Truck is finally getting cut up. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

desert-rat · 11-15-2018, 08:43 PM

Replacing driver floor foot area (passenger side floor is good), both inner and outer rocker panels. Next will be the drip rails, cab corners, and found out also need to replace driver side lower pillar. I'll update/add pics as cutting is done.

desert-rat · 11-15-2018, 08:44 PM

Somebody please rotate this pics. Thanks.

**AussieinNC** · 11-15-2018, 10:42 PM

Here ya go

Lanman1972 · 11-16-2018, 10:59 AM

If you haven't already, add some bracing before cutting out the floor and pillars. Test fit the doors and check the gaps before welding! Read through lots of build threads.

Resto-Rand · 11-16-2018, 10:22 PM

I'm always amazed by the ballsy amount of work some of us take on. It all takes talent I don't have. I had my rockers replaced 10 years ago by a young wizard in the neighborhood.

Red71gmc · 11-16-2018, 10:27 PM

Where is your coat and the snow/ice on the ground lol. I definitely live in the wrong place.

11-15-2018, 08:43 PM	#1
desert-rat Registered User Join Date: Jan 2013 Location: 3,018 feet above the SoCal/Mojave Desert region. Posts: 371	Truck is finally getting cut up. Replacing driver floor foot area (passenger side floor is good), both inner and outer rocker panels. Next will be the drip rails, cab corners, and found out also need to replace driver side lower pillar. I'll update/add pics as cutting is done. Attached Images

11-15-2018, 08:44 PM	#2
desert-rat Registered User Join Date: Jan 2013 Location: 3,018 feet above the SoCal/Mojave Desert region. Posts: 371	Re: Truck is finally getting cut up. Somebody please rotate this pics. Thanks.

11-15-2018, 10:42 PM	#3
AussieinNC Moderator Join Date: Jun 2017 Location: Cherryville, NC Posts: 2,204	Re: Truck is finally getting cut up. Here ya go Attached Images __________________ Family and country before all others... 2006 Chevy Silverado (Daily Driver) 2012 Chevy Equinox

11-16-2018, 10:59 AM	#4
Lanman1972 Registered User Join Date: Dec 2013 Location: Omaha NE Posts: 620	Re: Truck is finally getting cut up. If you haven't already, add some bracing before cutting out the floor and pillars. Test fit the doors and check the gaps before welding! Read through lots of build threads. __________________ 1972 C10 Custom Deluxe LWB, 402/400, PS, PB, A/C, Highlander, Hugger / White 1971 C10 Cheyenne LWB (SWB), 350/350, PS, PB, A/C, Dark Olive / White.

11-16-2018, 10:22 PM	#5
Resto-Rand Registered User Join Date: Jul 2012 Location: Bay Area, Ca Posts: 108	Re: Truck is finally getting cut up. I'm always amazed by the ballsy amount of work some of us take on. It all takes talent I don't have. I had my rockers replaced 10 years ago by a young wizard in the neighborhood. __________________ 1971 C-10 307 3OTT

11-16-2018, 10:27 PM	#6
Red71gmc Registered User Join Date: Jan 2017 Location: Brookston, In Posts: 482	Re: Truck is finally getting cut up. Where is your coat and the snow/ice on the ground lol. I definitely live in the wrong place.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.