The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > General Forums > Alternate Tinkerings

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 07-29-2018, 05:52 PM   #1
Ironhorse
Senior Member
 
Ironhorse's Avatar
 
Join Date: Jul 2001
Location: Wellington, Ks
Posts: 10,284
'57 2Dr Sedan

In the past I have posted about my '57 2Dr. sedan I used to 1/4 mile several years ago. Have been wanting to get back to work on it to finish the re-build and for one reason or another it has just not happened. Got down in the back really severe late April and on into June. Could not hardly stand for long periods let alone bend over a fender. Finally got that situation taken care of and then along comes summer heat and Kansas humidity. Being almost 70 years young I don't do either one near as well as I used to. Bit cooler now, in the 90's instead of the triple digits. Now having issues with my right hand thumb. Stiff, painful and "locks" up til really have to work at it to get it to bend around a wrench. Taking Aleve tablets but don't see much relief. Going to see a specialist first part of August, looks like a hand surgery is in the future. Can't seem to catch a break in the wrenching department.

Okay, enough whining.

Yesterday got started on digging the '57 out of the garage and all the stuff and treasures stacked around it. NOT on top of it but around it, LOL.

Just thought would post up a couple pics of it to prove I really do have a '57 2Dr, LOL. '64 Chevelle 283 .030 over bore, Melling Super Street hydraulic cam, stock '57 GM dual four intake with Carter WCFB carbs, reproduction linkage, Muncie M-21 4 spd, Mr. Gasket shifter, headers and 3:55 pegleg rear gears. Converted to front disc brakes some years ago. Dusty and badly needs a good bath after get it out of the garage. Retired mechanic friend of mine with two "good" hands is going to help me get it back up and running. Then goes to another friend of mine who did the body and paint on my '71 Chevelle. Really keyed up about at last being able to get it on the road again. Sorry for the rambling and long post but sure has been a long road to getting even this far.

Will post up more pics as the progress goes along, but at least am working toward that end again.
Attached Images
     
__________________
1971 Chevy 1/2T 4x4 LWB 350 V-8
Was sm465-now 350TH/np205
Tilt, Tach, Towhooks
Original Truck AM/FM
Wellington, Ks
Ironhorse is offline   Reply With Quote
Old 07-29-2018, 06:15 PM   #2
mongocanfly
Post Whore

 
mongocanfly's Avatar
 
Join Date: May 2015
Location: Alabama
Posts: 14,662
Re: '57 2Dr Sedan

Nice.....really nice....looks like it's in great shape....would this be considered "a garage find"?
__________________
Mongo...aka Greg

RIP Dad
RIP Jesse

1981 C30 LQ9 NV4500..http://67-72chevytrucks.com/vboard/s...d.php?t=753598
Mongos AD- LS3 TR6060...http://67-72chevytrucks.com/vboard/s...34#post8522334
Columbus..the 1957 IH 4x4...http://67-72chevytrucks.com/vboard/s...63#post8082563
2023 Chevy Z71..daily driver
mongocanfly is offline   Reply With Quote
Old 07-29-2018, 09:37 PM   #3
Ironhorse
Senior Member
 
Ironhorse's Avatar
 
Join Date: Jul 2001
Location: Wellington, Ks
Posts: 10,284
Re: '57 2Dr Sedan

Ha, not sure I would classify it as a "garage find". I always knew it was there, just lots of stuff and treasures packed around it. Decided that I was not getting any younger, pushing 70 years young right now. Time doesn't drag on as you get older, seems to be on a dead run sometimes. The track I used to run on locally is headed for a re-birth! See the post in General Discussion if interested. Will post more on that as I hear of news and information.
__________________
1971 Chevy 1/2T 4x4 LWB 350 V-8
Was sm465-now 350TH/np205
Tilt, Tach, Towhooks
Original Truck AM/FM
Wellington, Ks
Ironhorse is offline   Reply With Quote
Old 07-31-2018, 03:57 PM   #4
JimKshortstep4x4
Senior Member
 
Join Date: Jul 2001
Location: Muskegon,MI,USA
Posts: 6,026
Re: '57 2Dr Sedan

Looks like a nice 57! Glad to see that you are getting back into it. Good luck with your project.

Jim
__________________
1971 Shortbox step side 4x4, 350 sbc, 3:07 rear end
1965 Impala SS 400 sbc, Muncie rock crusher
1966 Impala SS 396 bbc, TH 400
1969 El Camino, 350 sbc, TH 350
1971 Snowplow built on a Blazer frame
1972 GMC Short bed, stepside, TH 400, 427 BBC
JimKshortstep4x4 is offline   Reply With Quote
Old 07-29-2018, 09:34 PM   #5
Clyde65
1965 Chevy C10, 2005 4.8L/4l60
 
Clyde65's Avatar
 
Join Date: Aug 2004
Location: DFW Texas
Posts: 8,545
Re: '57 2Dr Sedan

Awesome! I love the tri-5’s!
__________________
Clyde65

Rebuild of Clyde
http://67-72chevytrucks.com/vboard/s...84#post8338184

69 Aristocrat Lo Liner build
http://67-72chevytrucks.com/vboard/s...84#post7561684



support our troops!
Clyde65 is offline   Reply With Quote
Old 08-01-2018, 01:07 AM   #6
franken
Registered User
 
Join Date: Jun 2013
Location: Somewhere
Posts: 3,100
Re: '57 2Dr Sedan

55 and 57 are my favorites. I hope you keep the pics coming.
franken is offline   Reply With Quote
Old 08-01-2018, 06:03 AM   #7
Ironhorse
Senior Member
 
Ironhorse's Avatar
 
Join Date: Jul 2001
Location: Wellington, Ks
Posts: 10,284
Re: '57 2Dr Sedan

Will add some more pics after get new shoes on and get the ol gal outside for a bath and some sun shine. Hasn't seen the light of day for quite some time.
__________________
1971 Chevy 1/2T 4x4 LWB 350 V-8
Was sm465-now 350TH/np205
Tilt, Tach, Towhooks
Original Truck AM/FM
Wellington, Ks
Ironhorse is offline   Reply With Quote
Old 08-04-2018, 07:28 AM   #8
Ol Blue K20
Proprietor of Dale's Corner
 
Ol Blue K20's Avatar
 
Join Date: Nov 2012
Location: Vacaville , CA
Posts: 16,237
Re: '57 2Dr Sedan

Subbed to tag along and watch
__________________
"Some Days Chickens And Some Days Feathers"

Dale
XNGH ECV Sam Brannan 1004

R.I.P. 67ChevyRedneck
R.I.P. Grumpy Old Man
R.I.P. FleetsidePaul
Ol Blue K20 is online now   Reply With Quote
Old 08-25-2018, 06:39 PM   #9
Ironhorse
Senior Member
 
Ironhorse's Avatar
 
Join Date: Jul 2001
Location: Wellington, Ks
Posts: 10,284
Re: '57 2Dr Sedan

Got the '57 out of the garage today and moved to a friend's house/shop. He is going to do some work on it that my hand's won't allow me to do right now. Had two steroid shots by a harpoon about 26-28 inches long in thumb joint and wrist. I was a big boy and didn't cry but it hurt like hell,

Long way to go but really getting pumped up, ready to bang gears again in my street rod. First time it has seen day light in quite some time.
Attached Images
     
__________________
1971 Chevy 1/2T 4x4 LWB 350 V-8
Was sm465-now 350TH/np205
Tilt, Tach, Towhooks
Original Truck AM/FM
Wellington, Ks
Ironhorse is offline   Reply With Quote
Old 08-25-2018, 06:40 PM   #10
Ironhorse
Senior Member
 
Ironhorse's Avatar
 
Join Date: Jul 2001
Location: Wellington, Ks
Posts: 10,284
Re: '57 2Dr Sedan

A few more pics.
Attached Images
   
__________________
1971 Chevy 1/2T 4x4 LWB 350 V-8
Was sm465-now 350TH/np205
Tilt, Tach, Towhooks
Original Truck AM/FM
Wellington, Ks
Ironhorse is offline   Reply With Quote
Old 08-25-2018, 08:40 PM   #11
Ol Blue K20
Proprietor of Dale's Corner
 
Ol Blue K20's Avatar
 
Join Date: Nov 2012
Location: Vacaville , CA
Posts: 16,237
Re: '57 2Dr Sedan

Nice!! Its gonna be fun to "putt" around in.....
__________________
"Some Days Chickens And Some Days Feathers"

Dale
XNGH ECV Sam Brannan 1004

R.I.P. 67ChevyRedneck
R.I.P. Grumpy Old Man
R.I.P. FleetsidePaul
Ol Blue K20 is online now   Reply With Quote
Old 08-25-2018, 10:38 PM   #12
flashed
Registered User
 
Join Date: Oct 2009
Location: canton ga
Posts: 12,728
Re: '57 2Dr Sedan

Im in to see this .
flashed is offline   Reply With Quote
Old 08-30-2018, 03:30 PM   #13
Ironhorse
Senior Member
 
Ironhorse's Avatar
 
Join Date: Jul 2001
Location: Wellington, Ks
Posts: 10,284
Re: '57 2Dr Sedan

Had to order a new gas tank and figured would get a new sending unit also. Ordered a Spectra tank which is made in Canada. According to most of the posts I read on a tri-five board I belong to, the Spectra tanks are the tank of choice for replacement of an original.

Think this will be a long process but I'm sure ready to hear that little mouse motor roar again. Nothing sounds as good as a sbc with open headers when building some Rs on the tach.
__________________
1971 Chevy 1/2T 4x4 LWB 350 V-8
Was sm465-now 350TH/np205
Tilt, Tach, Towhooks
Original Truck AM/FM
Wellington, Ks
Ironhorse is offline   Reply With Quote
Old 09-01-2018, 04:31 AM   #14
Nut Case
Registered User
 
Nut Case's Avatar
 
Join Date: Jul 2014
Location: Clear and Still Idaho
Posts: 509
Re: '57 2Dr Sedan

Not harpoons, just the house keeping, the square needle brigade.

I got two interns with electrodes in the big muscles on all fingers and thumbs, till I pulled all the needles out and ask for a real doctor.

I feel your pain.

Great car, brings back good memories. Strong work

Nut Case
__________________
Been there, wrecked that
Nut Case is online now   Reply With Quote
Old 09-01-2018, 10:08 AM   #15
Advanced Design
Senior Member
 
Advanced Design's Avatar
 
Join Date: Jul 2012
Location: Oblong, Illinois
Posts: 7,028
Re: '57 2Dr Sedan

Cool project, have fun! Tagging along for the rest.
Advanced Design is offline   Reply With Quote
Old 09-01-2018, 03:34 PM   #16
Russell Ashley
Registered User
 
Russell Ashley's Avatar
 
Join Date: May 2010
Location: Lawrenceville, Ga
Posts: 2,646
Re: '57 2Dr Sedan

Looks like it is solid and straight. That's going to be a sweet driver when you get it back going. Do you have all of the side trim?
Russell Ashley is offline   Reply With Quote
Old 09-05-2018, 09:57 PM   #17
Ironhorse
Senior Member
 
Ironhorse's Avatar
 
Join Date: Jul 2001
Location: Wellington, Ks
Posts: 10,284
Re: '57 2Dr Sedan

Actually it is VERY solid, also one of the reasons I decided not to beat it to death on the 1/4 mile track. Some bubbled rust on both front fenders, low, just in front of the doors and as can be seen the wrinkle on the driver's door mid way up aft. Ordered a new set of rubber body bushings and associated hardware. Figure what is there being 60 years old can't be as good as it was in 1957, LOL.

Also plan on taking the car to a body/frame shop before get any body/panel work done to have the frame "squared" prior to anything being done. Had that done with the truck and Chevelle both, no sense in not having it done here. Far as I know I have ALL the stainless side trim along with the front bumper and turn signal bar.

Got the new Spectra tank and sending unit yesterday and got it to my mechanic buddy. Going in the car within a couple days. Making some good progress, wish it was my hands doing the wrenching right now.

Seeing the specialist on my hand Monday. Hope the exam goes well. Still having some problems with grip and strength in it. NOT looking forward to surgery on it at all !
__________________
1971 Chevy 1/2T 4x4 LWB 350 V-8
Was sm465-now 350TH/np205
Tilt, Tach, Towhooks
Original Truck AM/FM
Wellington, Ks
Ironhorse is offline   Reply With Quote
Old 09-09-2018, 09:02 PM   #18
hooverfish
Senior Member
 
hooverfish's Avatar
 
Join Date: Oct 2012
Location: Lexington, Ky
Posts: 2,140
Re: '57 2Dr Sedan

Hello Gary, I'm subscribed and look forward to following your progress.
The 57 is nice, makes me want one. Larry
__________________
Larry
84 Chevy SWB, "Roy", dark blue orig paint, 6 cyl auto, PS, 88,000 miles.
72 Highlander LWB "Olive" med olive over lt yellow, air, 77,000 miles (sold)

"It's a sorry man who can't find his wife a good job"
hooverfish is offline   Reply With Quote
Old 09-09-2018, 09:10 PM   #19
Ol Blue K20
Proprietor of Dale's Corner
 
Ol Blue K20's Avatar
 
Join Date: Nov 2012
Location: Vacaville , CA
Posts: 16,237
Re: '57 2Dr Sedan

I've worked on a lot of tri fives but the 57 is my favorite by far!
__________________
"Some Days Chickens And Some Days Feathers"

Dale
XNGH ECV Sam Brannan 1004

R.I.P. 67ChevyRedneck
R.I.P. Grumpy Old Man
R.I.P. FleetsidePaul
Ol Blue K20 is online now   Reply With Quote
Old 09-09-2018, 10:57 PM   #20
Ironhorse
Senior Member
 
Ironhorse's Avatar
 
Join Date: Jul 2001
Location: Wellington, Ks
Posts: 10,284
Re: '57 2Dr Sedan

Visited the 57 and my mechanic buddy Saturday. He is making really good progress with new tank installed and up and running. Just had to take it for a short run down the street. Man, it was great to open up those twin 4 BBL carbs again and listen to the headers and Thrush mufflers growling. Just a quick 1st and 2nd gear run but sure made me feel great!

Just wish it was my hands working on it but for the time being that's not possible. Going to see the hand specialist tomorrow, hope he gives me some good news! Wish me luck on his exam.
__________________
1971 Chevy 1/2T 4x4 LWB 350 V-8
Was sm465-now 350TH/np205
Tilt, Tach, Towhooks
Original Truck AM/FM
Wellington, Ks
Ironhorse is offline   Reply With Quote
Old 09-10-2018, 01:41 AM   #21
Ol Blue K20
Proprietor of Dale's Corner
 
Ol Blue K20's Avatar
 
Join Date: Nov 2012
Location: Vacaville , CA
Posts: 16,237
Re: '57 2Dr Sedan

Quote:
Originally Posted by Ironhorse View Post
Visited the 57 and my mechanic buddy Saturday. He is making really good progress with new tank installed and up and running. Just had to take it for a short run down the street. Man, it was great to open up those twin 4 BBL carbs again and listen to the headers and Thrush mufflers growling. Just a quick 1st and 2nd gear run but sure made me feel great!

Just wish it was my hands working on it but for the time being that's not possible. Going to see the hand specialist tomorrow, hope he gives me some good news! Wish me luck on his exam.
Great that it's running!!! Best of luck on your exam buddy.....
__________________
"Some Days Chickens And Some Days Feathers"

Dale
XNGH ECV Sam Brannan 1004

R.I.P. 67ChevyRedneck
R.I.P. Grumpy Old Man
R.I.P. FleetsidePaul
Ol Blue K20 is online now   Reply With Quote
Old 09-10-2018, 08:57 AM   #22
mongocanfly
Post Whore

 
mongocanfly's Avatar
 
Join Date: May 2015
Location: Alabama
Posts: 14,662
Re: '57 2Dr Sedan

Man...I hope it all works out for you at the dr....
__________________
Mongo...aka Greg

RIP Dad
RIP Jesse

1981 C30 LQ9 NV4500..http://67-72chevytrucks.com/vboard/s...d.php?t=753598
Mongos AD- LS3 TR6060...http://67-72chevytrucks.com/vboard/s...34#post8522334
Columbus..the 1957 IH 4x4...http://67-72chevytrucks.com/vboard/s...63#post8082563
2023 Chevy Z71..daily driver
mongocanfly is offline   Reply With Quote
Old 09-10-2018, 09:03 PM   #23
flashed
Registered User
 
Join Date: Oct 2009
Location: canton ga
Posts: 12,728
Re: '57 2Dr Sedan

Hope your Dr visit goes well .
flashed is offline   Reply With Quote
Old 09-10-2018, 09:25 PM   #24
Ironhorse
Senior Member
 
Ironhorse's Avatar
 
Join Date: Jul 2001
Location: Wellington, Ks
Posts: 10,284
Re: '57 2Dr Sedan

Well the Dr. visit was kinda like the movie, The Good, The Bad and The Ugly. The Good is the pain has diminished and flexibility has returned quite a bit in the thumb joint and base of the thumb. The Bad is the thumb joint still locks up and pops and snaps when I flex the joint. The Ugly is the Dr. said when the steroid shot completely wears off and it's effects go away the pain will return just as much as before the shot was given. He said only a matter of time before I will be back to where I was. Could be month or several months but he was definite that it will return along with the stiffness.

Rats, looks like surgery for sure is some where in the future. Said the surgery is rather uncomplicated and quick with scraping bone and calcium build up within the joint. Said recovery is normally pretty quick being 3-4 weeks before have full use again of the thumb. My thoughts are now to put it off as long as I can when the pain returns and probably have the surgery during the winter months when stuck in the house and just throwing a log on the FP and drinking another cup of coffee is a big part of the day. Not what I wanted to hear but it is what it is. Tough on the old bod getting older but sure beats the alternative!
__________________
1971 Chevy 1/2T 4x4 LWB 350 V-8
Was sm465-now 350TH/np205
Tilt, Tach, Towhooks
Original Truck AM/FM
Wellington, Ks
Ironhorse is offline   Reply With Quote
Old 09-11-2018, 11:10 AM   #25
Clyde65
1965 Chevy C10, 2005 4.8L/4l60
 
Clyde65's Avatar
 
Join Date: Aug 2004
Location: DFW Texas
Posts: 8,545
Re: '57 2Dr Sedan

I had a similar issue several years ago....surgery helped but I still don’t have full range of motion or the grip I used to have.

I wish you good luck and second opinions. Just because!
__________________
Clyde65

Rebuild of Clyde
http://67-72chevytrucks.com/vboard/s...84#post8338184

69 Aristocrat Lo Liner build
http://67-72chevytrucks.com/vboard/s...84#post7561684



support our troops!
Clyde65 is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 06:51 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com