Where to get connectors - The 1947 - Present Chevrolet & GMC Truck Message Board Network

lamar · 01-08-2005, 12:19 AM

Does anybody know where I can get the male and female connectors that are used in the wiring harness?

Blue Beard · 01-08-2005, 12:22 AM

Get good buys on ebay if your not in a hurry...

incoma · 01-08-2005, 12:40 AM

I'd recommend buying a used harness, and pushing the old brass ends out and reusing the connectors. I bought a couple b/c mine were melted, and they cost about $7 each new. A used harness would be cheaper.

I've got extra brass crimps I'll sell you, or you can go to NAPA and buy some for yourself.

jmanz69 · 01-08-2005, 03:05 PM

Lamar,
What plugs are you looking for? I have a few harnesses here I will sell you cheap. Let me know and I will see if I have them. My harnesses are in pretty good shape and have good connectors on them.

lamar · 01-08-2005, 03:47 PM

Well I have a few harnesses myself but have a hard time getting the connectors opened up to put new wire in. The brass connector inside most of the black or brown plugs that are on the harness. I want new connectors to clean up and add a couple of thing to harness and still look factory.

suville · 01-08-2005, 03:57 PM

If you research some of the wiring harness suppliers: American Autowire, Painless ,Etc I believe they will have what you are looking for. There is a guy in Cali. I believe that is usually at the Monroe Swap meet that also can supply them at least has in the past I buy a lot of my wiring supplys from him, Freds Electrics or something like that maybe a search will bring it up. There are also special connector tools available to release the prongs on the brass connector in the plastic connectors,Snap-On, Mac, and Im sure you could get them at NAPA or any major tool source.

lamar · 01-08-2005, 05:44 PM

Thanks guys all good ideas, I knew someone here would know.

01-08-2005, 12:19 AM	#1
lamar Registered User Join Date: Apr 2004 Location: Covington,Ga Posts: 453	Where to get connectors Does anybody know where I can get the male and female connectors that are used in the wiring harness? __________________ 72 C-10

01-08-2005, 12:22 AM	#2
Blue Beard Registered User Join Date: Jan 2003 Location: Washington State Posts: 8,834	Get good buys on ebay if your not in a hurry... __________________ 1970 Chev CST 2003 Harley Fatboy 1975 Chevrolet Step Van 1956 Chev Bel Air 1977 Blazer 2WD For Sale $3000.00 1978 Blazer 2WD For Sale $7000.00 1978 Silverado 2005 Monte Carlo

01-08-2005, 03:47 PM	#5
lamar Registered User Join Date: Apr 2004 Location: Covington,Ga Posts: 453	Well I have a few harnesses myself but have a hard time getting the connectors opened up to put new wire in. The brass connector inside most of the black or brown plugs that are on the harness. I want new connectors to clean up and add a couple of thing to harness and still look factory. __________________ 72 C-10

01-08-2005, 05:44 PM	#7
lamar Registered User Join Date: Apr 2004 Location: Covington,Ga Posts: 453	Thanks guys all good ideas, I knew someone here would know. __________________ 72 C-10

01-08-2005, 12:40 AM	#3
incoma Registered User Join Date: Mar 2004 Location: Lexington, KY Posts: 865	I'd recommend buying a used harness, and pushing the old brass ends out and reusing the connectors. I bought a couple b/c mine were melted, and they cost about $7 each new. A used harness would be cheaper. I've got extra brass crimps I'll sell you, or you can go to NAPA and buy some for yourself.

01-08-2005, 03:05 PM	#4
jmanz69 Careful, they attack... Join Date: Aug 2001 Location: Waterford, MI, USA Posts: 1,107	Lamar, What plugs are you looking for? I have a few harnesses here I will sell you cheap. Let me know and I will see if I have them. My harnesses are in pretty good shape and have good connectors on them.

01-08-2005, 03:57 PM	#6
suville Registered User Join Date: Jun 2003 Location: Mtn. Home, Idaho Posts: 906	If you research some of the wiring harness suppliers: American Autowire, Painless ,Etc I believe they will have what you are looking for. There is a guy in Cali. I believe that is usually at the Monroe Swap meet that also can supply them at least has in the past I buy a lot of my wiring supplys from him, Freds Electrics or something like that maybe a search will bring it up. There are also special connector tools available to release the prongs on the brass connector in the plastic connectors,Snap-On, Mac, and Im sure you could get them at NAPA or any major tool source.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.