Some BBC stuff for sale - The 1947 - Present Chevrolet & GMC Truck Message Board Network

ofnaman · 01-28-2008, 10:04 AM

I know I posted this stuff before, but I finally have the pics people have been asking for. BBC oval port intake, cast steel four barrel spreadbore - $25 plus shipping (very heavy). Exhaust manifolds, cast steel - $25 plus shipping. Fan shroud - $20 plus shipping. Distributor and coil (newer), and bracket - $20 plus shipping. Stock fan and fan spacer (not pictured) - $15 plus shipping. If my prices seem off make offer, just need to get rid of the stuff. Please PM me if interested. Thanks

**too much stuff** · 01-28-2008, 10:17 AM

How much to ship the manifolds, and are there any cracks in them? Shipping to 55744 MN. Thanks, Eric

ofnaman · 01-28-2008, 10:19 AM

Intake and exhaust or just exhaust?

Quote:

Originally Posted by too much stuff

How much to ship the manifolds, and are there any cracks in them? Shipping to 55744 MN. Thanks, Eric

*1972Ryan* · 01-28-2008, 10:39 AM

put me in line on the manifolds.

**PICKMUP** · 01-28-2008, 10:48 AM

Put me 1st in line for the fan shroud IF there are no cracks/damage. Shipping to 98506??? Thanks, Frank

ofnaman · 01-28-2008, 11:04 AM

No cracks, but I did put a little hole in the top where it meets the radiator to run wires for my fan. its about a 1/2 in. thanks

Quote:

Originally Posted by PICKMUP

Put me 1st in line for the fan shroud IF there are no cracks/damage. Shipping to 98506??? Thanks, Frank

Down south truckin · 01-28-2008, 12:37 PM

I'd like to get in line for the shroud as well as the manifolds pending condition and shipping thanks Mike

ofnaman · 01-28-2008, 01:10 PM

Intake and exhaust manifolds are in good condition, no cracks. The exhaust manifolds need new studs, but nothing else except a good cleaning.

ofnaman · 01-28-2008, 01:14 PM

Also selling this '72 4wd if interested

70rs/ss · 01-29-2008, 02:45 AM

Quote:

Originally Posted by ofnaman

Also selling this '72 4wd if interested

How much for this? It's a nitro (gas car) right?

Mike

ofnaman · 01-29-2008, 03:05 AM

It's a 1/8 scale OFNA monster pirate 4wd monster truck. It is nitro powered. It has a new .27 super tiger engine, XTM pipe, new Proline 17mm Maxx wheels, new proline crimefighter tires, new metal center diff gear, JR racing XR2i am radio with a JR throttle servo (std duty), and a JR metal gear high torque steering servo. Comes with a trinity 5 cell reciever pack with charger, and a hangar 9 long reach glow igniter and charger. Also has newer ofna threaded rear shocks, and upgraded front shocks (older). Engine has about 15 tanks of fuel ran through it (all were 33% traxxas top fuel, engine was broken in correctly). Body is a proline 72 chevy (really beat up). This thing is fast! I have it for sell on Craigslist for $450, but I'd sell it here for $300 plus shipping.

Quote:

Originally Posted by 70rs/ss

How much for this? It's a nitro (gas car) right?

Mike

**PICKMUP** · 01-28-2008, 04:55 PM

I will have to pass on the shroud....thanks for answer.

CE20934 · 01-31-2008, 10:30 AM

If the shroud's still available, I'd like to step in line for it.

ofnaman · 02-04-2008, 04:41 AM

Sold the shroud, thanks down south truckin. Some people are asking for the exhaust manifold part #'s. Here they are (can't quite make out some #'s). 3914618, 398(9?)980(9?). Thanks

72 Cheyenne402 · 02-04-2008, 05:28 AM

How about the manifolds are they sold yet?

ofnaman · 02-04-2008, 05:31 AM

Not yet, but too much stuff is interested and he gets first choice. Thanks

Quote:

Originally Posted by 72 Cheyenne402

How about the manifolds are they sold yet?

**too much stuff** · 02-06-2008, 08:49 AM

Thanks for the info, but i am going to pass on the exhaust manifolds. Eric

stope4 · 03-08-2008, 08:14 AM

If the exhaust manifolds are still available I'd like them. How much for shipping to 77040. Also, I'd like the coil bracket if you are willing to sell. I don't need the distributor or coil. Let me know price.

BurnoutNova · 03-08-2008, 09:36 AM

i'll take the exaust manifolds if they get to me, my 402 has some cracked ones

*1972Ryan* · 03-21-2008, 04:41 AM

Paid for the manifolds and haven't got them, its been way over a month and no word. Whats going on?

ofnaman · 03-21-2008, 07:37 AM

Just sent a pm. Sorry for the delay.

*1972Ryan* · 03-31-2008, 04:15 AM

Still no manifolds or refund.....whats going on?

ofnaman · 03-31-2008, 10:00 AM

Just sent you a refund, and you should be recieving the manifolds any time now, I sent them about three weeks ago. Keep the money, I would like you to be happy, and not harbor any negative feelings towards me. Again I am sorry for the delay, you can thank usps for that (I should have shipped ups).

01-28-2008, 10:04 AM	#1
ofnaman Registered User Join Date: Aug 2007 Location: reno Posts: 397	Some BBC stuff for sale I know I posted this stuff before, but I finally have the pics people have been asking for. BBC oval port intake, cast steel four barrel spreadbore - $25 plus shipping (very heavy). Exhaust manifolds, cast steel - $25 plus shipping. Fan shroud - $20 plus shipping. Distributor and coil (newer), and bracket - $20 plus shipping. Stock fan and fan spacer (not pictured) - $15 plus shipping. If my prices seem off make offer, just need to get rid of the stuff. Please PM me if interested. Thanks Attached Images __________________ A sweet 2000 Deville.....

01-28-2008, 10:17 AM	#2
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,764	Re: Some BBC stuff for sale How much to ship the manifolds, and are there any cracks in them? Shipping to 55744 MN. Thanks, Eric __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

01-28-2008, 10:39 AM	#4
1972Ryan Account Suspended Join Date: Mar 2006 Location: Weaverville, NC Posts: 718	Re: Some BBC stuff for sale put me in line on the manifolds.

01-28-2008, 10:48 AM	#5
PICKMUP "Trucks with Class" Join Date: Jul 2000 Location: OLYMPIA, WA, USA Posts: 8,139	Re: Some BBC stuff for sale Put me 1st in line for the fan shroud IF there are no cracks/damage. Shipping to 98506??? Thanks, Frank

01-28-2008, 12:37 PM	#7
Down south truckin Senior Member Join Date: Feb 2006 Location: Lilburn Georgia Posts: 1,240	Re: Some BBC stuff for sale I'd like to get in line for the shroud as well as the manifolds pending condition and shipping thanks Mike

01-28-2008, 01:10 PM	#8
ofnaman Registered User Join Date: Aug 2007 Location: reno Posts: 397	Re: Some BBC stuff for sale Intake and exhaust manifolds are in good condition, no cracks. The exhaust manifolds need new studs, but nothing else except a good cleaning. __________________ A sweet 2000 Deville.....

01-28-2008, 01:14 PM	#9
ofnaman Registered User Join Date: Aug 2007 Location: reno Posts: 397	Re: Some BBC stuff for sale Also selling this '72 4wd if interested Attached Images __________________ A sweet 2000 Deville.....

01-28-2008, 04:55 PM	#12
PICKMUP "Trucks with Class" Join Date: Jul 2000 Location: OLYMPIA, WA, USA Posts: 8,139	Re: Some BBC stuff for sale I will have to pass on the shroud....thanks for answer.

01-31-2008, 10:30 AM	#13
CE20934 Senior Member Join Date: Apr 2002 Location: Help! I'm in an office park with its own network of freeways! Posts: 470	Re: Some BBC stuff for sale If the shroud's still available, I'd like to step in line for it. __________________ '67 C20--427 tall deck/SM420, 4.10 HO52 (Michigan has not been kind to the Old Man) '95 Caprice--355 LT1/T56/3.42 8.5" 10-bolt (daily driver, almost 300k on the chassis) '07 Outback--wife's car. 125k & counting. No head gasket or transmission issues yet. fingers crossed

02-04-2008, 04:41 AM	#14
ofnaman Registered User Join Date: Aug 2007 Location: reno Posts: 397	Re: Some BBC stuff for sale Sold the shroud, thanks down south truckin. Some people are asking for the exhaust manifold part #'s. Here they are (can't quite make out some #'s). 3914618, 398(9?)980(9?). Thanks __________________ A sweet 2000 Deville.....

02-04-2008, 05:28 AM	#15
72 Cheyenne402 Registered User Join Date: Feb 2005 Location: Texas Posts: 581	Re: Some BBC stuff for sale How about the manifolds are they sold yet? __________________ 1972 Cheyenne 402 LWB 2005 Silverado X-Cab 5.3L 2004 John Deere L120 20HP B&S

02-06-2008, 08:49 AM	#17
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,764	Re: Some BBC stuff for sale Thanks for the info, but i am going to pass on the exhaust manifolds. Eric __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

03-08-2008, 08:14 AM	#18
stope4 Registered User Join Date: Jan 2006 Location: Houston Posts: 434	Re: Some BBC stuff for sale If the exhaust manifolds are still available I'd like them. How much for shipping to 77040. Also, I'd like the coil bracket if you are willing to sell. I don't need the distributor or coil. Let me know price.

03-08-2008, 09:36 AM	#19
BurnoutNova Registered User Join Date: Mar 2004 Location: CA Posts: 2,057	Re: Some BBC stuff for sale i'll take the exaust manifolds if they get to me, my 402 has some cracked ones

03-21-2008, 04:41 AM	#20
1972Ryan Account Suspended Join Date: Mar 2006 Location: Weaverville, NC Posts: 718	Re: Some BBC stuff for sale Paid for the manifolds and haven't got them, its been way over a month and no word. Whats going on?



Register or Log In To remove these advertisements.

03-21-2008, 07:37 AM	#21
ofnaman Registered User Join Date: Aug 2007 Location: reno Posts: 397	Re: Some BBC stuff for sale Just sent a pm. Sorry for the delay. __________________ A sweet 2000 Deville.....

03-31-2008, 04:15 AM	#22
1972Ryan Account Suspended Join Date: Mar 2006 Location: Weaverville, NC Posts: 718	Re: Some BBC stuff for sale Still no manifolds or refund.....whats going on?

03-31-2008, 10:00 AM	#23
ofnaman Registered User Join Date: Aug 2007 Location: reno Posts: 397	Re: Some BBC stuff for sale Just sent you a refund, and you should be recieving the manifolds any time now, I sent them about three weeks ago. Keep the money, I would like you to be happy, and not harbor any negative feelings towards me. Again I am sorry for the delay, you can thank usps for that (I should have shipped ups). __________________ A sweet 2000 Deville.....

Register or Log In To remove these advertisements.