TN 250 6 engines and parts - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Grumpy old man** · 05-15-2017, 07:41 AM

I have a few extra 250's running and parts what do you need ?

start with intake/exhaust - $50.00 + shipping

good running 250 new gaskets , new exhaust manifold studs , ready to bolt in -- $450.00

**1968k20** · 05-15-2017, 05:47 PM

Passenger side motor mount clamshell for a 292 4x4

**Grumpy old man** · 05-15-2017, 06:23 PM

I have a few 292's let me check

**1968k20** · 05-15-2017, 09:14 PM

Thank you! Also maybe an air cleaner assembly, 292.

CST10 · 05-15-2017, 09:35 PM

A good 250 engine monojet carb? How much shipped to 70737

**Grumpy old man** · 05-17-2017, 08:01 AM

Quote:

Originally Posted by CST10

A good 250 engine monojet carb? How much shipped to 70737

I'll get some pictures for you this morning

CST10 · 05-17-2017, 04:58 PM

Quote:

Originally Posted by Grumpy old man

I'll get some pictures for you this morning

Thanks look forward to see em we you get them. Thanks again.

By the way good looking engine posted up there ha got. What part of east Texas you in. Might be worth my time to drive up there and get one.

old51sedan · 05-18-2017, 08:06 AM

Quote:

Originally Posted by CST10

Thanks look forward to see em we you get them. Thanks again.

By the way good looking engine posted up there ha got. What part of east Texas you in. Might be worth my time to drive up there and get one.

I believe he's in east Tennessee, not Texas..

rainamy · 05-19-2017, 07:45 PM

I'm looking for the air cleaner set up and associated metal pipes (for pcv, heat stove on manifold etc.) My engine is actually an integrated head '77, power brake truck so intake snorkle would've bent downwards in the factory piece...

Putting a new monojet on the truck and want to put the vacuum lines back right when I do it all, including the air cleaner/thermac unit.. (remove these golf tees too)

Any chance you might have anything?

**STP67-72** · 05-17-2017, 09:36 AM

Looking for a power steering setup for a 250 six banger. Let me know if you have one.

**Grumpy old man** · 05-17-2017, 10:41 AM

Quote:

Originally Posted by STP67-72

Looking for a power steering setup for a 250 six banger. Let me know if you have one.

If you find any I'll take all of them

, I'm looking for them myself

PICKMUP · 05-17-2017, 11:50 AM

Quote:

Originally Posted by Grumpy old man

If you find any I'll take all of them

, I'm looking for them myself

I have a couple like these: http://67-72chevytrucks.com/vboard/s...d.php?t=738088

**Grumpy old man** · 05-17-2017, 03:30 PM

Quote:

Originally Posted by PICKMUP

I have a couple like these: http://67-72chevytrucks.com/vboard/s...d.php?t=738088

Thanks for the offer but way out of my price range .

CST10 · 05-19-2017, 09:53 PM

Also with that monojet. I'm looking for the manual choke style, particularly a 68-69 model year stamping but can use any as long as manual choke set up.

Thanks.

**Grumpy old man** · 05-19-2017, 10:07 PM

Quote:

Originally Posted by CST10

Also with that monojet. I'm looking for the manual choke style, particularly a 68-69 model year stamping but can use any as long as manual choke set up.

Thanks.

I haven't forgotten your carb just busy as a one armed paper hanger !

Dirt's72 · 05-21-2017, 10:49 AM

I'm looking for 250 specific parts first being a negative sidepost battery cable and this clip that goes on the t-stat bolt which holds the hard fuel line.

**tkeduk8r** · 05-29-2017, 08:13 PM

Would you happen to have an oil pan for a 292 would you... 2wd is fine....
Mike

**FL71C10** · 06-03-2017, 04:16 PM

Do you still have an exhaust manifold? I have a 292 with a 4 speed.

Thanks.

**Grumpy old man** · 06-03-2017, 08:29 PM

Quote:

Originally Posted by tkeduk8r

Would you happen to have an oil pan for a 292 would you... 2wd is fine....
Mike

sorry no extra oil pans

**Grumpy old man** · 06-03-2017, 08:31 PM

Quote:

Originally Posted by Dirt's72

I'm looking for 250 specific parts first being a negative sidepost battery cable and this clip that goes on the t-stat bolt which holds the hard fuel line.

i have some of those clips , i just have to find them ...

CST10 · 06-10-2017, 10:17 PM

Grumpy. You ever find if you have a manual choke monojet available.

**Grumpy old man** · 06-10-2017, 11:16 PM

Quote:

Originally Posted by CST10

Grumpy. You ever find if you have a manual choke monojet available.

Yep ,

or rebuildable

**slepysal** · 07-12-2017, 05:10 PM

Looking for the manifold hold down clamps Ca 95112

dantotheman · 06-11-2017, 01:15 AM

Do you have any more of those exhaust manifolds? Any guess how much it would cost to ship to California?

**Grumpy old man** · 06-11-2017, 10:19 AM

Quote:

Originally Posted by dantotheman

Do you have any more of those exhaust manifolds? Any guess how much it would cost to ship to California?

I have a few I have to separate from the intakes , shipping would be high to CA

05-15-2017, 07:41 AM	#1
Grumpy old man Senior Member Join Date: Dec 2013 Location: Gods country East,Tn Posts: 8,545	250 6 engines and parts I have a few extra 250's running and parts what do you need ? start with intake/exhaust - $50.00 + shipping good running 250 new gaskets , new exhaust manifold studs , ready to bolt in -- $450.00 Last edited by Grumpy old man; 05-17-2017 at 07:59 AM.

05-15-2017, 05:47 PM	#2
1968k20 Senior Member Join Date: Dec 2009 Location: Chester,California Posts: 5,629	Re: 250 6 engines and parts Passenger side motor mount clamshell for a 292 4x4 __________________ 1977 Chevrolet K10 SWB Project 350/4spd/np205 1977 Chevrolet K20 LWB 350/350/203 1991 4Runner 22RE 5 SPD Yanmar Tractor 3 Cyl Diesel

05-15-2017, 06:23 PM	#3
Grumpy old man Senior Member Join Date: Dec 2013 Location: Gods country East,Tn Posts: 8,545	Re: 250 6 engines and parts I have a few 292's let me check

05-15-2017, 09:14 PM	#4
1968k20 Senior Member Join Date: Dec 2009 Location: Chester,California Posts: 5,629	Re: 250 6 engines and parts Thank you! Also maybe an air cleaner assembly, 292. __________________ 1977 Chevrolet K10 SWB Project 350/4spd/np205 1977 Chevrolet K20 LWB 350/350/203 1991 4Runner 22RE 5 SPD Yanmar Tractor 3 Cyl Diesel

05-15-2017, 09:35 PM	#5
CST10 Registered User Join Date: Sep 2013 Location: Gonzales, La Posts: 1,441	Re: 250 6 engines and parts A good 250 engine monojet carb? How much shipped to 70737 __________________ MyToys: Goldilocks the "Ol School Survivor" 1968 C10, SWB Stepside, 08/15 TOTM, 250 CI 6 cylinder, 3 on the tree, 3.73 rear, 3/5 static drop, 23,500 original miles. Samson the 1970 CST10, LWB, 462Ci, Turbo 350 tranny, 3.08 rear gear, PB, PS, A/C, AM/FM, 2/4 Drop. Brutus the 1998 Camaro Z28, 33,500 original miles, LS1, 519 RWHP/497 RWTQ. Member of the Louisiana Classic Truck Club, LCTC Member of the Louisiana C10 Club Member of the Baton Rouge Drifters Car Club

05-19-2017, 07:45 PM	#9
rainamy Registered User Join Date: Jul 2014 Location: Rockdale Co. GA Posts: 165	Re: 250 6 engines and parts I'm looking for the air cleaner set up and associated metal pipes (for pcv, heat stove on manifold etc.) My engine is actually an integrated head '77, power brake truck so intake snorkle would've bent downwards in the factory piece... Putting a new monojet on the truck and want to put the vacuum lines back right when I do it all, including the air cleaner/thermac unit.. (remove these golf tees too) Any chance you might have anything?

05-17-2017, 09:36 AM	#10
STP67-72 Senior Member Join Date: Jan 2002 Location: PORT NECHES, TEXAS / USA Posts: 1,667	Re: 250 6 engines and parts Looking for a power steering setup for a 250 six banger. Let me know if you have one. __________________ 55 Chevy original swb (big back window) 61 Chevy bubble top (427-5 speed) 67 Chevy stepside (Krusty) 68 Chevy swb fleet (Lola) 68 Chevy swb fleet 71 Chevy swb fleet ( future PB project) 97 crew cab power stroke 07 SS Trail blazer

05-19-2017, 09:53 PM	#14
CST10 Registered User Join Date: Sep 2013 Location: Gonzales, La Posts: 1,441	Re: 250 6 engines and parts Also with that monojet. I'm looking for the manual choke style, particularly a 68-69 model year stamping but can use any as long as manual choke set up. Thanks. __________________ MyToys: Goldilocks the "Ol School Survivor" 1968 C10, SWB Stepside, 08/15 TOTM, 250 CI 6 cylinder, 3 on the tree, 3.73 rear, 3/5 static drop, 23,500 original miles. Samson the 1970 CST10, LWB, 462Ci, Turbo 350 tranny, 3.08 rear gear, PB, PS, A/C, AM/FM, 2/4 Drop. Brutus the 1998 Camaro Z28, 33,500 original miles, LS1, 519 RWHP/497 RWTQ. Member of the Louisiana Classic Truck Club, LCTC Member of the Louisiana C10 Club Member of the Baton Rouge Drifters Car Club

05-21-2017, 10:49 AM	#16
Dirt's72 Registered User Join Date: May 2013 Location: Albuquerque, NM Posts: 1,106	Re: 250 6 engines and parts I'm looking for 250 specific parts first being a negative sidepost battery cable and this clip that goes on the t-stat bolt which holds the hard fuel line.

05-29-2017, 08:13 PM	#17
tkeduk8r Senior Member Join Date: Apr 2001 Location: Alexandria, MN Posts: 1,462	Re: 250 6 engines and parts Would you happen to have an oil pan for a 292 would you... 2wd is fine.... Mike __________________ 63 C20 2WD, 230/SM420/4.11 73K 68 C30 dump truck, 327,SM425,4.56 66K original 68 C10 2WD SWB Stepper, 250/3-tree/3.73 66K.... Wifes 68 Buick Skylark Custom Conv., 350/TH400/2.56 In our family since '79 69 GMC 1500 SWB 2WD, 350/TH350/3.73 posi... 70 K10 SWB 4X4 4-sp,ps, pb, tilt, buckets, console, sliding back window (Need AC parts) WIP 72 Chevy K20 4x4 350/350/205/4.56 donor 72 Vette 350/M21/3.70 posi, triple black and super fast 84 Olds Cutlass Brougham 350/2004r/4.11 was Dad's

06-03-2017, 04:16 PM	#18
FL71C10 Senior Member Join Date: Jun 2010 Location: Orlando, Florida Posts: 2,508	Re: 250 6 engines and parts Do you still have an exhaust manifold? I have a 292 with a 4 speed. Thanks. __________________ 71 Chevy C10 Shortbed Stepside. LT1 with 4l60E. Just got back from painter, in assembly now.

06-10-2017, 10:17 PM	#21
CST10 Registered User Join Date: Sep 2013 Location: Gonzales, La Posts: 1,441	Re: 250 6 engines and parts Grumpy. You ever find if you have a manual choke monojet available. __________________ MyToys: Goldilocks the "Ol School Survivor" 1968 C10, SWB Stepside, 08/15 TOTM, 250 CI 6 cylinder, 3 on the tree, 3.73 rear, 3/5 static drop, 23,500 original miles. Samson the 1970 CST10, LWB, 462Ci, Turbo 350 tranny, 3.08 rear gear, PB, PS, A/C, AM/FM, 2/4 Drop. Brutus the 1998 Camaro Z28, 33,500 original miles, LS1, 519 RWHP/497 RWTQ. Member of the Louisiana Classic Truck Club, LCTC Member of the Louisiana C10 Club Member of the Baton Rouge Drifters Car Club

07-12-2017, 05:10 PM	#23
slepysal Registered User Join Date: Oct 2006 Location: San Jose NOR*CAL Posts: 3,080	Re: 250 6 engines and parts Looking for the manifold hold down clamps Ca 95112 __________________ 1960 Apache long bed fleet L6 250 Clifford intake 2 bbl carb. Langdon cast headers with dual exhaust and bellflower tips. T-5 5 speed, power steering and power disc brakes. "Over, Around or through it... "

06-11-2017, 01:15 AM	#24
dantotheman Registered User Join Date: May 2017 Location: Pismo Beach, CA Posts: 3	Re: 250 6 engines and parts Do you have any more of those exhaust manifolds? Any guess how much it would cost to ship to California?



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.