Not mine but someone needs this!!! K20 $3500 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Scottcoda · 01-12-2014, 10:52 AM

I would scoop this truck up in a second if I was not already strapped for cash with my own truck
http://newhaven.craigslist.org/cto/4276912800.html

In The Ten Ring · 01-12-2014, 11:27 AM

That does look like a good one!

jeh · 01-12-2014, 11:33 AM

67/68 hood and 69/70 grill ??????

evan396 · 01-12-2014, 12:37 PM

Hello everyone, I just emailed this guy about his truck. Asked if I can come over and look at it.I will have to wait and see if he calls. In the meantime could you guys give me any advice on what to look for on this truck. Thanks evan

evan396 · 01-13-2014, 09:22 PM

Just went to look at this one. First off no (k) in the vin #. It should have a (K) right? Glove box door was from another truck, had a (K) in that vin# The bed has a plywood floor, even the top rails were rusted through. Home made rockers. Floors are rotted out , under the carpet. Can also see a lot of bad body work (bondo). On the plus side, the front clip was in good shape, He also said the drive train was in good shape and the four wheel drive worked great.S0 I guess I would like to ask you guy's opinion on this truck. Thanks Evan

**LockDoc** · 01-13-2014, 09:37 PM

Quote:

Originally Posted by evan396

Just went to look at this one. First off no (k) in the vin #. It should have a (K) right? Glove box door was from another truck, had a (K) in that vin# The bed has a plywood floor, even the top rails were rusted through. Home made rockers. Floors are rotted out , under the carpet. Can also see a lot of bad body work (bondo). On the plus side, the front clip was in good shape, He also said the drive train was in good shape and the four wheel drive worked great.S0 I guess I would like to ask you guy's opinion on this truck. Thanks Evan

I think I would keep looking too many questionable areas that may need attention...

Just my 2¢ Worth.

LockDoc

myyamr7 · 01-13-2014, 09:46 PM

Quote:

Originally Posted by evan396

Just went to look at this one. First off no (k) in the vin #. It should have a (K) right? Glove box door was from another truck, had a (K) in that vin# The bed has a plywood floor, even the top rails were rusted through. Home made rockers. Floors are rotted out , under the carpet. Can also see a lot of bad body work (bondo). On the plus side, the front clip was in good shape, He also said the drive train was in good shape and the four wheel drive worked great.S0 I guess I would like to ask you guy's opinion on this truck. Thanks Evan

Funny, my nephew sent me a link to this add and asked me to go with him to look at it on Wednesday with him. Thanks for posting, we won't bother wasting time now as he was looking for a project/restoration.
Still sounds like an OK deal for a northeast truck IMHO if you have the time, money and skills to do the work yourself

midniteblues · 01-13-2014, 09:31 PM

Quote:

Originally Posted by jeh

67/68 hood and 69/70 grill ??????

i'll second that?????

most northeast trucks need that much work,

yfs200p · 01-13-2014, 10:53 PM

Quote:

Originally Posted by jeh

67/68 hood and 69/70 grill ??????

Good eye, I was trying to put my finger on why the front of that truck looked weird.

I wonder if he'd be willing to trade that old rotted truck for an old rotted jeep? I'd make that trade every day.

71swb4x4 · 01-13-2014, 09:34 PM

What are you looking for? If you are looking for a restoration project you need to keep looking, the rust will cost you a lot of cash. If you are looking for a plow truck to keep your driveway open then it may be an OK truck, but at about 1/2 the price.

evan396 · 01-13-2014, 10:26 PM

Thanks everyone. and yes 71swb4x4 I am looking for a restoration project. I think I would have tried to get him to go lower on his price if the truck was a real k20. I think I would feel better if the vin# had a (K) in it. I will keep looking around. And yes lockdoc, two cents is worth more than no cents. I hope I did save you a trip myyamr7, but don't take my word for it. you and your nephew might see it as a truck you could restore. Anyway thanks for the input Evan

01-12-2014, 10:52 AM	#1
Scottcoda Registered User Join Date: Jun 2013 Location: Brant Lake New York Posts: 224	Not mine but someone needs this!!! K20 $3500 I would scoop this truck up in a second if I was not already strapped for cash with my own truck http://newhaven.craigslist.org/cto/4276912800.html __________________ 68 GMC 2500 stepside LWB 250CI

01-12-2014, 11:27 AM	#2
In The Ten Ring Registered User Join Date: Jun 2013 Location: West Virginia Posts: 6,421	Re: Not mine but someone needs this!!! K20 $3500 That does look like a good one!

01-12-2014, 11:33 AM	#3
jeh Registered User Join Date: Jul 2011 Location: sutton WV Posts: 1,822	Re: Not mine but someone needs this!!! K20 $3500 67/68 hood and 69/70 grill ?????? __________________ Jason '70 C-10 short fleet 427BB TH400 (SOLD) '10 Ford F 350 '13 Ford RAPTOR 6.2 MY BUILD THREAD http://www.67-72chevytrucks.com/vboa...d.php?t=612623

01-12-2014, 12:37 PM	#4
evan396 Registered User Join Date: Dec 2013 Location: clinton ct Posts: 212	Re: Not mine but someone needs this!!! K20 $3500 Hello everyone, I just emailed this guy about his truck. Asked if I can come over and look at it.I will have to wait and see if he calls. In the meantime could you guys give me any advice on what to look for on this truck. Thanks evan

01-13-2014, 09:22 PM	#5
evan396 Registered User Join Date: Dec 2013 Location: clinton ct Posts: 212	Re: Not mine but someone needs this!!! K20 $3500 Just went to look at this one. First off no (k) in the vin #. It should have a (K) right? Glove box door was from another truck, had a (K) in that vin# The bed has a plywood floor, even the top rails were rusted through. Home made rockers. Floors are rotted out , under the carpet. Can also see a lot of bad body work (bondo). On the plus side, the front clip was in good shape, He also said the drive train was in good shape and the four wheel drive worked great.S0 I guess I would like to ask you guy's opinion on this truck. Thanks Evan

01-13-2014, 09:34 PM	#10
71swb4x4 Senior Member Join Date: Nov 2003 Location: Brookings, SD Posts: 10,497	Re: Not mine but someone needs this!!! K20 $3500 What are you looking for? If you are looking for a restoration project you need to keep looking, the rust will cost you a lot of cash. If you are looking for a plow truck to keep your driveway open then it may be an OK truck, but at about 1/2 the price. __________________ Some people are like slinkies, they aren't good for anything, but you can't help but smile when you see one tumble down the stairs.

01-13-2014, 10:26 PM	#11
evan396 Registered User Join Date: Dec 2013 Location: clinton ct Posts: 212	Re: Not mine but someone needs this!!! K20 $3500 Thanks everyone. and yes 71swb4x4 I am looking for a restoration project. I think I would have tried to get him to go lower on his price if the truck was a real k20. I think I would feel better if the vin# had a (K) in it. I will keep looking around. And yes lockdoc, two cents is worth more than no cents. I hope I did save you a trip myyamr7, but don't take my word for it. you and your nephew might see it as a truck you could restore. Anyway thanks for the input Evan



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.