58 GMC Project - The 1947 - Present Chevrolet & GMC Truck Message Board Network

CAL 58 GMC · 07-04-2005, 05:16 PM

I have just started my 58 GMC project. I bought the truck a few years back for $800. It has a 79 camaro subframe, 55 chevy clip and the 58 GMC cab. I have almost all of my parts now for the project. Here's a list of some of the highlights.

CHEVY 350/330hp.(ALL POLISHED & CHROMED)
TCI STREETFIGHTER TURBO 350 TRANS.
DAYNO FLOW CERAMIC HEADERS.
2003 CHEVY BLAZER POSI REAR DIF.
FOUR WHEEL DISC BRAKES.
FRAME MOUNT TCI POWER BRAKE UNIT.
TOURQE THUSTER II RIMS.
18X8 & 20X10 ON NITTO 225/35-18 & 275/30-20.
FLAMING RIVER POLISHED STIANLESS TILT COLUMN & BILLIT WHEEL.
POWER LEATHER BUCKET SEATS OUT OF A 97 HONDA.
COMPLETE 18 CIRCUT WIRING.
SHAVED DOORS.
ALL NEW GLASS & RUBBER.
BROTHER'S ONE PIECE WINDOW KIT.
POWER WINDOWS.
SHAVED GAS FILLER & KUSTOM TANK'S UNDER BED FUEL CELL.
NEW CHROME BUMBER & GRILL.
NEW FENDERS, SMOOTH TAILGATE, FRONT PANEL, CROSS SILLS, ROLL PAN, BED SIDES & STEP PLATES.
AIR RIDE SHOCKWAVE BAGS.
REAR FIRESTONE AIR BAGS.
OLD AIR, AIR AND HEAT UNIT.
OAK WOOD WITH POLISHED STAINLESS STRAPS.
RODDOORS CUSTOM HEADLINER, DOOR PANELS, KICK PANELS & CAB BACK.
PAINT: PPG PLYMONTH PROWLER ORANGE PEARL.
79 Z-28 CAMARO SUB-FRAME.
55 CHEVY FRONT CLIP (hood, fenders, grill, lights and bumper).

I will be sending the frame in for powder coating in the next few weeks. As the project gose on I will post new pixs & update.

speedking · 07-08-2005, 02:38 AM

That's gonna be sweeeeet when you get it done!

CAL 58 GMC · 07-09-2005, 01:05 AM

I just got my create motor in! I will post some pixs soon.

CAL 58 GMC · 07-12-2005, 06:12 PM

Here's the pixs of the create motor I bought.

DLRichards85 · 07-13-2005, 11:28 AM

Verry Nice, I can't wait to see the end result of 1000's of hours of work. Should look Awesome!!! Good Luck "Gentelmen start your Creditcards!"

LOL it is addictive.

CAL 58 GMC · 07-15-2005, 06:36 AM

Yes it is addictive!! The strang thing is, once your projects done, you want to sell it and start a new one.....Yes it's addictive...LOL!

Thanks DLRichard85 for checking it out.

jessejamez · 03-08-2010, 01:11 AM

Quote:

Originally Posted by CAL 58 GMC

Yes it is addictive!! The strang thing is, once your projects done, you want to sell it and start a new one.....Yes it's addictive...LOL!

Thanks DLRichard85 for checking it out.

hello cal58 if your planning on selling this one or know of where i can get one just like this?

CAL 58 GMC · 03-09-2010, 07:08 PM

Quote:

Originally Posted by jessejamez

hello cal58 if your planning on selling this one or know of where i can get one just like this?

I have no plans on selling my truck. As to were you can find one just like it? Well I don't think you will find one just like it since it's a custom build.

jessejamez · 03-10-2010, 01:24 AM

Quote:

Originally Posted by CAL 58 GMC

I have no plans on selling my truck. As to were you can find one just like it? Well I don't think you will find one just like it since it's a custom build.

thanks cal for response, well im sure i wouldnt find just like yours but if you know of any 55-56 maybe 57 for sale i am def very serious about fixing one up and might be taking a trip to arkansas this weekend to look at one im in az.. but im willing to put the time and energy into making my own. I have wanted one like this since i was a kid but never had the opportunity and now i have that opportunity, thanks again.

**N2TRUX** · 08-17-2005, 11:20 PM

Quote:

Originally Posted by CAL 58 GMC

I think I figured out how to get my photos to post. Heres a try.

If you want to show larger pics just right click on them in your photo album and save them to your hard drive. They are resized small enough that you can upload them from there....

CAL 58 GMC · 08-20-2005, 05:08 PM

Thanks N2TRUX! I will give it a try. By the way, I like your truck! I had a 79 and keep the moldings on like you have....I love the look!

CAL 58 GMC · 08-20-2005, 05:40 PM

Okay, I am going to try and upload a larger photo. I just put my rear diff. in. It came out of a 2003 S-10 Blazer with disc brakes. I don't have my 20's on in the photo. I need to get a set of adapters for spacing and due to the fact when I ordered the wheels I ordered the wrong bolt pattern. I ordered 5x4.25 and it should have been 5x4.75. Summit Racing will not take back wheels if you have mounted the tires.

thebeemanone · 07-16-2005, 07:42 PM

Hey

That looks great but it looks to be a 57 or earler 58 and 59 had the 4 head light system.

CAL 58 GMC · 07-16-2005, 09:11 PM

Thanks! It's a 58 GMC cab with a 55 clip.

CAL 58 GMC · 07-25-2005, 12:51 AM

I just got my Tilt column & billit wheel. The column is 30 inch DD Flamming River. The wheel I got off of an e-bay auction. I have a Lokar shifter for the floor. Here is a picture.

CAL 58 GMC · 08-14-2005, 08:31 PM

I just got done putting together the instrumet panel. Since the GMC has a different gauge cluster (which I don't like)

then the Chevy, I wanted to have something more custom. The bezel is from Billit Specialties for a 32 Ford. The gauges are Auto Meter. I am filling in the stock dash openning with this cluster

**N2TRUX** · 08-17-2005, 11:18 PM

Looks like it's going to be a nice one....

DennyB · 09-01-2005, 02:44 PM

Great progress!

CAL 58 GMC · 09-09-2005, 07:07 AM

Thanks Denny B. I hope to have more pixs soon.

extd56 · 09-09-2005, 09:35 AM

If you are looking for a custom stepside bed let me know, I am selling one that I did not use for my extended project.

OrangeMach · 09-09-2005, 12:08 PM

Looks real good. I hope I can the the old 59 to that stage one day. Where did you get the 55 front end?

Steve Kelly · 11-26-2007, 12:50 PM

Quote:

Originally Posted by extd56

If you are looking for a custom stepside bed let me know, I am selling one that I did not use for my extended project.

what is the extended cab on the other truck you have,and what did you use a sub or two truck cabs.

CAL 58 GMC · 11-26-2007, 05:16 PM

Quote:

Originally Posted by Steve Kelly

what is the extended cab on the other truck you have,and what did you use a sub or two truck cabs.

Hey Steve, You need to PM extd56 to find out. I don't think he reads my thread. By the way, Welcome!!

CAL 58 GMC · 09-09-2005, 06:34 PM

Thanks OrangeMach, The clip came with the truck when I bought it.

extd56, A few months back I could have used that bed, but since then I bought new fenders, steps, back panel, tail gate, cross braces & roll pan.

CAL 58 GMC · 09-16-2005, 09:46 PM

I just got the cab off the frame. The cab is headed to the body shop and the frame will soon be going in for powder coating.

I used my engine hoist to pick the cab off the frame by making a cradle and bolting it to the top of the hoist. Then I pushed the hoist and the cradle into the door openings and picked it up at the top of the door jams. It worked out really well.

I also put the fiberglass firewall panel on to fill the holes and smooth it all out. I got the firewall panel from Brothers.

07-04-2005, 05:16 PM	#1
CAL 58 GMC Senior Member Join Date: Jun 2005 Location: Clovis Ca. Posts: 3,311	58 GMC Project I have just started my 58 GMC project. I bought the truck a few years back for $800. It has a 79 camaro subframe, 55 chevy clip and the 58 GMC cab. I have almost all of my parts now for the project. Here's a list of some of the highlights. CHEVY 350/330hp.(ALL POLISHED & CHROMED) TCI STREETFIGHTER TURBO 350 TRANS. DAYNO FLOW CERAMIC HEADERS. 2003 CHEVY BLAZER POSI REAR DIF. FOUR WHEEL DISC BRAKES. FRAME MOUNT TCI POWER BRAKE UNIT. TOURQE THUSTER II RIMS. 18X8 & 20X10 ON NITTO 225/35-18 & 275/30-20. FLAMING RIVER POLISHED STIANLESS TILT COLUMN & BILLIT WHEEL. POWER LEATHER BUCKET SEATS OUT OF A 97 HONDA. COMPLETE 18 CIRCUT WIRING. SHAVED DOORS. ALL NEW GLASS & RUBBER. BROTHER'S ONE PIECE WINDOW KIT. POWER WINDOWS. SHAVED GAS FILLER & KUSTOM TANK'S UNDER BED FUEL CELL. NEW CHROME BUMBER & GRILL. NEW FENDERS, SMOOTH TAILGATE, FRONT PANEL, CROSS SILLS, ROLL PAN, BED SIDES & STEP PLATES. AIR RIDE SHOCKWAVE BAGS. REAR FIRESTONE AIR BAGS. OLD AIR, AIR AND HEAT UNIT. OAK WOOD WITH POLISHED STAINLESS STRAPS. RODDOORS CUSTOM HEADLINER, DOOR PANELS, KICK PANELS & CAB BACK. PAINT: PPG PLYMONTH PROWLER ORANGE PEARL. 79 Z-28 CAMARO SUB-FRAME. 55 CHEVY FRONT CLIP (hood, fenders, grill, lights and bumper). I will be sending the frame in for powder coating in the next few weeks. As the project gose on I will post new pixs & update. Attached Images Last edited by CAL 58 GMC; 07-15-2007 at 10:16 PM.

07-08-2005, 02:38 AM	#2
speedking Registered User Join Date: Apr 2005 Location: Elko,Nevada,USA,Earth Posts: 78	That's gonna be sweeeeet when you get it done! __________________ -57 GMC 1/2 ton longbed,Pont. 400,4 speed -62 Chevy 1 ton duallie,Chevy 355,4 speed -66 Pontiac Catalina 2 dr. hardtop,389,T-400 -81 Ford Fairmont wgn.,2.3,4 speed -68 Triumph TR6-R 'cycle,various mods -66 C-60's back -there's probably others...

07-12-2005, 06:12 PM	#4
CAL 58 GMC Senior Member Join Date: Jun 2005 Location: Clovis Ca. Posts: 3,311	Here's the pixs of the create motor I bought. Attached Images Last edited by CAL 58 GMC; 09-13-2005 at 03:59 PM.

08-20-2005, 05:08 PM	#11
CAL 58 GMC Senior Member Join Date: Jun 2005 Location: Clovis Ca. Posts: 3,311	Thanks N2TRUX! I will give it a try. By the way, I like your truck! I had a 79 and keep the moldings on like you have....I love the look! Last edited by CAL 58 GMC; 08-20-2005 at 05:09 PM.

08-20-2005, 05:40 PM	#12
CAL 58 GMC Senior Member Join Date: Jun 2005 Location: Clovis Ca. Posts: 3,311	Okay, I am going to try and upload a larger photo. I just put my rear diff. in. It came out of a 2003 S-10 Blazer with disc brakes. I don't have my 20's on in the photo. I need to get a set of adapters for spacing and due to the fact when I ordered the wheels I ordered the wrong bolt pattern. I ordered 5x4.25 and it should have been 5x4.75. Summit Racing will not take back wheels if you have mounted the tires. Attached Images Last edited by CAL 58 GMC; 08-23-2006 at 02:14 PM.

07-09-2005, 01:05 AM	#3
CAL 58 GMC Senior Member Join Date: Jun 2005 Location: Clovis Ca. Posts: 3,311	I just got my create motor in! I will post some pixs soon.

07-13-2005, 11:28 AM	#5
DLRichards85 Registered User Join Date: Jul 2005 Location: California City, Ca Posts: 23	Verry Nice, I can't wait to see the end result of 1000's of hours of work. Should look Awesome!!! Good Luck "Gentelmen start your Creditcards!" LOL it is addictive.

07-15-2005, 06:36 AM	#6
CAL 58 GMC Senior Member Join Date: Jun 2005 Location: Clovis Ca. Posts: 3,311	Yes it is addictive!! The strang thing is, once your projects done, you want to sell it and start a new one.....Yes it's addictive...LOL! Thanks DLRichard85 for checking it out.

07-16-2005, 07:42 PM	#13
thebeemanone Registered User Join Date: Jan 2005 Location: Middleburg, Fl Posts: 57	Hey That looks great but it looks to be a 57 or earler 58 and 59 had the 4 head light system. Last edited by thebeemanone; 07-16-2005 at 07:43 PM.

07-16-2005, 09:11 PM	#14
CAL 58 GMC Senior Member Join Date: Jun 2005 Location: Clovis Ca. Posts: 3,311	Thanks! It's a 58 GMC cab with a 55 clip.

07-25-2005, 12:51 AM	#15
CAL 58 GMC Senior Member Join Date: Jun 2005 Location: Clovis Ca. Posts: 3,311	I just got my Tilt column & billit wheel. The column is 30 inch DD Flamming River. The wheel I got off of an e-bay auction. I have a Lokar shifter for the floor. Here is a picture. Attached Images Last edited by CAL 58 GMC; 09-13-2005 at 04:23 PM.

08-14-2005, 08:31 PM	#16
CAL 58 GMC Senior Member Join Date: Jun 2005 Location: Clovis Ca. Posts: 3,311	Instrument Cluster I just got done putting together the instrumet panel. Since the GMC has a different gauge cluster (which I don't like) then the Chevy, I wanted to have something more custom. The bezel is from Billit Specialties for a 32 Ford. The gauges are Auto Meter. I am filling in the stock dash openning with this cluster Attached Images Last edited by CAL 58 GMC; 06-23-2006 at 12:48 PM.

08-17-2005, 11:18 PM	#17
N2TRUX Happy to be here Join Date: Mar 2000 Location: Cypress, TX Posts: 39,023	Looks like it's going to be a nice one.... Attached Images __________________ Follow me on Facebook and Instagram @N2trux.com Articles- "Jake" the 84 to 74 crewcab "Elwood" the77_Remix 85 GMC Sierra "Scarlett" "Refining Sierra"

09-01-2005, 02:44 PM	#18
DennyB Led Sled! Discs R 4 ME! Join Date: Jan 2001 Location: Toms River, NJ, USA (Transplanted Hoosier) Posts: 7,327	Great progress! __________________ "Never ride faster than your Angel can fly" I.M.O.M,W,J&C Patriot Guard Rider

09-09-2005, 07:07 AM	#19
CAL 58 GMC Senior Member Join Date: Jun 2005 Location: Clovis Ca. Posts: 3,311	Thanks Denny B. I hope to have more pixs soon.



Register or Log In To remove these advertisements.

09-09-2005, 09:35 AM	#20
extd56 Senior Member Join Date: Nov 2004 Location: Vacaville, CA Posts: 2,272	If you are looking for a custom stepside bed let me know, I am selling one that I did not use for my extended project.

09-09-2005, 12:08 PM	#21
OrangeMach Registered User Join Date: Sep 2005 Location: TX Posts: 25	Looks real good. I hope I can the the old 59 to that stage one day. Where did you get the 55 front end?

09-09-2005, 06:34 PM	#24
CAL 58 GMC Senior Member Join Date: Jun 2005 Location: Clovis Ca. Posts: 3,311	Thanks OrangeMach, The clip came with the truck when I bought it. extd56, A few months back I could have used that bed, but since then I bought new fenders, steps, back panel, tail gate, cross braces & roll pan. Last edited by CAL 58 GMC; 09-09-2005 at 06:38 PM.

09-16-2005, 09:46 PM	#25
CAL 58 GMC Senior Member Join Date: Jun 2005 Location: Clovis Ca. Posts: 3,311	I just got the cab off the frame. The cab is headed to the body shop and the frame will soon be going in for powder coating. I used my engine hoist to pick the cab off the frame by making a cradle and bolting it to the top of the hoist. Then I pushed the hoist and the cradle into the door openings and picked it up at the top of the door jams. It worked out really well. I also put the fiberglass firewall panel on to fill the holes and smooth it all out. I got the firewall panel from Brothers. Attached Images Last edited by CAL 58 GMC; 10-28-2005 at 04:07 PM.

Register or Log In To remove these advertisements.