPP Konis & springs 95 Neon ACR, MP PCM, AFX UDP, 3.0 CAI

12-22-2002, 05:34 PM	#12
Joesjunk Senior Member Join Date: May 2001 Location: Independence MO. Posts: 7,702	Yah, The 292 badges were different than all of the V-8 ones. __________________ 72 3/4t Custom Deluxe 402/auto 66k Original paint 71 3/4t 4x4 Custom Deluxe 10k original miles Original paint 71 3/4t Cheyenne 402 70k original paint 72 3/4t 4x4 Custom deluxe 72 3/4t 4x4 Custom deluxe 91k original paint 72 Cheyenne/30 Dually 69 Camaro SS396 4-speed 13 GMC 2500HD Duramax I bought new 05 Jeep Wrangler "Willys Edition" 12k miles (I bought new) 85 3/4 ton 4x4 Scottsdale 33k miles original paint 86 1 ton 4x4 SRW Silverado 454 restored 80 1 ton 4x4 SRW Silverado 9,434 original miles!! original paint 95 GMC 1 ton dually 4x4 my dad bought new 95 GMC 3/4 ton 4x4, regular cab 454, 31k original miles 2002 2500HD 4x4 regular cab 6.0L 67k miles 2002 2500HD 4x4 regular cab 8.1L 28k miles 2003 GMC 2500HD 4x4 regular cab Diesel 93k miles 67-72 Parts for sale

12-22-2002, 07:51 PM	#13
slam33 Registered User Join Date: Aug 2001 Location: Long Beach, Ca Posts: 1,432	Classic Ind has some too __________________ 71 LWB 350/350still working on it but it's going tp be sweet. www.geocities.com/stevemau/slam33page.html " TARGET=_blank>http://www.geocities.com/stevemau/slam33page.html?1004806705410 </A>



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.