Wiring Harness Info - The 1947 - Present Chevrolet & GMC Truck Message Board Network

OhioDan · 11-02-2007, 04:16 PM

Just wanted to pass along to everyone about an expeience I had today. I purchased most, if not all of my wiring harnesses from GMC Paul. They are made by an outfit called M&H Electric Fabricators, out of California. I had a problem with the section you could install for trailer lights. When you'd install it, all the rear lights went haywire. Contacted GMC Paul, and he said to contact M&H directly. I might add at this time, that I was 8 months past their 1 year warranty. Sent them an email and explaining that I was just getting around to installing it and the problems I was having. He asked if I had my receipt, and could I send them a copy? Just received notice today, that a new harness is on it's way "free of charge". That's some folks who stand by their product. Recommend M&H wiring harness to everyone.
Web address is:www.wiringharness.com
Email is: sparky@wiringharness.com

Sorry this is so long, just wanted to pass it on.

Andy4639 · 11-02-2007, 07:42 PM

Nice to know some people still stand behind the product no matter how long you've had it.

Select · 11-02-2007, 09:47 PM

They are the ones who made the harnesses for my 68 that I haven't gotten around to installing. I only got the engine, headlight and under dash harnesses so far. I hope things go well with the install. Was there and headaches putting yours in besides the trailer light one?

OhioDan · 11-03-2007, 03:30 AM

As far as installing it, no. The biggest hassle was putting it all in loom so it would look good.

72armyswbtruck · 11-03-2007, 03:48 AM

Good to see they stand by there product.

BobbyK · 11-03-2007, 08:13 AM

M+H=quality product!
I rewired my whole Blazer with their harnesses.

Only piece NOT theirs was the trailer harness.I picked that up from one of the trailer equipment co.'s...one of those plug and play one's

11-02-2007, 04:16 PM	#1
OhioDan Registered User Join Date: Apr 2002 Location: New Carlisle, Ohio,USA Posts: 1,404	Wiring Harness Info Just wanted to pass along to everyone about an expeience I had today. I purchased most, if not all of my wiring harnesses from GMC Paul. They are made by an outfit called M&H Electric Fabricators, out of California. I had a problem with the section you could install for trailer lights. When you'd install it, all the rear lights went haywire. Contacted GMC Paul, and he said to contact M&H directly. I might add at this time, that I was 8 months past their 1 year warranty. Sent them an email and explaining that I was just getting around to installing it and the problems I was having. He asked if I had my receipt, and could I send them a copy? Just received notice today, that a new harness is on it's way "free of charge". That's some folks who stand by their product. Recommend M&H wiring harness to everyone. Web address is:www.wiringharness.com Email is: sparky@wiringharness.com Sorry this is so long, just wanted to pass it on. __________________ LIFE AIN'T EASY WHEN YER FAT AND GREASY! GMC= Got More Class! 1970 GMC LWB, Fleetside, 350/4spd, Flowmaster "40's", 2002 GMC 16" Rallies, cowl hood,and added a bunch of options that weren't there when I started.

11-02-2007, 07:42 PM	#2
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,945	Re: Wiring Harness Info Nice to know some people still stand behind the product no matter how long you've had it. __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

11-02-2007, 09:47 PM	#3
Select Friday's Toy Join Date: Nov 2006 Location: Ovilla, TX Posts: 574	Re: Wiring Harness Info They are the ones who made the harnesses for my 68 that I haven't gotten around to installing. I only got the engine, headlight and under dash harnesses so far. I hope things go well with the install. Was there and headaches putting yours in besides the trailer light one? __________________ 68 C10, SWB Fleetside with a 454, Turbo 400 and 4.11 posi....Exxon/Mobil loves me. 2009 Jeep Rubicon 2011 Powerstroke FX4 (totaled) 71 C10, SWB Fleet with factory tilt 72 LWB C10, 350 700R4 with factory tilt

11-03-2007, 03:30 AM	#4
OhioDan Registered User Join Date: Apr 2002 Location: New Carlisle, Ohio,USA Posts: 1,404	Re: Wiring Harness Info As far as installing it, no. The biggest hassle was putting it all in loom so it would look good. __________________ LIFE AIN'T EASY WHEN YER FAT AND GREASY! GMC= Got More Class! 1970 GMC LWB, Fleetside, 350/4spd, Flowmaster "40's", 2002 GMC 16" Rallies, cowl hood,and added a bunch of options that weren't there when I started.

11-03-2007, 03:48 AM	#5
72armyswbtruck Registered User Join Date: Feb 2004 Location: Idaho Posts: 4,034	Re: Wiring Harness Info Good to see they stand by there product. __________________ "Remember, They can Kill You, but they can't eat You, That's against the law!!!!!!!!!"

11-03-2007, 08:13 AM	#6
BobbyK Registered User Join Date: May 2000 Location: Petrolia,Ontario,Canada but working in Port Huron,Mi. Posts: 1,771	Re: Wiring Harness Info M+H=quality product! I rewired my whole Blazer with their harnesses. Only piece NOT theirs was the trailer harness.I picked that up from one of the trailer equipment co.'s...one of those plug and play one's __________________ 71 blazer,350SBC,approx.375HP,700R4,factory GM TPI.Dual electric fans,33x12.5x15 ATR on stock suspension. Petrolia,Ontario,Canada but working in Port Huron,MI. See ALL my Blazer pic's HERE



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.