The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > General Truck Forums > Engine & Drivetrain > LSx Swaps

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 09-15-2016, 03:06 PM   #1
izzy_Britton
Registered User
 
izzy_Britton's Avatar
 
Join Date: Apr 2013
Location: Nor-Cal
Posts: 632
Truck won't run

I posted this in the 99-06 section but no takers yet, so I an reposting here with hopes of pandering to a larger audience.

Last week I bought a basket case, wrecked, impounded truck that came with no keys. 2003 gmc 2500HD, 6.0 / 4L80e 4x4


Because the truck came without keys i needed to get the ignition cylinder out of the column to get it started.

so i took the plastic clam shells off the column and used a pair of large channel locks to twist the ignition, amazingly enough it turned and i was able to get the release to let me remove the cylinder like you would normally do IF you had the key.

fine and dandy so far.

the message center let me know the truck was outta gas, so this morning i splashed 5 gallons in and gave it a crank.

when turning the engine over it will not start completely. it reminded me of kicking an old dirt bike... crank crank bbbrrrr crank crank bbbrrr so on and so forth until the battery died. it kinda acted like it wasnt getting fuel but pressing the button on the schrader valve squirts fuel, and the pump is pumping.

any clues as to why it wont fire and stay running? is it possible that the key was a chipped key and the VATS is preventing it from remaining running? i have heard of this issue before but have heard many people say that the truck will run for 3 seconds or more and then die and other say it will remain running until it is put into gear and then it will die. but this is always from people doing swaps.

I have the reprogrammed computer for my swap that i can install and see if it will remain running, the VATS has been removed. the problem i see with doing this is that the trans in the shop truck is a 4L80e where my swap truck is a 4L60e. is it safe to assume that if it starts and runs then the problem with the trans will be with the shifting points? i only need to move the truck in and out of the shop on weekends, cant drive it until i get all the DMV paperwork done and in the mean time i can send the shop truck computer off to have the VATS removed.

plausible?

-Izzy
__________________
WHO_DCTC - Wifes 05 Z-71 Build - Now defunct as she decided she wants an Escalade too
Cream Puff - LS'd Square - Slow going on the back burner
Tripple Threat - 3 Wrecks for the price of one build thread
Project Delongdium - Step-Sons Plastic Clad 2003 Avalanche - DONE and Delivered.
izzy_Britton is offline   Reply With Quote
Old 09-15-2016, 05:41 PM   #2
ls1nova71
Registered User
 
ls1nova71's Avatar
 
Join Date: Dec 2009
Location: Independence Mo
Posts: 4,119
Re: Truck won't run

Definitely sounds like VATS to me. Using the other computer to start it I dont think will hurt it, but like you say, you won't be able to drive it because of the transmission difference.
__________________
My '72 short bed build. http://www.ls1tech.com/forums/conver...6-0-4l80e.html

5.3 swap into my RUSTY '71 C10
http://ls1tech.com/forums/conversion...71-c-10-a.html
ls1nova71 is offline   Reply With Quote
Old 09-16-2016, 01:20 AM   #3
izzy_Britton
Registered User
 
izzy_Britton's Avatar
 
Join Date: Apr 2013
Location: Nor-Cal
Posts: 632
Re: Truck won't run

new/used Ignition cylinder fixed the problem. I used the ignition cylinder from my 05 chevy and the truck fired off first crank.

-Izzy
__________________
WHO_DCTC - Wifes 05 Z-71 Build - Now defunct as she decided she wants an Escalade too
Cream Puff - LS'd Square - Slow going on the back burner
Tripple Threat - 3 Wrecks for the price of one build thread
Project Delongdium - Step-Sons Plastic Clad 2003 Avalanche - DONE and Delivered.
izzy_Britton is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 06:23 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com