|
05-23-2013, 05:02 PM | #1 |
Registered User
Join Date: Sep 2011
Location: Nevada City, CA
Posts: 908
|
Ujoint sizes?
So long as I'm home from work (sick) and posting lots of questions,
What size U joint do the TF trucks take? A 1310 ? I need to rebuild the driveline & have the trans-to-center-support section shortened, want to make sure I buy the right yoke for the trans, too (bought trans without one) |
05-23-2013, 07:38 PM | #2 |
Registered User
Join Date: Jul 2007
Location: Toppenish, WA
Posts: 15,603
|
Re: Ujoint sizes?
It looks like there are different options in different spots depending on what engine and trans it had.
I looked on Napa, O'Reilly's and Rock Auto's sites and only Autozone showed U joints listed where I could find them. http://www.autozone.com/autozone/par.../N-j3zqxZ6o242 The alternate number such as 269 or 369 should be a Precision number. On the yoke it is going to have to fit the trans of choice. The original three speeds used a course splined yoke but most of the later ones use the fine spline yoke like the turbo 350 uses.
__________________
Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around. |
Bookmarks |
|
|