wiper arm removal? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

60ratrod · 04-21-2011, 03:31 AM

so i tried getting the wiper arms to come off so i can remove the cowl panel and they didn't budge, so i stopped before fudging something up. can anyone tell me how these blasted things are supposed to come off?

Jeffs70 · 04-21-2011, 05:23 AM

lift your wiper up where it flex's and attaches to the truck. there is a little lever under the round area that you may need to push up with a small screw driver while you pull it towards you and away from the truck... they can be a pain thats for sure.

JimKshortstep4x4 · 04-21-2011, 07:18 AM

The easiest way is to use the tool made for removing wiper arms. The tool is available at most parts stores and is not that expensive. The little tin clip that is under the arm will not stop the removal so you don't have to address it.

I can post a pic if you have trouble finding the tool.

Jim

mrein3 · 04-21-2011, 07:26 AM

Quote:

Originally Posted by 60ratrod

so i tried getting the wiper arms to come off so i can remove the cowl panel and they didn't budge, so i stopped before fudging something up. can anyone tell me how these blasted things are supposed to come off?

Here is how you remove wiper arms on our trucks.

1. Get on the Google and type in "Snap-on A192".
2. The first hit is a Snap-on web page where you can order Snap-on tool number A192.
3. Click "Add To Cart".
4. Click "Checkout".
5. Wait for A192 in the mail.
6. Remove wiper arm the proper way with the proper tool and never scratch up your cowl again.

Same tool works on 1971 and 1972 Chevelle wiper arms too.

This tool belongs in EVERYBODY'S tool box next to the window crank/inside door handle five dollar horse shoe clip remover tool.

Kinda like a distributor wrench. Yes there are other ways to get by but until you have the correct tool you don't know how easy it can be.

Sinister · 04-21-2011, 12:28 PM

Quote:

Originally Posted by mrein3

Here is how you remove wiper arms on our trucks.

1. Get on the Google and type in "Snap-on A192".
2. The first hit is a Snap-on web page where you can order Snap-on tool number A192.
3. Click "Add To Cart".
4. Click "Checkout".
5. Wait for A192 in the mail.
6. Remove wiper arm the proper way with the proper tool and never scratch up your cowl again.

Same tool works on 1971 and 1972 Chevelle wiper arms too.

This tool belongs in EVERYBODY'S tool box next to the window crank/inside door handle five dollar horse shoe clip remover tool.

Kinda like a distributor wrench. Yes there are other ways to get by but until you have the correct tool you don't know how easy it can be.

This tool works great and is only about $10.

mike16 · 09-13-2015, 01:40 AM

Quote:

Originally Posted by Sinister

This tool works great and is only about $10.

a Strap-On tool for 10 bucks? the catolog must date from the late 60's early 70's too.

tdangle · 09-14-2015, 03:42 PM

Great info! Just ordered one. $12.05 + Tax free shipping.

mtairymd · 05-01-2016, 09:58 AM

Will this version work as well as the Snap-on?

Amazon.com: Lisle 65750 Windshield Tool:...

hayhauler71 · 04-21-2011, 09:29 PM

Quote:

Originally Posted by mrein3

Here is how you remove wiper arms on our trucks.

1. Get on the Google and type in "Snap-on A192".
2. The first hit is a Snap-on web page where you can order Snap-on tool number A192.
3. Click "Add To Cart".
4. Click "Checkout".
5. Wait for A192 in the mail.
6. Remove wiper arm the proper way with the proper tool and never scratch up your cowl again.

Same tool works on 1971 and 1972 Chevelle wiper arms too.

This tool belongs in EVERYBODY'S tool box next to the window crank/inside door handle five dollar horse shoe clip remover tool.

Kinda like a distributor wrench. Yes there are other ways to get by but until you have the correct tool you don't know how easy it can be.

I have this tool and it looks so simple but works like a dream.

gonzo6869 · 04-21-2011, 09:34 PM

You can get said tool, or you can remove that tab with a small screw driver by pulling down on it. You don't need the tab to keep the wiper arms on. With the tabs removed you can then devote your anger towards removing the wipers, have fun, they can be a pain in the ***

Jeffs70 · 04-21-2011, 10:27 PM

Quote:

Originally Posted by gonzo6869

You can get said tool, or you can remove that tab with a small screw driver by pulling down on it. You don't need the tab to keep the wiper arms on. With the tabs removed you can then devote your anger towards removing the wipers, have fun, they can be a pain in the ***

exactly my thoughts on this. why spend money where you can just go and bend an old screw driver to do exactly the same thing.. either way they are a pain to get off..elbow grease will need to be used IMO

1972RedNeck · 12-08-2011, 08:39 PM

Quote:

Originally Posted by mrein3

This tool belongs in EVERYBODY'S tool box next to the window crank/inside door handle five dollar horse shoe clip remover tool.

An old rag works great for the crank/door handle. I think I learned that from one of fastwillie 696969's posts.

57taskforce · 03-29-2015, 08:48 PM

Quote:

Originally Posted by mrein3

Here is how you remove wiper arms on our trucks.

1. Get on the Google and type in "Snap-on A192".
2. The first hit is a Snap-on web page where you can order Snap-on tool number A192.
3. Click "Add To Cart".
4. Click "Checkout".
5. Wait for A192 in the mail.
6. Remove wiper arm the proper way with the proper tool and never scratch up your cowl again.

Same tool works on 1971 and 1972 Chevelle wiper arms too.

This tool belongs in EVERYBODY'S tool box next to the window crank/inside door handle five dollar horse shoe clip remover tool.

Kinda like a distributor wrench. Yes there are other ways to get by but until you have the correct tool you don't know how easy it can be.

The door spring compressor tool for the later style hinges belongs in this list as well!

That said thanks for the info on the snap on tool. I've fought these stupid things a few times and even come close to the cut off wheel myself!

**71CHEVYSHORTBED402** · 03-30-2015, 12:20 AM

Quote:

Originally Posted by 57taskforce

The door spring compressor tool for the later style hinges belongs in this list as well!

That said thanks for the info on the snap on tool. I've fought these stupid things a few times and even come close to the cut off wheel myself!

Whats the door compressor tool do. Work for a 71?

1968CHEVYC10 · 04-21-2011, 04:41 PM

I just used the claws on a hammer, worked good, but then I'm not worried about scratching paint.

71gmcburb · 04-21-2011, 09:55 PM

I used a set of channel locks to GENTLY remove my arms after poping the release under the arm

Ackattack · 04-21-2011, 10:04 PM

In 15 years of owning these truck I've never used a special tool. The thought of a special tool never even crossed my mind and I've fought with many wipers. Damnit...why didn't I think of googling it?!?

bollybib · 04-21-2011, 10:29 PM

I bought this thing many years ago (1988 or so). I recently found it still wrapped in its original sealed bag with some stuff I had stored. It took me a couple of tries, but once I figured it out, piece of cake. Better than anything else I ever used to get the bloody (#^!%@*@&^) arms off. I just looked at LICS http://www.parts123.com/parts123/yb.dll?parta~partsort it is still six bucks.

**DANTIP** · 12-08-2011, 08:21 AM

I ordered this Snap-On wiper removal tool ($10) and the first time I used it I realized how ridiculous it is to use a screw driver and pry against the cowl. This should be in the FAQ.

Bert W · 12-08-2011, 10:34 AM

Today I'll order a Snap On wiper removal tool. After pulling one tab out completely during a raging fit, mine still did not come off. The 4.5 inch cut off wheel easily removed the wiper arms. I'll have to pay for my fit when I buy new wiper arms. Thanks for the tip!

tubbedII · 12-08-2011, 01:36 PM

Quote:

Originally Posted by Bert W

The 4.5 inch cut off wheel easily removed the wiper arms.

**71CHEVYSHORTBED402** · 03-29-2015, 07:40 PM

I just ordered the part. No clip? Sounds like the tension in the arm keeps it attached.

**71CHEVYSHORTBED402** · 03-29-2015, 07:47 PM

Quote:

Originally Posted by 71CHEVYSHORTBED402

I just ordered the part. No clip? Sounds like the tension in the arm keeps it attached.

Found this video that answered my question. Works for truck as well. This is just a different tool.

https://www.youtube.com/watch?featur...KvbtxGiI_w#t=0

57taskforce · 03-30-2015, 09:00 AM

No the later hinges (73+) have a spring that stops the door in the different positions. In order to swap the pins and bushings the spring has to come out and it can be a real pita.

68Rustybucket · 09-12-2015, 07:22 PM

I took mine off with a bottom keeper to a u bolt for exhaust lol believe it or not it worked.

04-21-2011, 03:31 AM	#1
60ratrod yes, i do Join Date: Jun 2007 Location: Spokane, wa Posts: 2,734	wiper arm removal? so i tried getting the wiper arms to come off so i can remove the cowl panel and they didn't budge, so i stopped before fudging something up. can anyone tell me how these blasted things are supposed to come off? __________________ ERROR 404....... SNAPPY COMEBACK NOT FOUND _______________________________________________________________________________________________ -60 Chevy C10, dead 350/good th350 combo, sitting on a 76 c10 blazer frame, built from 11 different vehicles "the abomination" -07 gmt900 silverado 1500 lt xcab z71, granite blue -81 suzuki gs650g "shelah"- current project -81 kz1000m1 csr "sarge" -next project (just beautification) -07 kawasaki vulcan classic vn900

04-21-2011, 05:23 AM	#2
Jeffs70 Registered User Join Date: Oct 2007 Location: Valley Springs, Ca Posts: 857	Re: wiper arm removal? lift your wiper up where it flex's and attaches to the truck. there is a little lever under the round area that you may need to push up with a small screw driver while you pull it towards you and away from the truck... they can be a pain thats for sure. __________________ My Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=442487 My Picture Gallery http://67-72chevytrucks.com/gallery/...0&ppuser=36004

04-21-2011, 07:18 AM	#3
JimKshortstep4x4 Senior Member Join Date: Jul 2001 Location: Muskegon,MI,USA Posts: 6,026	Re: wiper arm removal? The easiest way is to use the tool made for removing wiper arms. The tool is available at most parts stores and is not that expensive. The little tin clip that is under the arm will not stop the removal so you don't have to address it. I can post a pic if you have trouble finding the tool. Jim __________________ 1971 Shortbox step side 4x4, 350 sbc, 3:07 rear end 1965 Impala SS 400 sbc, Muncie rock crusher 1966 Impala SS 396 bbc, TH 400 1969 El Camino, 350 sbc, TH 350 1971 Snowplow built on a Blazer frame 1972 GMC Short bed, stepside, TH 400, 427 BBC

09-14-2015, 03:42 PM	#7
tdangle Registered User Join Date: Mar 2005 Location: Jurupa Valley, Ca Posts: 1,210	Re: wiper arm removal? Great info! Just ordered one. $12.05 + Tax free shipping. __________________ Terry 1970 Custom Camper/C20 , GM Crate 350/7004R, Dana 60, factory AC

05-01-2016, 09:58 AM	#8
mtairymd Registered User Join Date: Apr 2016 Location: Mount Airy, Maryland Posts: 10	Re: wiper arm removal? Will this version work as well as the Snap-on? Amazon.com: Lisle 65750 Windshield Tool:...

04-21-2011, 09:34 PM	#10
gonzo6869 Cops, ha, catch me if you can! Join Date: Jun 2009 Location: Santa Barbara, CA. Posts: 271	Re: wiper arm removal? You can get said tool, or you can remove that tab with a small screw driver by pulling down on it. You don't need the tab to keep the wiper arms on. With the tabs removed you can then devote your anger towards removing the wipers, have fun, they can be a pain in the *** __________________ 72 C-10 Stepper 350/TH350 3.73 in the back Edelbrock intake and Carb Hooker Comp Headers 275/60R15 on Rallies

04-21-2011, 04:41 PM	#15
1968CHEVYC10 Registered User Join Date: Aug 2009 Location: Tomball, TX Posts: 578	Re: wiper arm removal? I just used the claws on a hammer, worked good, but then I'm not worried about scratching paint. __________________ '68 C10 LWB 6.2NA/NP833 3.73's

04-21-2011, 09:55 PM	#16
71gmcburb Registered User Join Date: Oct 2010 Location: everett washington Posts: 382	Re: wiper arm removal? I used a set of channel locks to GENTLY remove my arms after poping the release under the arm __________________ a wise man once said "There are only two real rules to life... 1 - Don't sweat the small stuff 2 - Everything is small stuff

04-21-2011, 10:04 PM	#17
Ackattack Senior Member Join Date: Aug 2002 Location: Valley Center KS Posts: 3,525	Re: wiper arm removal? In 15 years of owning these truck I've never used a special tool. The thought of a special tool never even crossed my mind and I've fought with many wipers. Damnit...why didn't I think of googling it?!? __________________ Project Bruiser: 68 Pro-Touring C-10 5.3L / 4L60E Project Ironhide: 97 GMC Crew Cab 4x4 Cummins SOLD: '69 GMC 1/2T SWB TBI'd: Project No Buck Assembly Manual Index Sign up Thread!!! Factory Service Manual Index

04-21-2011, 10:29 PM	#18
bollybib Registered User Join Date: Nov 2010 Location: Carlsbad, CA Posts: 1,584	Re: wiper arm removal? I bought this thing many years ago (1988 or so). I recently found it still wrapped in its original sealed bag with some stuff I had stored. It took me a couple of tries, but once I figured it out, piece of cake. Better than anything else I ever used to get the bloody (#^!%@@&^) arms off. I just looked at LICS http://www.parts123.com/parts123/yb.dll?parta~partsort it is still six bucks. Attached Images __________________ - Jim -* My Daily Driver is a 1969 Chevrolet Custom/20 Fleetside 350/TH400/Eaton H052 4.10 and its Project thread is here http://67-72chevytrucks.com/vboard/s...d.php?t=456911 Last edited by bollybib; 04-21-2011 at 10:34 PM. Reason: more info and booboos

12-08-2011, 08:21 AM	#19
DANTIP Registered User Join Date: Sep 2001 Location: Fort Wayne, Indiana, USA Posts: 1,882	Re: wiper arm removal? I ordered this Snap-On wiper removal tool ($10) and the first time I used it I realized how ridiculous it is to use a screw driver and pry against the cowl. This should be in the FAQ. Attached Images

12-08-2011, 10:34 AM	#20
Bert W Registered User Join Date: Dec 2008 Location: Jackson, MS Posts: 373	Re: wiper arm removal? Today I'll order a Snap On wiper removal tool. After pulling one tab out completely during a raging fit, mine still did not come off. The 4.5 inch cut off wheel easily removed the wiper arms. I'll have to pay for my fit when I buy new wiper arms. Thanks for the tip! __________________ 1968 Chevy C/10 LWB V8 1983 K5 Blazer 1989 C1500 Stepside Reg. Cab V8

03-29-2015, 07:40 PM	#22
71CHEVYSHORTBED402 Senior Member Join Date: Feb 2009 Location: Northern Nevada Posts: 7,200	Re: wiper arm removal? I just ordered the part. No clip? Sounds like the tension in the arm keeps it attached. __________________ Tony 71 Custom Deluxe, SWB, 2WD, 402, A/C. I developed an assembly kit for restoring the (a) truck from the ground up. My build thread, and more on the assembly kit https://67-72chevytrucks.com/vboard/...d.php?t=730025

03-30-2015, 09:00 AM	#24
57taskforce All about them K’s Join Date: Jun 2014 Location: Farmington, New Mexico Posts: 6,328	Re: wiper arm removal? No the later hinges (73+) have a spring that stops the door in the different positions. In order to swap the pins and bushings the spring has to come out and it can be a real pita. __________________ Tyler '57 3100 http://67-72chevytrucks.com/vboard/s...d.php?t=813888 '72 K20 Cheyenne http://67-72chevytrucks.com/vboard/s...d.php?t=662879 ‘69 K10 SWB http://67-72chevytrucks.com/vboard/s...d.php?t=805206 '98 Silverado LT K2500HD ECLB Vortec 454/4l80E: 6" lift 315/75/16's ‘87 IROC-Z all original 50K mile survivor TPI 305 IROC Blue ‘10 Camaro 2SS/RS Aqua Blue Metallic #93 -version 2.0

09-12-2015, 07:22 PM	#25
68Rustybucket Registered User Join Date: Sep 2015 Location: tullahoma tn Posts: 1	Re: wiper arm removal? I took mine off with a bottom keeper to a u bolt for exhaust lol believe it or not it worked.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.