project Daisycutter update.....468/700R4 installed...finally... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

superchevy · 09-21-2003, 02:47 PM

Got the 468 and 700R4 installed this morning. I like the way the Brother's dropped trans crossmember fit - perfect. I threw the intake on there just to cover the lifter valley for right now. Chassis and engine done, now for the body work to begin. SC

superchevy · 09-21-2003, 02:48 PM

pic 2

superchevy · 09-21-2003, 02:49 PM

pic 3

SCOTI · 09-21-2003, 02:53 PM

Movin' right along.....

Who built your trans?

GMC71k20 · 09-21-2003, 03:42 PM

that truck is gonna be awesome

dinnut · 09-21-2003, 03:49 PM

those are some of the sweetest valve covers. tunnel ram too. might wanna cover up the tunnel ram intake. heh

FRENCHBLUE72 · 09-21-2003, 04:50 PM

That chassis is getting together quickly!!!!!

72gmcshorty · 09-21-2003, 07:30 PM

I hope those are not rusty brake lines I see...

superchevy · 09-21-2003, 08:32 PM

Thanks, guys.
Yes, I have the t-ram all covered up so nothing gets in

Yes, those are rusty brake lines. They were all tweeked up near the mastercylinder, so I'm going to replace them.
Anybody out there with a factory 72 bigblock can get me a measurement? I'm wondering what the distance is between the top of the front of the block where the intake/block mate, and the bottom of the stock hood. The tunnel ram pictured is actually a "mid-rise" Offy, and I plan on running Edelbrock carbs. Just wondering if I'm going to have to cut the hood, or maybe can get away with a looooow profile aircleaner.
Thanks, SC.

**Bowtie468** · 09-21-2003, 09:41 PM

Yeah, looking sweet SC !! Ever decided what tire/wheel combo you'll be squeezing in the rear ?

Chris

superchevy · 09-21-2003, 10:04 PM

I bought some fleetside wheel tubs at the last swapmeet, so I'm going to mini-tub the stepside bed. I'm going to get at least a 12"rim under there! SC

SCOTI · 09-21-2003, 10:13 PM

SC, are you going to run some big Mickeys or ???????

superchevy · 09-22-2003, 09:06 AM

Mickeys or maybe some old school ProTracs. I used to have some on my '78 Z-28 in highschool back in the day...

67chevemall · 09-22-2003, 10:59 AM

SC wow!

My truck came with Protrac 50's
I can't find any info on these tires or where they are from!
Do you have any info on them or a web site I could check out?
They sure are a sweet look'n tire!

The sizes are crazy aswell
I have F on the front and N 's on the Back
Beside Mickey's I can't find any other tires to fit the 15x9 and 15x11 '' Rims!

Cheers

superchevy · 09-22-2003, 11:05 AM

Yeah, ProTracs are back!!
I've seen them advertised in Superchevy and Chevy High Performance magazine.
They have a number of sizes now, including the massive Pro-street sizes.
I'll see if I can't find those ads for them somewhere.
SC

67chevemall · 09-22-2003, 11:46 AM

Cheers
SC
Can't wait to see em!

Mine are on my www.

matt67350 · 09-22-2003, 01:34 PM

Hey, that BB motor looks like it to heavy for that frame.
I have a 3/4 ton frame that it will work just fine in. LOL
Looks great, keep up the pix, gives me hope.

superchevy · 09-22-2003, 08:03 PM

HaHa, you're right matt67350, that big block is heavy

After I set it in, I was taking the lift chain off, and noticed one of the Grade 8 bolts holding the chain to the block had bent!!
A lot different than hoisting a smallblock - especially since I had the 700R4 bolted to it. I'm just glad it's in. SC

09-21-2003, 02:47 PM	#1
superchevy Got big-block? Join Date: Jul 2000 Location: Austin, Texas Posts: 2,453	project Daisycutter update.....468/700R4 installed...finally... Got the 468 and 700R4 installed this morning. I like the way the Brother's dropped trans crossmember fit - perfect. I threw the intake on there just to cover the lifter valley for right now. Chassis and engine done, now for the body work to begin. SC Attached Images __________________ '68 CST SWB factory 396/T400 buddy buckets, a/c, ps, pb '72 Corvette convertible 454/4spd/ac, ps, pb '73 GMC Sierra Grande short wide 454/T400 ps, pb, ac '77 K5 Blazer black on red, 350/T350/NP205 ps, pb, ac all original '78 GMC Sierra Classic short wide 454/T400 ps, pb, ac '72 GMC Sprint SP454. 1 of 38 built. '73 GMC Sprint SP454. 1 of 71 built. '75 GMC Sprint SP454. 1 of 25 built. SOLD! '72 GMC K25 4x4 468/4L80e/NP205 build thread http://67-72chevytrucks.com/vboard/s...23#post4324423 SOLD!'55 Chevy gasser 496/4spd build thread http://67-72chevytrucks.com/vboard/s...96#post4324396

09-21-2003, 02:48 PM	#2
superchevy Got big-block? Join Date: Jul 2000 Location: Austin, Texas Posts: 2,453	pic 2 Attached Images

09-21-2003, 02:49 PM	#3
superchevy Got big-block? Join Date: Jul 2000 Location: Austin, Texas Posts: 2,453	pic 3 Attached Images

09-21-2003, 02:53 PM	#4
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 22,040	Movin' right along..... Who built your trans? __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*

09-21-2003, 03:49 PM	#6
dinnut Registered User Join Date: Apr 2003 Location: missouri city, tx Posts: 4,486	those are some of the sweetest valve covers. tunnel ram too. might wanna cover up the tunnel ram intake. heh __________________ 70 longbed 496/th400/Ford 9"

09-21-2003, 03:42 PM	#5
GMC71k20 Registered User Join Date: Aug 2002 Location: mass Posts: 1,277	that truck is gonna be awesome

09-21-2003, 04:50 PM	#7
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,608	That chassis is getting together quickly!!!!! __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

09-21-2003, 07:30 PM	#8
72gmcshorty Registered User Join Date: Jul 2001 Location: North Delta, British Columbia Posts: 1,344	I hope those are not rusty brake lines I see... __________________ 1992 Gmc 2wd 1972 Chevy Blazer 2wd

09-21-2003, 08:32 PM	#9
superchevy Got big-block? Join Date: Jul 2000 Location: Austin, Texas Posts: 2,453	Thanks, guys. Yes, I have the t-ram all covered up so nothing gets in Yes, those are rusty brake lines. They were all tweeked up near the mastercylinder, so I'm going to replace them. Anybody out there with a factory 72 bigblock can get me a measurement? I'm wondering what the distance is between the top of the front of the block where the intake/block mate, and the bottom of the stock hood. The tunnel ram pictured is actually a "mid-rise" Offy, and I plan on running Edelbrock carbs. Just wondering if I'm going to have to cut the hood, or maybe can get away with a looooow profile aircleaner. Thanks, SC.

09-21-2003, 09:41 PM	#10
Bowtie468 Senior Member Join Date: Jun 2002 Location: Cecilia, Louisiana Posts: 1,638	Yeah, looking sweet SC !! Ever decided what tire/wheel combo you'll be squeezing in the rear ? Chris __________________ Chris click here to see my buildpage http://67-72chevytrucks.com/vboard/s...d.php?t=394656 ---------------------------------- 1979 C10 Silverado Big10 SWB Factory 454/400 Cardinal Red/Santa Fe Tan (original paint) 1969 Camaro X44 LS swap 1968 C10 SWB Fleetside (SOLD) 468BBC MultiPort TPI / Dynamic EFI P4 Black/Black 1963 Nova SS convertible (SOLD) 194 I6/ PowerGlide

09-21-2003, 10:04 PM	#11
superchevy Got big-block? Join Date: Jul 2000 Location: Austin, Texas Posts: 2,453	I bought some fleetside wheel tubs at the last swapmeet, so I'm going to mini-tub the stepside bed. I'm going to get at least a 12"rim under there! SC

09-21-2003, 10:13 PM	#12
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 22,040	SC, are you going to run some big Mickeys or ??????? __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*

09-22-2003, 09:06 AM	#13
superchevy Got big-block? Join Date: Jul 2000 Location: Austin, Texas Posts: 2,453	Mickeys or maybe some old school ProTracs. I used to have some on my '78 Z-28 in highschool back in the day...

09-22-2003, 10:59 AM	#14
67chevemall Registered User Join Date: Apr 2003 Location: NB Posts: 3,367	SC wow! My truck came with Protrac 50's I can't find any info on these tires or where they are from! Do you have any info on them or a web site I could check out? They sure are a sweet look'n tire! The sizes are crazy aswell I have F on the front and N 's on the Back Beside Mickey's I can't find any other tires to fit the 15x9 and 15x11 '' Rims! Cheers __________________ 1968 Chevy C10 307 3ott fleetside 1967 Chevy C/10 V8, 3spd, fleetside lwb.Sold 1967 Chev C/10 step, 383, M21. SOLD

09-22-2003, 11:05 AM	#15
superchevy Got big-block? Join Date: Jul 2000 Location: Austin, Texas Posts: 2,453	Yeah, ProTracs are back!! I've seen them advertised in Superchevy and Chevy High Performance magazine. They have a number of sizes now, including the massive Pro-street sizes. I'll see if I can't find those ads for them somewhere. SC



Register or Log In To remove these advertisements.

09-22-2003, 11:46 AM	#16
67chevemall Registered User Join Date: Apr 2003 Location: NB Posts: 3,367	Cheers SC Can't wait to see em! Mine are on my www. __________________ 1968 Chevy C10 307 3ott fleetside 1967 Chevy C/10 V8, 3spd, fleetside lwb.Sold 1967 Chev C/10 step, 383, M21. SOLD

09-22-2003, 01:34 PM	#17
matt67350 Registered User Join Date: May 2001 Location: Benbrook, TX Posts: 1,060	Hey, that BB motor looks like it to heavy for that frame. I have a 3/4 ton frame that it will work just fine in. LOL Looks great, keep up the pix, gives me hope. __________________ 69 swb stepside, rebuild and upgrade in progress

09-22-2003, 08:03 PM	#18
superchevy Got big-block? Join Date: Jul 2000 Location: Austin, Texas Posts: 2,453	HaHa, you're right matt67350, that big block is heavy After I set it in, I was taking the lift chain off, and noticed one of the Grade 8 bolts holding the chain to the block had bent!! A lot different than hoisting a smallblock - especially since I had the 700R4 bolted to it. I'm just glad it's in. SC

Register or Log In To remove these advertisements.