What did you accomplish this weekend, ending 9-9-07? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

67ChevyRedneck · 09-08-2007, 09:55 PM

Hey all, I know it's early, but I'm pooped so I figured I'd let y'all know why I'm pooped.

I FINALLY installed the tranny cooler I've been holding on to for over a year now. I also bumped my radiator up from a 3 row to a 4 row.

Tips for others who wish to do this, it's much easier to have the core support out of the truck! It's impossible to get bolts into the bottom holders (I ended up using pop rivets) AND you have to bend (or cut out) a small section of the core support. I bent mine for now, but will properly fix it someday

Also, the radiator shroud fits... but tight. You need to tug at it a bit to get the bolts in the bottom.

I also took a steam cleaner to the rug and seat.

Thinking about painting the roof white tomorrow....

msgross · 09-08-2007, 09:58 PM

I mowed my yard...

tomorrow is wallpaper removal (please shoot me now!)

might clean a path in the garage so that I can see my project again

**70cst** · 09-08-2007, 10:03 PM

I bought some window wing vents assemblies.

PanelDeland · 09-08-2007, 10:07 PM

Cleaned the gutters(just in case we really don't live in a desert),assembled the wheels and handles on my new toolbox,picked up some drawer liners too.Bought put on endcaps and replaced the countertop in my home office.Put new microwave in the basement den,Took the QOV to lunch and shopping for a couple blouses for a work conference.
Tommorow I get to organize the toolbox and garage a bit and reload the bookcases in my HO.

67-72williso · 09-08-2007, 10:33 PM

I think I`ll go junkyarding in the morning.I got to get rear spring plates for the 3 1/2" tubes.
Later, Willis

sleepyboy · 09-08-2007, 10:50 PM

Got bedwood from Mar-K YIPPEEEEE

**68 Stepside** · 09-08-2007, 11:15 PM

I did some touch up to the flat black on the 68, gonna work on doing the drivers door tomorrow, then it'll all be one color for the first time in at least 6 years! I think I'm also going to buy a new battery for it, and start working on the rear brakes.

Omnivec · 09-08-2007, 11:54 PM

I painted my 67

70c10 · 09-08-2007, 11:43 PM

I got my swimming pool closed for the season. I'm tired!!!

centsless · 09-09-2007, 12:21 AM

I sprayed a bedliner in a friends 02 f 250. Then went up the street to check on my neighbor, who was in an accident. He was pulling another neighbors trailer, and hurt it pretty bad. He is fine, just shook up. Had the trailer brought back to my house, and pulled the axle, springs, and left fender off, to measure for new parts. Then put new rear wheel bearings in the left rear of yet another neighbors 91 Dodge Spirit. Tomorrow I am going to put corner strobes in the neighbors (with the trailer) Dodge dually. My neighbors sure do keep me busy...

bad6772 · 09-09-2007, 03:44 AM

im painting my frame. POR 15, SAT , AND SUNDAY IM GONNA BAsE IT AND CLEAR IT.....SEEMS ALONG TIME COMING

blukangoo · 09-09-2007, 03:52 AM

I got my new tires put on yesterday and took her for a little spin without any plates. That was fun after just about a year of restoration.

**Palf70Step** · 09-09-2007, 08:31 AM

Cleaned and painted the underside of my bed and remounted it. Patched my core support and have it mostly repainted. Found and cleaned my fan shroud, as well as cleaning the undercoating off the passenger inner fender so I can patch it later. Not sure how much I'll get done today.

http://67-72chevytrucks.com/vboard/s...=221437&page=4

72GMCburban · 09-09-2007, 08:45 AM

Omni: NICE!! wish I had that much(clean) garage space.
Bluk: Love the raised white letter tires.
Glad to see I am not alone, many of us seem to have non truck chores this weekend. Mine? The wifes Mazda had a check engine light come on, replaced the bank 1 O2 sensor and cleaned and re-gapped her plugs, Check light is now gone, so now she's happy so the whole house gets to be happy now too LOL

71see10 · 09-09-2007, 08:56 AM

Started prefitting wood in 72bluz (chuckles) truck and drilling all the hole!!

Also went truck hunting late last night,with some help from a spot light we found one,it almost got away.Wonder who this belongs too!!!!!!

glock35ipsc · 09-09-2007, 11:15 AM

Got the shop cleaned up yesterday, found some tools I forgot I had! Worked on the tractor a little bit too, now the hydraulic steering works like it's suppose to.

Today, the shed gets cleaned out and organized so that I can get some of the larger truck parts out of the shop and into the shed. Then I'll move the rolling chassis out of the big shop down to the small shop. Then I can have more room to start squirting primer!

Big D · 09-09-2007, 11:30 AM

Not much the truck this weekend. I'm coming to the realization that winter is coming and I havent got any of my house projects finished. So I spent all day Saturday painting and caulking.

I did get the front clip on the 72 Friday night. Once I get everthing aligned I can finish welding in the cab corners and rockers. Hopefuly I can pickup the new heads this week and get the motor running again. Its getting old pushing it in and out of the garage.

jd4300fel · 09-09-2007, 01:14 PM

I was able to put the my custom longhorn bed back on the truck. I made my own longhorn from two beds, two metal floors. I also added fuel filler doors.
I painted the bed rustoleum black hammer finish.

Kurt L · 09-09-2007, 02:24 PM

well i changed the oil in my 88 burb saturday,shot some grease to it.i haven't done muh to it since i bought bout a yr ago.so i gave it some TLC.took off the cowl cleaned all that out [leaves, sticks].re hooked up the windshield washer lines on the wipers,cleaned it all out.took and was checking out my air cleaner and the flap for the heat sensor was closed so i fixed that turned my air cleaner cover up side down,now it's getting all the air it needs.

woodridge · 09-09-2007, 04:42 PM

Retired from the Air National Guard.

cory321 · 09-09-2007, 04:57 PM

Bought stuff to keep me occupied next weekend

Texasdeere · 09-09-2007, 05:05 PM

The interior still looks like a$$ but I like this new wheel. Kind of matches the door pannel.

**68 Stepside** · 09-09-2007, 07:21 PM

I got the painting done...just rattle-can, and a lot of touch up, so don't mind the "stripes" I cleaned up the rust as good as I could, and re-sprayed the flat black so it has a little "protection". I also tracked down some wiring gremlins and got them taken care of.

kxnomore · 09-09-2007, 07:30 PM

Finally got around to installing a new Pinion seal in my front axle. That went great so I also pulled the rear cover and cleaned it up and repainted it and got it back on with too much black silicone, but the truck should be leak free now!

Plus went Junkyard hunting and found a couple of nice parts.

RANDY COX · 09-09-2007, 05:03 PM

I too am TIRED Worked all week on my car 48 fleetline sanding and body work and then helped my bro sand a pickup truck and my finger tips are so smooooth.Cain't wait to get done,yea right.MSGROSS I feel for ya buddy with the wall paper,Iv'e had my share with that stuff.

09-08-2007, 09:55 PM	#1
67ChevyRedneck Hittin E-Z Street on Mud Tires Join Date: Nov 2004 Location: Greenville, SC Posts: 23,090	What did you accomplish this weekend, ending 9-9-07? Hey all, I know it's early, but I'm pooped so I figured I'd let y'all know why I'm pooped. I FINALLY installed the tranny cooler I've been holding on to for over a year now. I also bumped my radiator up from a 3 row to a 4 row. Tips for others who wish to do this, it's much easier to have the core support out of the truck! It's impossible to get bolts into the bottom holders (I ended up using pop rivets) AND you have to bend (or cut out) a small section of the core support. I bent mine for now, but will properly fix it someday Also, the radiator shroud fits... but tight. You need to tug at it a bit to get the bolts in the bottom. I also took a steam cleaner to the rug and seat. Thinking about painting the roof white tomorrow.... __________________ Jesse James 1967 C10 SWB Stepside: 350/700R4/3.73 1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc 1968 Pontiac Firebird: Project Fire Chicken! 2015 Silverado Double Cab 5.3L Z71 2001 Jeep Wrangler Sport 4.0L 5spd 2020 Chevrolet Equinox Premium 2.0L Turbo 2011 Mustang V6 ~ Wife's ride American Born, Country by the Grace of God 1967 CST Shop Truck Rebuild! My 1967 C-10 Build Thread My Vintage Air A/C Install Project "On a Dime" Trying my hand at Home Renovation! 1965 Mustang Modifications! Last edited by 67ChevyRedneck; 09-08-2007 at 10:09 PM.

09-08-2007, 09:58 PM	#2
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Re: What did you accomplish this weekend, ending 9-9-07? I mowed my yard... tomorrow is wallpaper removal (please shoot me now!) might clean a path in the garage so that I can see my project again __________________ The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer" Last edited by msgross; 09-08-2007 at 09:59 PM.

09-08-2007, 10:03 PM	#3
70cst Senior Member Join Date: Feb 2001 Location: New Madison, Ohio Posts: 21,375	Re: What did you accomplish this weekend, ending 9-9-07? I bought some window wing vents assemblies. __________________ A husband can be right...or...A husband can be happy. 67-72 Chevy and GMC Trucks...The Classic Truck for the Classic Folk. 1970 CST Two tone green, 402BB, 400 Automatic, Tach, Buckets, AC, AM-FM, Tilt, GM CB, GM 8 Tract, LWB, etc JOHN 17:3...The better side of "LIFE" Remember: Everyday is a good day...Some are just gooder!

09-08-2007, 10:07 PM	#4
PanelDeland I am a Referee of life. Join Date: Jun 2000 Location: Greensboro N.C. Posts: 13,993	Re: What did you accomplish this weekend, ending 9-9-07? Cleaned the gutters(just in case we really don't live in a desert),assembled the wheels and handles on my new toolbox,picked up some drawer liners too.Bought put on endcaps and replaced the countertop in my home office.Put new microwave in the basement den,Took the QOV to lunch and shopping for a couple blouses for a work conference. Tommorow I get to organize the toolbox and garage a bit and reload the bookcases in my HO. __________________ The 47-present Chevrolet and GMC Truck Message Board Network,it's owners,moderators,members,and associates of any type should not be held responsible for my opinion. You can't fix stupid,not even with duct tape. "My appearance is due to the fact that "GOD" does punish you for having too much fun!" Barrett-Jackson has perfected alchemy,they make rust into gold! "You can lead a horse to water but you can't saddle a duck" "Cleverly disguised as a 'Responsible Adult' "Sometimes your Knight in shining armor is just a retard in tinfoil"

09-08-2007, 10:33 PM	#5
67-72williso Junk/Daily Driver Club Join Date: Feb 2004 Location: Manheim, PA 17545 Posts: 253	Re: What did you accomplish this weekend, ending 9-9-07? I think I`ll go junkyarding in the morning.I got to get rear spring plates for the 3 1/2" tubes. Later, Willis __________________ Daily Driver: 1970 C-20 400 sbc,sm-465,Dana 61 one ton SRW rear, 3.07 gears, locker. There are three kinds of people: those who make things happen, those who watch things happen, and those who have no idea what happened!

09-08-2007, 10:50 PM	#6
sleepyboy '69 Step Join Date: Mar 2005 Location: Marion, Texas Posts: 722	Re: What did you accomplish this weekend, ending 9-9-07? Got bedwood from Mar-K YIPPEEEEE __________________ It's my truck, and Yes, I CUT the dash, so what??

09-08-2007, 11:15 PM	#7
68 Stepside huh? Join Date: May 2000 Location: Washington, Illinois Posts: 5,692	Re: What did you accomplish this weekend, ending 9-9-07? I did some touch up to the flat black on the 68, gonna work on doing the drivers door tomorrow, then it'll all be one color for the first time in at least 6 years! I think I'm also going to buy a new battery for it, and start working on the rear brakes. __________________ Someday when I'm lonely, Wishing you weren't so far away, Then I will remember Things we said today. RIP El Jay

09-08-2007, 11:54 PM	#8
Omnivec Registered User Join Date: May 2007 Location: CA Posts: 39	Re: What did you accomplish this weekend, ending 9-9-07? I painted my 67 Attached Images __________________ 67 3/4 Lwb Step side X San Diego County truck 70 3/4 berb was 402 Th400 Dana 60 now just the dana 70 3/4 lwb Fleet Choptop bagged th350 no eng yet 79 rx7 Wide body 350 TPI t5 flat black(The interceptor) 64 comet mounted on a 93 Thunderbird chassis.

09-08-2007, 11:43 PM	#9
70c10 67-72 Addict! Join Date: Feb 2002 Location: The TAX State! Posts: 7,857	Re: What did you accomplish this weekend, ending 9-9-07? I got my swimming pool closed for the season. I'm tired!!! __________________ Jim 1970 C/10 Fleetside w/Ghost Flames Lowered 4.5" front and 4" rear (Raked) 355/350 Turbo w/shift kit 10" Redneck Performance Verter w/2500 stall Hooker Super Comps part#2808-1 Performer RPM Air-Gap 12 Bolt w/3:73 gears- Eaton Posi Comp Cams XE262 with 1.6 Crane Energizers, Road Demon 625 and Brodix IK 180 heads

09-09-2007, 12:21 AM	#10
centsless sufficiently talented fool Join Date: Jun 2006 Location: Forest Hill, MD Posts: 2,231	Re: What did you accomplish this weekend, ending 9-9-07? I sprayed a bedliner in a friends 02 f 250. Then went up the street to check on my neighbor, who was in an accident. He was pulling another neighbors trailer, and hurt it pretty bad. He is fine, just shook up. Had the trailer brought back to my house, and pulled the axle, springs, and left fender off, to measure for new parts. Then put new rear wheel bearings in the left rear of yet another neighbors 91 Dodge Spirit. Tomorrow I am going to put corner strobes in the neighbors (with the trailer) Dodge dually. My neighbors sure do keep me busy... __________________ "it's impossible to be surrounded by idiots when you are part of the circle" 2003 Suburban 2002 Pontiac Montana 1981 Corvette 1966 Impala Convertible Click here to support the board

09-09-2007, 03:44 AM	#11
bad6772 Official Site Guitar Shredder Join Date: May 2006 Location: Oz Posts: 3,955	Re: What did you accomplish this weekend, ending 9-9-07? im painting my frame. POR 15, SAT , AND SUNDAY IM GONNA BAsE IT AND CLEAR IT.....SEEMS ALONG TIME COMING Last edited by bad6772; 09-09-2007 at 11:58 AM.

09-09-2007, 03:52 AM	#12
blukangoo Neighborhood Pickle Slinger Join Date: Jan 2007 Location: Cadolzburg, Bavaria, Germany Posts: 2,224	Re: What did you accomplish this weekend, ending 9-9-07? I got my new tires put on yesterday and took her for a little spin without any plates. That was fun after just about a year of restoration. Attached Images __________________ -------------------------------------------------- My C10 Diary Our cars: 1966 Chevrolet Chevelle 396 - TH350 1968 Chevrolet C10/CST 327 TH400/375 1969 Corvette Stingray 350 - Muncie Manual Trans 1969 Chevrolet ElCamino 350 - TH400 1970 Cutlass Supreme Convertible - 350 Rocket - TH350 1973 Camaro LT - New Engine Done - TH350 1973 Corvette Convertible 454 - TH400

09-09-2007, 08:31 AM	#13
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 47,083	Re: What did you accomplish this weekend, ending 9-9-07? Cleaned and painted the underside of my bed and remounted it. Patched my core support and have it mostly repainted. Found and cleaned my fan shroud, as well as cleaning the undercoating off the passenger inner fender so I can patch it later. Not sure how much I'll get done today. http://67-72chevytrucks.com/vboard/s...=221437&page=4 __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!

09-09-2007, 08:45 AM	#14
72GMCburban Registered User Join Date: Oct 2006 Location: Fort Worth Posts: 306	Re: What did you accomplish this weekend, ending 9-9-07? Omni: NICE!! wish I had that much(clean) garage space. Bluk: Love the raised white letter tires. Glad to see I am not alone, many of us seem to have non truck chores this weekend. Mine? The wifes Mazda had a check engine light come on, replaced the bank 1 O2 sensor and cleaned and re-gapped her plugs, Check light is now gone, so now she's happy so the whole house gets to be happy now too LOL __________________ --Mike http://rides.webshots.com/album/551997543JkYiXF Last edited by 72GMCburban; 09-09-2007 at 11:57 AM.

09-09-2007, 08:56 AM	#15
71see10 Worthless Join Date: Jun 2006 Location: LaFayette, GA Posts: 199	Re: What did you accomplish this weekend, ending 9-9-07? Started prefitting wood in 72bluz (chuckles) truck and drilling all the hole!! Also went truck hunting late last night,with some help from a spot light we found one,it almost got away.Wonder who this belongs too!!!!!!



Register or Log In To remove these advertisements.

09-09-2007, 11:15 AM	#16
glock35ipsc Next project: 1970 K10 Join Date: Feb 2004 Location: Fort Collins, Colo 80524 Posts: 6,685	Re: What did you accomplish this weekend, ending 9-9-07? Got the shop cleaned up yesterday, found some tools I forgot I had! Worked on the tractor a little bit too, now the hydraulic steering works like it's suppose to. Today, the shed gets cleaned out and organized so that I can get some of the larger truck parts out of the shop and into the shed. Then I'll move the rolling chassis out of the big shop down to the small shop. Then I can have more room to start squirting primer! __________________ *Bob* 1970 Chevy K10 LWB "Goldie" 350/TH350 *next project!!* 1981 Chevy C10 LWB 355/TH350 - My son's truck LS SWAP FORUM! Tons of LS swap info here! PLEASE CLICK HERE TO SUPPORT THE GREATEST BOARD ON THE NET! CLICK HERE FOR THE FAQ INDEX by KRUE

09-09-2007, 11:30 AM	#17
Big D Registered User Join Date: Apr 2005 Location: Dunlap, IL Posts: 308	Re: What did you accomplish this weekend, ending 9-9-07? Not much the truck this weekend. I'm coming to the realization that winter is coming and I havent got any of my house projects finished. So I spent all day Saturday painting and caulking. I did get the front clip on the 72 Friday night. Once I get everthing aligned I can finish welding in the cab corners and rockers. Hopefuly I can pickup the new heads this week and get the motor running again. Its getting old pushing it in and out of the garage. __________________ 68 GMC 64 1/2 Mustang convert A bachelor's life is no life for a single man." - Samuel Goldwyn

09-09-2007, 01:14 PM	#18
jd4300fel Registered User Join Date: Aug 2002 Location: wheatland, Ca Posts: 427	Re: What did you accomplish this weekend, ending 9-9-07? I was able to put the my custom longhorn bed back on the truck. I made my own longhorn from two beds, two metal floors. I also added fuel filler doors. I painted the bed rustoleum black hammer finish. Attached Images __________________ Mike K Friend of Bill W

09-09-2007, 02:24 PM	#19
Kurt L Senior Member Join Date: May 2003 Location: ne florida Posts: 2,665	Re: What did you accomplish this weekend, ending 9-9-07? well i changed the oil in my 88 burb saturday,shot some grease to it.i haven't done muh to it since i bought bout a yr ago.so i gave it some TLC.took off the cowl cleaned all that out [leaves, sticks].re hooked up the windshield washer lines on the wipers,cleaned it all out.took and was checking out my air cleaner and the flap for the heat sensor was closed so i fixed that turned my air cleaner cover up side down,now it's getting all the air it needs.

09-09-2007, 04:42 PM	#20
woodridge Senior Member Join Date: Feb 2005 Location: Maynardville, Tn Posts: 3,030	Re: What did you accomplish this weekend, ending 9-9-07? Retired from the Air National Guard. __________________ SEMA Network- Protect our Hobby! 71 C30 in pieces, starting to come together. Click here for A Place For Tennessee Truck Enthusiest To Meet

09-09-2007, 04:57 PM	#21
cory321 Problem Child Join Date: Sep 2005 Location: Kettering Ohio Posts: 1,248	Re: What did you accomplish this weekend, ending 9-9-07? Bought stuff to keep me occupied next weekend __________________ 1972 gmc sierra grande 350/350 a/c soon`to get a new 350 I Survived Norwood

09-09-2007, 05:05 PM	#22
Texasdeere Registered User Join Date: Sep 2006 Location: League City, Texas Posts: 732	Re: What did you accomplish this weekend, ending 9-9-07? The interior still looks like a$$ but I like this new wheel. Kind of matches the door pannel. Attached Images

09-09-2007, 07:21 PM	#23
68 Stepside huh? Join Date: May 2000 Location: Washington, Illinois Posts: 5,692	Re: What did you accomplish this weekend, ending 9-9-07? I got the painting done...just rattle-can, and a lot of touch up, so don't mind the "stripes" I cleaned up the rust as good as I could, and re-sprayed the flat black so it has a little "protection". I also tracked down some wiring gremlins and got them taken care of. Attached Images __________________ Someday when I'm lonely, Wishing you weren't so far away, Then I will remember Things we said today. RIP El Jay

09-09-2007, 07:30 PM	#24
kxnomore Registered User Join Date: Dec 2006 Location: CA Posts: 331	Re: What did you accomplish this weekend, ending 9-9-07? Finally got around to installing a new Pinion seal in my front axle. That went great so I also pulled the rear cover and cleaned it up and repainted it and got it back on with too much black silicone, but the truck should be leak free now! Plus went Junkyard hunting and found a couple of nice parts. Attached Images

09-09-2007, 05:03 PM	#25
RANDY COX Registered User Join Date: Mar 2001 Location: RADFORD, VA Posts: 2,651	Re: What did you accomplish this weekend, ending 9-9-07? I too am TIRED Worked all week on my car 48 fleetline sanding and body work and then helped my bro sand a pickup truck and my finger tips are so smooooth.Cain't wait to get done,yea right.MSGROSS I feel for ya buddy with the wall paper,Iv'e had my share with that stuff. __________________ 1964 BBC 402 4x4

Register or Log In To remove these advertisements.