Cold Case is here to help - The 1947 - Present Chevrolet & GMC Truck Message Board Network

duallyjams · 12-12-2016, 06:30 PM

http://www.coldcaseradiators.com/

**truckdude239** · 12-05-2017, 10:48 AM

i was told that yal yal are going to have a ls swap raidatior for a 71c-10 in the works for after start of the year can you tell me a price with fans and does it have a stream port built in

**truckdude239** · 12-05-2017, 02:14 PM

Im fine with running trans lines to the left side what kind of price do yal have on it?

Steve Cole · 12-05-2017, 06:51 PM

If your name is Chris, you sold me a 67-72 c10 LS swap radiator/fan combo at the Charlotte Good Guys show a few months ago. I was told that it was a new product but in the production cue and would be ready in December. I didn't need it right away so I placed the order. I was all excited about it and even promoted your product to Truckdude239 (also on this thread). He called and was told that you guys are not making the LS swap c10 radiator and that he should buy the Chevelle radiator because it was similar. I said, "that can't be, I just bought one". I figured that was obviously a mistake so I called your company and was told the same thing! Were you just going to send me a Chevelle radiator and not say anything? I did receive a call from someone else at your company asking if I wanted to buy the Chevelle radiator and I told him I needed a couple of days to think about it. He said he would call again the following week to see if I wanted it but he never called back! You guys are off to a bad start in the customer service dept. and if you treat everyone this way, you won't be around long either. BTW... Even though you (Chris) "sold" me the original radiator, I have yet to hear from you since.

Buyer beware!

DLW · 12-05-2017, 07:21 PM

Odd you were told that:
http://coldcaseradiators.com/chevrol...m-radiator-at/

67-76 Chevy GMC Pickup Truck LS SWAP Aluminum Radiator AT

Steve Cole · 12-06-2017, 12:45 AM

What is "odd" is that is the same part number radiator as their 68-72 Chevelle radiator, even though the sizes between the two vehicles are a little different. Which one isn't a direct fit replacement? I'm guessing the C10 since that wasn't listed a few days ago. Plus, they told me it wasn't the same size when they tried to sell it to me.

DLW · 12-06-2017, 12:48 AM

Some espalining to do I recon..

**truckdude239** · 12-19-2017, 12:12 PM

i talked to erik i ordered the abody ls radiator and fans so when i get it in a few weeks i will post up some pictures of it and the install

**GMC-YA68** · 12-26-2017, 03:02 PM

Any plans to make a LSX style with fans for a 63-66?

**truckdude239** · 12-27-2017, 06:25 PM

I got my radiator today the radiator looks good quality wise was little disappointed that where was no paper work other the. The reciept, the fan shoud said not to install untill you read the intrustions there was none, also there is a place for the stream port but it had a cap in it i was luckly to find a fitting in my tool box at work that fit tbe port and hose. Fans look good but wish they offered the matching pig tail for the fan plug which i will have to either try and find or cut them off and wire it into my harness also make sure to order a radiator cap with your order as it does not come with one and it does not have any ppaperwork telling which cap u can buy at tbe local store but my cap on my old radiator fit it. over all i am happy with the radiator and erik at cold case was awesome to deal with and called me right back today to answer the questions i had. So with all that said the a body ls radiator went right in my trucks so my friends dont be scared to deal with them erik was up front about everything and great to deal with

**truckdude239** · 12-27-2017, 06:49 PM

I went back though all the boxs and did not find the envelope so no instructions or emblem but not a big deal to me might be because i didnt get the wiring kit for tbe fans
Do you know where i can find the plugs for the fans other then thst i am completely happy with it i can say any more then i love that the radiator has a life time warranty!

**truckdude239** · 12-27-2017, 08:00 PM

That was the plug on the fan it self that came with the radiator

**truckdude239** · 01-04-2018, 05:07 AM

Quote:

Originally Posted by Ccas

That plug will fit our harness but I agree it doesn't 'click' into place like we want it to. We're going to improve the harness connector.

I vot some off amazon i am going to try today misread tbe ad and kt was for like 7 buxs for 10 of them i thought it was 7 dollars one set so i have 20 sets of felmale and male conecctors lol

mcmlxix · 01-04-2018, 07:39 AM

Quote:

Originally Posted by Ccas

That plug will fit our harness but I agree it doesn't 'click' into place like we want it to. We're going to improve the harness connector.

Weather pack connectors or deutsch connector?
Both are available the end user, are a quality product and can tie into existing engine or body harness..

mcmlxix · 01-03-2018, 02:58 AM

Are there any plans for a 1973-1987 square body truck LSx SWAP radiator?

DLW · 01-04-2018, 03:27 PM

Maybe a dumb question here. Is it possible to get the 63-66 C10 radiator, but with the mounting bracket from the 60-62 radiator?

My 66 core/radiator support has the mounting holes in it to take the 60-62 brackets and I like that it pulls the radiator up tighter to the radiator support. Is there any downside to doing this?

**Captainfab** · 01-05-2018, 12:09 AM

The holes in your radiator support are for attaching the side panels that the factory fan shroud attaches to. I do not know if those holes are spaced the same as on a '60-'62 radiator support. You will also have to run an electric fan(s) in doing that.

Quote:

Originally Posted by DLW

Maybe a dumb question here. Is it possible to get the 63-66 C10 radiator, but with the mounting bracket from the 60-62 radiator?

My 66 core/radiator support has the mounting holes in it to take the 60-62 brackets and I like that it pulls the radiator up tighter to the radiator support. Is there any downside to doing this?

DLW · 01-05-2018, 12:34 AM

Thanks captainfab, I knew there was something off with my logic. I new the stock fan shrouds went there but did not know if the hole spacing was different either. I have an aftermarket alum. radiator with E fans now (I did an LS3 swap), but would have been nice to eliminate the stock cradle mounts and use the holes in the radiator support instead to mount it, I don't use the shrouds. Right now my VA condenser mounts in those same holes. I think I had a case of wishful thinking with this idea

..

72c20customcamper · 07-25-2018, 12:00 PM

I purchased rad, fans, wiring kit and shroud kit for my truck from Chris at the Syracuse nationals. Opemed the wiring kit box no instruction . Though they may be in the fan box . Nothing. Is there a pdf I can download?

**truckdude239** · 07-25-2018, 12:22 PM

Quote:

Originally Posted by 72c20customcamper

I purchased rad, fans, wiring kit and shroud kit for my truck from Chris at the Syracuse nationals. Opemed the wiring kit box no instruction . Though they may be in the fan box . Nothing. Is there a pdf I can download?

Not that i know of i had to wing mine but my fans are run off the ls harness

72c20customcamper · 07-25-2018, 01:04 PM

Quote:

Originally Posted by truckdude239

Not that i know of i had to wing mine but my fans are run off the ls harness

I have installed electric fans kits on other cars. But used DeWitt kits ,very detailed instructions.
Not really happy going into it blind

72c20customcamper · 07-25-2018, 01:43 PM

Eric at cold case sent me the instructions very good customer service . I posted them here in case anyone else needs them.

Ccas · 07-25-2018, 02:04 PM

Quote:

Originally Posted by 72c20customcamper

I purchased rad, fans, wiring kit and shroud kit for my truck from Chris at the Syracuse nationals. Opemed the wiring kit box no instruction . Though they may be in the fan box . Nothing. Is there a pdf I can download?

Yikes. So sorry for that. I had 2 different production runs of kits in the trailer. You may have gotten an old one? What color was the box and was it shiny or flat in color?

If you give me your e-mail, I'll send you the pdf.

Again, my apologies.

Chris

72c20customcamper · 07-25-2018, 02:56 PM

All good. As I said Eric gave me everything I needed. Also my shroud came today so I'm all good .

Ccas · 07-25-2018, 03:59 PM

Quote:

Originally Posted by 72c20customcamper

All good. As I said Eric gave me everything I needed. Also my shroud came today so I'm all good .

ha! ok, when I posted my reply, your post above was not there. So I was unaware. Glad you are all set!

12-12-2016, 06:30 PM	#1
duallyjams Registered User Join Date: May 2007 Location: Deale Md Posts: 4,663	Re: Cold Case is here to help http://www.coldcaseradiators.com/ __________________ James 63 GMC V6 4speed carryall 65 chevy swb bbw V8 auto 68 K20 327/4 speed, buddy buckets 2002 GMC CC Dually Duramax 64 GMC lwb 3/4 V6 4speed SOLD 66 GMC swb bbw buddy buckets SOLD IG duallyjams The only thing that stays the same is constant change!

12-05-2017, 10:48 AM	#2
truckdude239 Senior Member Join Date: Sep 2005 Location: Lewisville, Nc Posts: 10,237	Re: Cold Case is here to help i was told that yal yal are going to have a ls swap raidatior for a 71c-10 in the works for after start of the year can you tell me a price with fans and does it have a stream port built in __________________ David fuller Ase Certified Mechanic Click here to help support our board!! 1971 Chevy c-10 under going a 4.8l LSx swap Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=421305 2007 Honda Accord my daily 145kmiles 2002 Honda Accord 4 door With 330k(sisters car) 2005 toyota Avalon 228k( brothers car) 2002 Sububran 5.3 245k 2000 Tahoe 5.3l 378 General manager for Marco's Carwash & lube

12-05-2017, 02:14 PM	#3
truckdude239 Senior Member Join Date: Sep 2005 Location: Lewisville, Nc Posts: 10,237	Re: Cold Case is here to help Im fine with running trans lines to the left side what kind of price do yal have on it? __________________ David fuller Ase Certified Mechanic Click here to help support our board!! 1971 Chevy c-10 under going a 4.8l LSx swap Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=421305 2007 Honda Accord my daily 145kmiles 2002 Honda Accord 4 door With 330k(sisters car) 2005 toyota Avalon 228k( brothers car) 2002 Sububran 5.3 245k 2000 Tahoe 5.3l 378 General manager for Marco's Carwash & lube

12-05-2017, 06:51 PM	#4
Steve Cole Registered User Join Date: May 2012 Location: Faith,NC Posts: 1,626	Re: Cold Case is here to help If your name is Chris, you sold me a 67-72 c10 LS swap radiator/fan combo at the Charlotte Good Guys show a few months ago. I was told that it was a new product but in the production cue and would be ready in December. I didn't need it right away so I placed the order. I was all excited about it and even promoted your product to Truckdude239 (also on this thread). He called and was told that you guys are not making the LS swap c10 radiator and that he should buy the Chevelle radiator because it was similar. I said, "that can't be, I just bought one". I figured that was obviously a mistake so I called your company and was told the same thing! Were you just going to send me a Chevelle radiator and not say anything? I did receive a call from someone else at your company asking if I wanted to buy the Chevelle radiator and I told him I needed a couple of days to think about it. He said he would call again the following week to see if I wanted it but he never called back! You guys are off to a bad start in the customer service dept. and if you treat everyone this way, you won't be around long either. BTW... Even though you (Chris) "sold" me the original radiator, I have yet to hear from you since. Buyer beware!

12-05-2017, 07:21 PM	#5
DLW Registered User Join Date: Apr 2014 Location: Union City, CA Posts: 384	Re: Cold Case is here to help Odd you were told that: http://coldcaseradiators.com/chevrol...m-radiator-at/ 67-76 Chevy GMC Pickup Truck LS SWAP Aluminum Radiator AT

12-06-2017, 12:45 AM	#6
Steve Cole Registered User Join Date: May 2012 Location: Faith,NC Posts: 1,626	Re: Cold Case is here to help What is "odd" is that is the same part number radiator as their 68-72 Chevelle radiator, even though the sizes between the two vehicles are a little different. Which one isn't a direct fit replacement? I'm guessing the C10 since that wasn't listed a few days ago. Plus, they told me it wasn't the same size when they tried to sell it to me.

12-06-2017, 12:48 AM	#7
DLW Registered User Join Date: Apr 2014 Location: Union City, CA Posts: 384	Re: Cold Case is here to help Some espalining to do I recon..

12-19-2017, 12:12 PM	#8
truckdude239 Senior Member Join Date: Sep 2005 Location: Lewisville, Nc Posts: 10,237	Re: Cold Case is here to help i talked to erik i ordered the abody ls radiator and fans so when i get it in a few weeks i will post up some pictures of it and the install __________________ David fuller Ase Certified Mechanic Click here to help support our board!! 1971 Chevy c-10 under going a 4.8l LSx swap Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=421305 2007 Honda Accord my daily 145kmiles 2002 Honda Accord 4 door With 330k(sisters car) 2005 toyota Avalon 228k( brothers car) 2002 Sububran 5.3 245k 2000 Tahoe 5.3l 378 General manager for Marco's Carwash & lube

12-26-2017, 03:02 PM	#9
GMC-YA68 Senior Member Join Date: Mar 2004 Location: Lee's Summit, MO (KC) Posts: 742	Re: Cold Case is here to help Any plans to make a LSX style with fans for a 63-66? __________________ -Keegan- '72 Jimmy 4x4 - 5.3/4L65E/NP205 swap http://67-72chevytrucks.com/vboard/s...d.php?t=663780

12-27-2017, 06:25 PM	#10
truckdude239 Senior Member Join Date: Sep 2005 Location: Lewisville, Nc Posts: 10,237	Re: Cold Case is here to help I got my radiator today the radiator looks good quality wise was little disappointed that where was no paper work other the. The reciept, the fan shoud said not to install untill you read the intrustions there was none, also there is a place for the stream port but it had a cap in it i was luckly to find a fitting in my tool box at work that fit tbe port and hose. Fans look good but wish they offered the matching pig tail for the fan plug which i will have to either try and find or cut them off and wire it into my harness also make sure to order a radiator cap with your order as it does not come with one and it does not have any ppaperwork telling which cap u can buy at tbe local store but my cap on my old radiator fit it. over all i am happy with the radiator and erik at cold case was awesome to deal with and called me right back today to answer the questions i had. So with all that said the a body ls radiator went right in my trucks so my friends dont be scared to deal with them erik was up front about everything and great to deal with Attached Images __________________ David fuller Ase Certified Mechanic Click here to help support our board!! 1971 Chevy c-10 under going a 4.8l LSx swap Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=421305 2007 Honda Accord my daily 145kmiles 2002 Honda Accord 4 door With 330k(sisters car) 2005 toyota Avalon 228k( brothers car) 2002 Sububran 5.3 245k 2000 Tahoe 5.3l 378 General manager for Marco's Carwash & lube

12-27-2017, 06:49 PM	#11
truckdude239 Senior Member Join Date: Sep 2005 Location: Lewisville, Nc Posts: 10,237	Re: Cold Case is here to help I went back though all the boxs and did not find the envelope so no instructions or emblem but not a big deal to me might be because i didnt get the wiring kit for tbe fans Do you know where i can find the plugs for the fans other then thst i am completely happy with it i can say any more then i love that the radiator has a life time warranty! __________________ David fuller Ase Certified Mechanic Click here to help support our board!! 1971 Chevy c-10 under going a 4.8l LSx swap Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=421305 2007 Honda Accord my daily 145kmiles 2002 Honda Accord 4 door With 330k(sisters car) 2005 toyota Avalon 228k( brothers car) 2002 Sububran 5.3 245k 2000 Tahoe 5.3l 378 General manager for Marco's Carwash & lube

12-27-2017, 08:00 PM	#12
truckdude239 Senior Member Join Date: Sep 2005 Location: Lewisville, Nc Posts: 10,237	Re: Cold Case is here to help That was the plug on the fan it self that came with the radiator __________________ David fuller Ase Certified Mechanic Click here to help support our board!! 1971 Chevy c-10 under going a 4.8l LSx swap Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=421305 2007 Honda Accord my daily 145kmiles 2002 Honda Accord 4 door With 330k(sisters car) 2005 toyota Avalon 228k( brothers car) 2002 Sububran 5.3 245k 2000 Tahoe 5.3l 378 General manager for Marco's Carwash & lube

01-03-2018, 02:58 AM	#15
mcmlxix Collector of Projects Join Date: Apr 2003 Location: Las Vegas Posts: 3,106	Re: Cold Case is here to help Are there any plans for a 1973-1987 square body truck LSx SWAP radiator? __________________ Rich 1972 K5 Blazer CST Click HERE D60 BIG BRAKE UPGRADE Click HERE

01-04-2018, 03:27 PM	#16
DLW Registered User Join Date: Apr 2014 Location: Union City, CA Posts: 384	Re: Cold Case is here to help Maybe a dumb question here. Is it possible to get the 63-66 C10 radiator, but with the mounting bracket from the 60-62 radiator? My 66 core/radiator support has the mounting holes in it to take the 60-62 brackets and I like that it pulls the radiator up tighter to the radiator support. Is there any downside to doing this?

01-05-2018, 12:34 AM	#18
DLW Registered User Join Date: Apr 2014 Location: Union City, CA Posts: 384	Re: Cold Case is here to help Thanks captainfab, I knew there was something off with my logic. I new the stock fan shrouds went there but did not know if the hole spacing was different either. I have an aftermarket alum. radiator with E fans now (I did an LS3 swap), but would have been nice to eliminate the stock cradle mounts and use the holes in the radiator support instead to mount it, I don't use the shrouds. Right now my VA condenser mounts in those same holes. I think I had a case of wishful thinking with this idea ..



Register or Log In To remove these advertisements.

07-25-2018, 12:00 PM	#19
72c20customcamper Registered User Join Date: Jul 2018 Location: Catskill Mountains,NY Posts: 8,653	Re: Cold Case is here to help I purchased rad, fans, wiring kit and shroud kit for my truck from Chris at the Syracuse nationals. Opemed the wiring kit box no instruction . Though they may be in the fan box . Nothing. Is there a pdf I can download?

07-25-2018, 01:43 PM	#22
72c20customcamper Registered User Join Date: Jul 2018 Location: Catskill Mountains,NY Posts: 8,653	Re: Cold Case is here to help Eric at cold case sent me the instructions very good customer service . I posted them here in case anyone else needs them. Attached Images

07-25-2018, 02:56 PM	#24
72c20customcamper Registered User Join Date: Jul 2018 Location: Catskill Mountains,NY Posts: 8,653	Re: Cold Case is here to help All good. As I said Eric gave me everything I needed. Also my shroud came today so I'm all good .

Register or Log In To remove these advertisements.