Finally!!! 67 C10 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

GCncsuHD · 01-19-2010, 09:10 PM

Well I finally got the foundation to my dream truck. I inherited my greatgrandfather's 1967 C10 Shortbed. Its a barebones model, no options, no power steering/brakes, I6, 3 on the tree, etc. My uncle has had it for about the last 10 years, and has not driven it since 2001, he couldn't find the keys, so I have not had time to try to start it yet, so I will either hotwire it temporarily, or get a key made, or swap out lock cylinders.

On to the pics:

71,128 Miles

GCncsuHD · 01-19-2010, 09:11 PM

The bad:
The only rusted through spot I found, looks to be from water stuck in the door that came from the window channel and had no where to go, Much better than I have seen in other trucks.

Rust from the spot where my greatgrandpa's arm rubbed the paint off (when I was a kid it was still just a shiny bare spot on the door)

Only wrinkle on the body, the rest was super straight.

1967 NC Tag

I will try to restore this one and run it, but my father in law has a nice 1967 tag I may try to get.

Time to unload it into it's temporary resting place. (It will get moved into the shop once I get it running, but right now my greatgranpa's 1946 Ford 2N is sitting in its way)

GCncsuHD · 01-19-2010, 09:12 PM

Had to use the old ford to move it into the final position

Few pictures I played around with.

Oh I did get one thing done to the truck...
Installed K-9 Alarm System

Sinister · 01-19-2010, 09:17 PM

Congrats.That's a sweet truck.

**Hart_Rod** · 01-19-2010, 09:21 PM

Sweet truck! Are you going to keep the topper on it??

GCncsuHD · 01-19-2010, 09:40 PM

Quote:

Originally Posted by Hart_Rod

Sweet truck! Are you going to keep the topper on it??

Thanks, and definitely not! It will be coming off as soon as I get time to clean all the clutter out of the bed of stuff that has been stored back there.

I have pretty big plans for the truck in the future: thinking LS swap, 5/6 speed with overdrive, low static drop, and probably some 20x8s in the front and 20x10s in the rear with some nice wide tires, custom gauges, vintage air, etc. Also plan on shaving the gutters smooth, pulling the cab off the frame and cleaning/painting the frame, then shaving all the molding holes and painting it probably GM Arrival Blue.

BUT all that will be in the distant future. In the mean time I plan to get it running with the 6 cyl, patch the rust in the door, and drive it.

Also if anyone has the lower rear drivers quarter panel molding / trim lying around I would be interested in picking it up. I would rather not buy new pieces as it will be removed when I actually get around to painting the truck, but in the meantime I would like to have the missing piece and drive it with the original look for a while.

**wancosc356** · 01-19-2010, 09:26 PM

Very clean truck with tons of potential! I like!

big_al_71 · 01-19-2010, 09:37 PM

That is an outstanding truck that I would love to have including that front plate!!!!!

C/10 King · 01-19-2010, 09:38 PM

I want one!!!!!! Very nice!

oldblue1968chevy · 01-19-2010, 09:38 PM

sweet!! Awesome story/truck. plans?

lower,new back bumper rest of trim get running driving good maybe disc brake upgrade and roll it!

**Hart_Rod** · 01-19-2010, 10:05 PM

Great plans! If I could figure out a way to get the topper down to FL, I would take it off your hands. I've been looking for one to put on my 68 farm truck for a while....

powell72 · 01-19-2010, 10:13 PM

Looks like a nice truck, the last pic is my favorite. I'm assuming your great grandpa bought it new?

glider_6969 · 01-19-2010, 10:21 PM

That's a nice ride. Always good to have a whole truck to work with especially if it runs too. I bet that truck good look real good with some tlc.

MESS-HALL · 01-19-2010, 10:25 PM

Quote:

Originally Posted by powell72

Looks like a nice truck, the last pic is my favorite. I'm assuming your great grandpa bought it new?

This pic right here did it for me.........Chevrolet and John Deer a match made in heaven.

GCncsuHD · 01-19-2010, 10:48 PM

Quote:

Originally Posted by Hart_Rod

Great plans! If I could figure out a way to get the topper down to FL, I would take it off your hands. I've been looking for one to put on my 68 farm truck for a while....

Road trip! The topper is in great condition too. Nice looking truck by the way.

Quote:

Originally Posted by powell72

Looks like a nice truck, the last pic is my favorite. I'm assuming your great grandpa bought it new?

Yep, The original manual, with the stamped owner plate is in the glove compartment.

Quote:

Originally Posted by msgross

I like the last two pics... great story, I like the "shop truck" look with a filler drivetrain and suspension... I wouldn't touch the paint.

Thats how it will roll for a few years until I get around to paint.

Quote:

Originally Posted by MESS-HALL

This pic right here did it for me.........Chevrolet and John Deer a match made in heaven.

Yea, the Ford is just out of view in that picture, can only see the rear fenders.

msgross · 01-19-2010, 10:21 PM

I like the last two pics... great story, I like the "shop truck" look with a filler drivetrain and suspension... I wouldn't touch the paint.

QKENUF4U · 01-19-2010, 10:57 PM

man, wheels, lowered , th350 auto, disc swap and DRIVE IT !!!! thats my dream truck to... bare bones stock and all there.... to bad that floors rotted away but even i could do a patch panel there......

gcburdic · 01-19-2010, 11:09 PM

Very nice stocker you picked up there....so where are you??..Statesville or Raleighwood??
BTW...is that tailgate original??...I don't see the CHEVROLET markings??..ummm....

GCncsuHD · 01-19-2010, 11:15 PM

Quote:

Originally Posted by gcburdic

Very nice stocker you picked up there....so where are you??..Statesville or Raleighwood??
BTW...is that tailgate original??...I don't see the CHEVROLET markings??..ummm....

Right now, Raleigh. I go to State, but I live close to Statesville normally.

And no, the tailgate was replaced sometime in the last 10 years since I saw the truck. Last I remember it had a huge dent in it. When I get around to painting the truck I will definitely go with a CHEVROLET tailgate.

gcburdic · 01-19-2010, 11:29 PM

Quote:

Originally Posted by GCncsuHD

Right now, Raleigh. I go to State, but I live close to Statesville normally.

And no, the tailgate was replaced sometime in the last 10 years since I saw the truck. Last I remember it had a huge dent in it. When I get around to painting the truck I will definitely go with a CHEVROLET tailgate.

Gotcha...well if you make it this way this summer, try and come out to this with great grandpa's truck!!!http://67-72chevytrucks.com/vboard/s...d.php?t=381982
Shoot me a PM if you're close and wanna cruise too....So Whatcha studying??

GCncsuHD · 01-20-2010, 01:00 AM

Quote:

Originally Posted by gcburdic

Gotcha...well if you make it this way this summer, try and come out to this with great grandpa's truck!!!http://67-72chevytrucks.com/vboard/s...d.php?t=381982
Shoot me a PM if you're close and wanna cruise too....So Whatcha studying??

I will definitely have to make it out to that. I know right where Dan Nicholas park is.

I'm a senior in Mechanical Engineering. Graduate in May.

chevy72pu · 01-20-2010, 10:01 AM

Looks like somebody already laid claim to your truck.

redbaron69 · 01-19-2010, 11:19 PM

man that is SWEET awsome truck

67ChevyRedneck · 01-20-2010, 11:32 AM

Very nice!

My grandpa's old trucks were all rusted out POS NY trucks. Most of the interior of one of his 72's made it into my 67 though

Zumo · 01-20-2010, 02:27 PM

Beauty.

01-19-2010, 09:10 PM	#1
GCncsuHD Charlie Daniels w/ a Tq Wrench Join Date: May 2009 Location: Statesville, NC Posts: 1,570	Finally!!! 67 C10 Well I finally got the foundation to my dream truck. I inherited my greatgrandfather's 1967 C10 Shortbed. Its a barebones model, no options, no power steering/brakes, I6, 3 on the tree, etc. My uncle has had it for about the last 10 years, and has not driven it since 2001, he couldn't find the keys, so I have not had time to try to start it yet, so I will either hotwire it temporarily, or get a key made, or swap out lock cylinders. On to the pics: 71,128 Miles __________________ ΜΟΛΩΝ ΛΑΒΕ 67 C10 Shortbed "Great Grandpa's Truck" I6 3 on the Tree 71k original miles 5.3 swap in the works 69 K5 Blazer-Family Beach Cruiser Project 78 K30 Dually Semi-Retired Fire Truck 350/SM465 35"s SOLD01 2500HD ECSB 6.0 4x4 5.13's 8" lift 38"s

01-19-2010, 09:11 PM	#2
GCncsuHD Charlie Daniels w/ a Tq Wrench Join Date: May 2009 Location: Statesville, NC Posts: 1,570	Re: Finally!!! 67 C10 The bad: The only rusted through spot I found, looks to be from water stuck in the door that came from the window channel and had no where to go, Much better than I have seen in other trucks. Rust from the spot where my greatgrandpa's arm rubbed the paint off (when I was a kid it was still just a shiny bare spot on the door) Only wrinkle on the body, the rest was super straight. 1967 NC Tag I will try to restore this one and run it, but my father in law has a nice 1967 tag I may try to get. Time to unload it into it's temporary resting place. (It will get moved into the shop once I get it running, but right now my greatgranpa's 1946 Ford 2N is sitting in its way) __________________ ΜΟΛΩΝ ΛΑΒΕ 67 C10 Shortbed "Great Grandpa's Truck" I6 3 on the Tree 71k original miles 5.3 swap in the works 69 K5 Blazer-Family Beach Cruiser Project 78 K30 Dually Semi-Retired Fire Truck 350/SM465 35"s SOLD01 2500HD ECSB 6.0 4x4 5.13's 8" lift 38"s

01-19-2010, 09:12 PM	#3
GCncsuHD Charlie Daniels w/ a Tq Wrench Join Date: May 2009 Location: Statesville, NC Posts: 1,570	Re: Finally!!! 67 C10 Had to use the old ford to move it into the final position Few pictures I played around with. Oh I did get one thing done to the truck... Installed K-9 Alarm System __________________ ΜΟΛΩΝ ΛΑΒΕ 67 C10 Shortbed "Great Grandpa's Truck" I6 3 on the Tree 71k original miles 5.3 swap in the works 69 K5 Blazer-Family Beach Cruiser Project 78 K30 Dually Semi-Retired Fire Truck 350/SM465 35"s SOLD01 2500HD ECSB 6.0 4x4 5.13's 8" lift 38"s Last edited by GCncsuHD; 01-19-2010 at 09:16 PM.

01-19-2010, 09:17 PM	#4
Sinister Between Trucks... Join Date: Mar 2002 Location: Los Angeles, CA. Posts: 3,830	Re: Finally!!! 67 C10 Congrats.That's a sweet truck. __________________ Beat it to fit, Paint it to match...

01-19-2010, 09:21 PM	#5
Hart_Rod ************* Join Date: Apr 2005 Location: Pensacola, FL Posts: 17,856	Re: Finally!!! 67 C10 Sweet truck! Are you going to keep the topper on it?? __________________ Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3

01-19-2010, 09:26 PM	#7
wancosc356 I Like Mine With No Shine! Join Date: Apr 2009 Location: SC Posts: 2,705	Re: Finally!!! 67 C10 Very clean truck with tons of potential! I like! __________________ Michael 1967 Chevrolet C10 Short Fleet (Literal Ground Up....One Day) 2006 GMC Sierra Crew Cab 4x4 1969 Lincoln Continental Coupe Project FOR SALE http://67-72chevytrucks.com/vboard/c...ct=4578&cat=17 1981 Honda CM400 C Bobber SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=384152

01-19-2010, 09:37 PM	#8
big_al_71 Registered User Join Date: Jun 2008 Location: South Florida Posts: 11,375	Re: Finally!!! 67 C10 That is an outstanding truck that I would love to have including that front plate!!!!! __________________ Get your facts first, and then you can distort them as much as you please!!!!!. Sylvester's build thread >>>http://67-72chevytrucks.com/vboard/s...ht=big+rebuild

01-19-2010, 09:38 PM	#9
C/10 King Registered User Join Date: Feb 2009 Location: A****er, CA Posts: 5,594	Re: Finally!!! 67 C10 I want one!!!!!! Very nice! __________________ C/10 Rene 1966 Short Fleet "The Hag" 1967 CST Short Fleet "Dark Poly" 1971 Short Fleet 1970 Jimmy Custom 2 WD "Golden Ticket" 1972 Blazer 2 WD "Retro Blaze"

01-19-2010, 09:38 PM	#10
oldblue1968chevy Grandpa in the rustmobile... Join Date: Nov 2008 Location: Spokane WA/Viola TN Posts: 11,422	Re: Finally!!! 67 C10 sweet!! Awesome story/truck. plans? lower,new back bumper rest of trim get running driving good maybe disc brake upgrade and roll it! __________________ John Goose-1968 C10 355,9.32-1CR, Vortec Heads ,262 voodoo, 3.73:1 3OTT (HS ride/beater/farm truck) http://67-72chevytrucks.com/vboard/s...d.php?t=317684 Grams 53-1953 Chevrolet Belair http://67-72chevytrucks.com/vboard/s...=1#post4327784 1969 Chevy C10 Shortbed 4.5/6?" Frame off resto http://67-72chevytrucks.com/vboard/s...d.php?t=548136 1999 Toyota Tacoma 4x4

01-19-2010, 10:05 PM	#11
Hart_Rod ************* Join Date: Apr 2005 Location: Pensacola, FL Posts: 17,856	Re: Finally!!! 67 C10 Great plans! If I could figure out a way to get the topper down to FL, I would take it off your hands. I've been looking for one to put on my 68 farm truck for a while.... Attached Images __________________ Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3

01-19-2010, 10:13 PM	#12
powell72 Senior Member Join Date: Jan 2005 Location: Loveland Co. Posts: 3,098	Re: Finally!!! 67 C10 Looks like a nice truck, the last pic is my favorite. I'm assuming your great grandpa bought it new? __________________ Chris 74 Custom Deluxe SWB 350/350/3.73’s 99 2wd Silverado RCSB 5.3/4L60/3.90’s http://www.classictrucks.com/feature...short_bed.html

01-19-2010, 10:21 PM	#13
glider_6969 Registered User Join Date: Jan 2010 Location: Ontario Posts: 400	Re: Finally!!! 67 C10 That's a nice ride. Always good to have a whole truck to work with especially if it runs too. I bet that truck good look real good with some tlc.

01-19-2010, 10:21 PM	#16
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Re: Finally!!! 67 C10 I like the last two pics... great story, I like the "shop truck" look with a filler drivetrain and suspension... I wouldn't touch the paint. __________________ The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer"

01-19-2010, 10:57 PM	#17
QKENUF4U Senior Member Join Date: Jan 2005 Location: SUNNY WARM BIKE RIDING COTTONWOOD ARIZONA Posts: 2,097	Re: Finally!!! 67 C10 man, wheels, lowered , th350 auto, disc swap and DRIVE IT !!!! thats my dream truck to... bare bones stock and all there.... to bad that floors rotted away but even i could do a patch panel there......

01-19-2010, 11:09 PM	#18
gcburdic Restoration Virgin! Join Date: Jan 2008 Location: Huntersville, NC Posts: 8,298	Re: Finally!!! 67 C10 Very nice stocker you picked up there....so where are you??..Statesville or Raleighwood?? BTW...is that tailgate original??...I don't see the CHEVROLET markings??..ummm.... __________________ Geoff with a G 1968 Chevy C10 SWB The Mistress 1972 Custom Deluxe C20 Suburban A Suburban Named Isabella 1966 Ford Mustang Mama's High School Graduation Present



Register or Log In To remove these advertisements.

01-20-2010, 10:01 AM	#22
chevy72pu Registered User Join Date: Jan 2009 Location: Sandersville, GA Posts: 298	Re: Finally!!! 67 C10 Looks like somebody already laid claim to your truck. Attached Images __________________ How 'Bout them Dawgs! '10 Traverse LTZ 03 Silverado Z71 ext cab 99 Yamaha Grizzly 600 72 C10 350/350 sportside bed. 68 C30 flatbed. 350 4-speed. "I've got a good memory, it's just short!"

01-19-2010, 11:19 PM	#23
redbaron69 Registered User Join Date: Jan 2009 Location: marion nc Posts: 588	Re: Finally!!! 67 C10 man that is SWEET awsome truck __________________ 69 short fleet 350/350 "under construction" 70 short step 307/3 speed

01-20-2010, 11:32 AM	#24
67ChevyRedneck Hittin E-Z Street on Mud Tires Join Date: Nov 2004 Location: Greenville, SC Posts: 23,090	Re: Finally!!! 67 C10 Very nice! My grandpa's old trucks were all rusted out POS NY trucks. Most of the interior of one of his 72's made it into my 67 though __________________ Jesse James 1967 C10 SWB Stepside: 350/700R4/3.73 1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc 1968 Pontiac Firebird: Project Fire Chicken! 2015 Silverado Double Cab 5.3L Z71 2001 Jeep Wrangler Sport 4.0L 5spd 2020 Chevrolet Equinox Premium 2.0L Turbo 2011 Mustang V6 ~ Wife's ride American Born, Country by the Grace of God 1967 CST Shop Truck Rebuild! My 1967 C-10 Build Thread My Vintage Air A/C Install Project "On a Dime" Trying my hand at Home Renovation! 1965 Mustang Modifications!

01-20-2010, 02:27 PM	#25
Zumo Hot Rods For Life Join Date: Sep 2001 Location: Waxahachie, TX Posts: 3,305	Re: Finally!!! 67 C10 Beauty. __________________ 1968 C10 LWB **SOLD* Andy Viva Los Bicicletas! Los Muertos Custom Bicycles

Register or Log In To remove these advertisements.