New Truck - The 1947 - Present Chevrolet & GMC Truck Message Board Network

gunrunner95 · 10-27-2013, 05:02 PM

Just picked up a 72 Cheyenne Super C10 with im told C20 rear suspension. Factory air, Power steering, power brakes, bu@cket seats. Rust isnt too bad and its primered. Vefore everyone asks Ill post picst. as soon as i get off work tonigh

Evaded · 10-27-2013, 05:54 PM

Welcome and Ill be looking out for those pics!

Eric (Evaded)

gunrunner95 · 10-27-2013, 10:47 PM

I'm having trouble posting the pics but I am trying

gunrunner95 · 10-27-2013, 11:40 PM

Hopefully these two work

gunrunner95 · 10-27-2013, 11:50 PM

Some More

gunrunner95 · 10-28-2013, 12:04 AM

Here's the last of them. The last one isn't of the truck obviously but i thought I'd share anyway, it's the 2nd largest movable crane in the world it was here in town for a few months at the refinery.

**70cst** · 10-28-2013, 12:46 AM

Looks like a great project

In The Ten Ring · 10-29-2013, 05:09 PM

Quote:

Originally Posted by gunrunner95

Here's the last of them. The last one isn't of the truck obviously but i thought I'd share anyway, it's the 2nd largest movable crane in the world it was here in town for a few months at the refinery.

Look! And engine hoist!

Nice project start man.

gunrunner95 · 10-28-2013, 12:51 AM

Thanks 70cst I appreciate it.

OARNGESI · 10-28-2013, 01:59 AM

looks like a nice project what the plans for it

gunrunner95 · 10-28-2013, 02:05 AM

Get a motor put in it.... After its running and driving disc brakes all the way around.Rust repair in there somewhere. Fix up the interior ( vacuum & tlc maybe be all it needs)Might bag it im not sure, when its all done i want to paint it a really dark blue.

gunrunner95 · 10-28-2013, 03:49 PM

I've read of people using dealer service manuals for these trucks. Does anyone know where might I be able to locate one?

Tinkermc · 10-28-2013, 08:08 PM

welcome to the forum and have loads of fun with the new toy.

gunrunner95 · 10-28-2013, 08:18 PM

Thanks for the Welcome guys. I've been lurking for awhile and waiting till I had enough $ and actually bought the truck before I.poasted anything

**WIDESIDE72** · 10-28-2013, 08:41 PM

Manuals come up from time to time on the parts board. You can post a wtb as well. Ebay is also a good source. Many aftermarket suppliers of parts for 67-72 have repro manuals. Check with site vendors.

What made the seller say it has a c20 rear axle? Does it have leaf springs? If so, that doesnt mean it is a 3/4 ton axle. 67-72 could be ordered either with coil or leaf springs. The leafs do give a little more carrying capacity, at the expense of ride quality.

Bomp · 10-28-2013, 08:44 PM

Welcome and will follow along.
Good luck and have fun.

**WIDESIDE72** · 10-28-2013, 08:43 PM

Judging from your first photo, those sears look too tall for dactory buckets. How about a photo of the spid label on inside of glovebox?

Looks like a solid start for a project! Welcome to the site!

gunrunner95 · 10-28-2013, 09:06 PM

Wideside- I bought the truck from a friend and he was told the coil springs were off of a 3/4 ton... Im not sure if this is true but I aim to find out. The SPID sheet is not there.... I plan on taking the terrible seat covers off as the upholstry underneath seems good as far as I can tell, they may well not be original. I appreciate the info on the manuals btw.
Bomp- Thank you i appreciate it.

gunrunner95 · 10-28-2013, 10:27 PM

Any recommendations for the best place to get patch panels for the rust? Best as i can tell the only rust is on the underside of the driver door and the floor/ rocker panel underneath(it appears to have sat without a gasket at the bottom of the window allowing water into.the door) and the small hole on passenger door.

Evaded · 10-29-2013, 02:48 PM

Looks good... I would go with Ebay for patch panels imo. If you want to stay more original theres always someone cutting up old cabs for patches.

Eric (Evaded)

gunrunner95 · 10-29-2013, 05:13 PM

Thanks guys I appreciate it. To give perspective on that crane i was 1-1.5 miles away at least. Wideside- the buckets do not appear to be factory. Will post a pic soon

gunrunner95 · 10-29-2013, 11:18 PM

Wideside72- Heres a few pics of the seats and where the back attaches to the bottom (to me it looks like they should fold but I'm not sure.)

**WIDESIDE72** · 10-29-2013, 11:24 PM

Yea. Not truck seats. No biggie though. Run them if you like em!

gunrunner95 · 10-29-2013, 11:29 PM

They're comfortable and they will do for now at least, whats weird is when I pulled back some of the carpet at the edge of the door to get a better look at the rust the black carpet was put on top of some red carpet that looked to be in good shape, but I couldn't see alot of it.

Bomp · 10-29-2013, 11:51 PM

I've bought patch panels from LMC.
Have heard panels from Top Banana are great.
Original sheet metal always seems to fit best.

10-27-2013, 05:02 PM	#1
gunrunner95 Registered User Join Date: Jul 2013 Location: Ponca City (North Central) Oklahoma Posts: 60	New Truck Just picked up a 72 Cheyenne Super C10 with im told C20 rear suspension. Factory air, Power steering, power brakes, bu@cket seats. Rust isnt too bad and its primered. Vefore everyone asks Ill post picst. as soon as i get off work tonigh __________________ 1972 Chevy C-10 1/2 ton longbed project 1989 Chevy 1/2 ton shortbed "If a man does his best, what else is there?" "A pint of sweat saves a gallon of blood"-George Patton

10-27-2013, 05:54 PM	#2
Evaded Registered User Join Date: Apr 2013 Location: San Antonio TX Posts: 424	Re: New Truck Welcome and Ill be looking out for those pics! Eric (Evaded) __________________ If I see a Zombie.. Im runnin it over with my Truck.

10-27-2013, 10:47 PM	#3
gunrunner95 Registered User Join Date: Jul 2013 Location: Ponca City (North Central) Oklahoma Posts: 60	Re: New Truck I'm having trouble posting the pics but I am trying __________________ 1972 Chevy C-10 1/2 ton longbed project 1989 Chevy 1/2 ton shortbed "If a man does his best, what else is there?" "A pint of sweat saves a gallon of blood"-George Patton

10-27-2013, 11:40 PM	#4
gunrunner95 Registered User Join Date: Jul 2013 Location: Ponca City (North Central) Oklahoma Posts: 60	Re: New Truck Hopefully these two work Attached Images __________________ 1972 Chevy C-10 1/2 ton longbed project 1989 Chevy 1/2 ton shortbed "If a man does his best, what else is there?" "A pint of sweat saves a gallon of blood"-George Patton

10-27-2013, 11:50 PM	#5
gunrunner95 Registered User Join Date: Jul 2013 Location: Ponca City (North Central) Oklahoma Posts: 60	Re: New Truck Some More Attached Images __________________ 1972 Chevy C-10 1/2 ton longbed project 1989 Chevy 1/2 ton shortbed "If a man does his best, what else is there?" "A pint of sweat saves a gallon of blood"-George Patton

10-28-2013, 12:04 AM	#6
gunrunner95 Registered User Join Date: Jul 2013 Location: Ponca City (North Central) Oklahoma Posts: 60	Re: New Truck Here's the last of them. The last one isn't of the truck obviously but i thought I'd share anyway, it's the 2nd largest movable crane in the world it was here in town for a few months at the refinery. Attached Images __________________ 1972 Chevy C-10 1/2 ton longbed project 1989 Chevy 1/2 ton shortbed "If a man does his best, what else is there?" "A pint of sweat saves a gallon of blood"-George Patton

10-28-2013, 12:46 AM	#7
70cst Senior Member Join Date: Feb 2001 Location: New Madison, Ohio Posts: 21,374	Re: New Truck Looks like a great project __________________ A husband can be right...or...A husband can be happy. 67-72 Chevy and GMC Trucks...The Classic Truck for the Classic Folk. 1970 CST Two tone green, 402BB, 400 Automatic, Tach, Buckets, AC, AM-FM, Tilt, GM CB, GM 8 Tract, LWB, etc JOHN 17:3...The better side of "LIFE" Remember: Everyday is a good day...Some are just gooder!

10-28-2013, 12:51 AM	#9
gunrunner95 Registered User Join Date: Jul 2013 Location: Ponca City (North Central) Oklahoma Posts: 60	Re: New Truck Thanks 70cst I appreciate it. __________________ 1972 Chevy C-10 1/2 ton longbed project 1989 Chevy 1/2 ton shortbed "If a man does his best, what else is there?" "A pint of sweat saves a gallon of blood"-George Patton

10-28-2013, 01:59 AM	#10
OARNGESI Registered User Join Date: Sep 2008 Location: CASA GRANDE AZ Posts: 4,276	Re: New Truck looks like a nice project what the plans for it __________________ 70 SWB STEPSIDE 70 BLAZER 09 challenger

10-28-2013, 02:05 AM	#11
gunrunner95 Registered User Join Date: Jul 2013 Location: Ponca City (North Central) Oklahoma Posts: 60	Re: New Truck Get a motor put in it.... After its running and driving disc brakes all the way around.Rust repair in there somewhere. Fix up the interior ( vacuum & tlc maybe be all it needs)Might bag it im not sure, when its all done i want to paint it a really dark blue. __________________ 1972 Chevy C-10 1/2 ton longbed project 1989 Chevy 1/2 ton shortbed "If a man does his best, what else is there?" "A pint of sweat saves a gallon of blood"-George Patton

10-28-2013, 03:49 PM	#12
gunrunner95 Registered User Join Date: Jul 2013 Location: Ponca City (North Central) Oklahoma Posts: 60	Re: New Truck I've read of people using dealer service manuals for these trucks. Does anyone know where might I be able to locate one? __________________ 1972 Chevy C-10 1/2 ton longbed project 1989 Chevy 1/2 ton shortbed "If a man does his best, what else is there?" "A pint of sweat saves a gallon of blood"-George Patton

10-28-2013, 08:08 PM	#13
Tinkermc Registered User Join Date: Jul 2011 Location: Farmville, Va Posts: 3,026	Re: New Truck welcome to the forum and have loads of fun with the new toy.

10-28-2013, 08:18 PM	#14
gunrunner95 Registered User Join Date: Jul 2013 Location: Ponca City (North Central) Oklahoma Posts: 60	Re: New Truck Thanks for the Welcome guys. I've been lurking for awhile and waiting till I had enough $ and actually bought the truck before I.poasted anything __________________ 1972 Chevy C-10 1/2 ton longbed project 1989 Chevy 1/2 ton shortbed "If a man does his best, what else is there?" "A pint of sweat saves a gallon of blood"-George Patton

10-28-2013, 08:41 PM	#15
WIDESIDE72 Senior Member Join Date: Aug 2008 Location: Cedar Park, Texas Posts: 7,500	Re: New Truck Manuals come up from time to time on the parts board. You can post a wtb as well. Ebay is also a good source. Many aftermarket suppliers of parts for 67-72 have repro manuals. Check with site vendors. What made the seller say it has a c20 rear axle? Does it have leaf springs? If so, that doesnt mean it is a 3/4 ton axle. 67-72 could be ordered either with coil or leaf springs. The leafs do give a little more carrying capacity, at the expense of ride quality.

10-28-2013, 08:44 PM	#16
Bomp Registered User Join Date: Apr 2011 Location: . Posts: 3,104	Re: New Truck Welcome and will follow along. Good luck and have fun.



Register or Log In To remove these advertisements.

10-28-2013, 08:43 PM	#17
WIDESIDE72 Senior Member Join Date: Aug 2008 Location: Cedar Park, Texas Posts: 7,500	Re: New Truck Judging from your first photo, those sears look too tall for dactory buckets. How about a photo of the spid label on inside of glovebox? Looks like a solid start for a project! Welcome to the site!

10-28-2013, 09:06 PM	#18
gunrunner95 Registered User Join Date: Jul 2013 Location: Ponca City (North Central) Oklahoma Posts: 60	Re: New Truck Wideside- I bought the truck from a friend and he was told the coil springs were off of a 3/4 ton... Im not sure if this is true but I aim to find out. The SPID sheet is not there.... I plan on taking the terrible seat covers off as the upholstry underneath seems good as far as I can tell, they may well not be original. I appreciate the info on the manuals btw. Bomp- Thank you i appreciate it. __________________ 1972 Chevy C-10 1/2 ton longbed project 1989 Chevy 1/2 ton shortbed "If a man does his best, what else is there?" "A pint of sweat saves a gallon of blood"-George Patton

10-28-2013, 10:27 PM	#19
gunrunner95 Registered User Join Date: Jul 2013 Location: Ponca City (North Central) Oklahoma Posts: 60	Re: New Truck Any recommendations for the best place to get patch panels for the rust? Best as i can tell the only rust is on the underside of the driver door and the floor/ rocker panel underneath(it appears to have sat without a gasket at the bottom of the window allowing water into.the door) and the small hole on passenger door. __________________ 1972 Chevy C-10 1/2 ton longbed project 1989 Chevy 1/2 ton shortbed "If a man does his best, what else is there?" "A pint of sweat saves a gallon of blood"-George Patton

10-29-2013, 02:48 PM	#20
Evaded Registered User Join Date: Apr 2013 Location: San Antonio TX Posts: 424	Re: New Truck Looks good... I would go with Ebay for patch panels imo. If you want to stay more original theres always someone cutting up old cabs for patches. Eric (Evaded) __________________ If I see a Zombie.. Im runnin it over with my Truck.

10-29-2013, 05:13 PM	#21
gunrunner95 Registered User Join Date: Jul 2013 Location: Ponca City (North Central) Oklahoma Posts: 60	Re: New Truck Thanks guys I appreciate it. To give perspective on that crane i was 1-1.5 miles away at least. Wideside- the buckets do not appear to be factory. Will post a pic soon __________________ 1972 Chevy C-10 1/2 ton longbed project 1989 Chevy 1/2 ton shortbed "If a man does his best, what else is there?" "A pint of sweat saves a gallon of blood"-George Patton

10-29-2013, 11:18 PM	#22
gunrunner95 Registered User Join Date: Jul 2013 Location: Ponca City (North Central) Oklahoma Posts: 60	Re: New Truck Wideside72- Heres a few pics of the seats and where the back attaches to the bottom (to me it looks like they should fold but I'm not sure.) Attached Images __________________ 1972 Chevy C-10 1/2 ton longbed project 1989 Chevy 1/2 ton shortbed "If a man does his best, what else is there?" "A pint of sweat saves a gallon of blood"-George Patton

10-29-2013, 11:24 PM	#23
WIDESIDE72 Senior Member Join Date: Aug 2008 Location: Cedar Park, Texas Posts: 7,500	Re: New Truck Yea. Not truck seats. No biggie though. Run them if you like em!

10-29-2013, 11:29 PM	#24
gunrunner95 Registered User Join Date: Jul 2013 Location: Ponca City (North Central) Oklahoma Posts: 60	Re: New Truck They're comfortable and they will do for now at least, whats weird is when I pulled back some of the carpet at the edge of the door to get a better look at the rust the black carpet was put on top of some red carpet that looked to be in good shape, but I couldn't see alot of it. __________________ 1972 Chevy C-10 1/2 ton longbed project 1989 Chevy 1/2 ton shortbed "If a man does his best, what else is there?" "A pint of sweat saves a gallon of blood"-George Patton

10-29-2013, 11:51 PM	#25
Bomp Registered User Join Date: Apr 2011 Location: . Posts: 3,104	Re: New Truck I've bought patch panels from LMC. Have heard panels from Top Banana are great. Original sheet metal always seems to fit best.

Register or Log In To remove these advertisements.