The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1960 - 1966 Chevrolet & GMC Pickups Message Board > projects and builds

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 02-13-2011, 11:32 AM   #1
chevyrestoguy
Registered User
 
chevyrestoguy's Avatar
 
Join Date: Mar 2005
Location: apple valley, ca
Posts: 2,670
Project '64

I have owned Chevy trucks for years, and have had most all of the styles except oddly enough, my favorite one, the 60-66 version. I've seen some nice ones but it always seemed like there was something around the house that needed my attention (and money) more, so I always passed. I've always been keeping an eye open for one, but because I have so many other projects, it had to be cheap and close by. I'm always looking through Craigslist for parts, and always look through the local area for Chevy trucks. Well, last Thursday, I stumbled on an ad that read, "1964-to1966 Chevy truck", and it was 8 miles from house and it was listed at $300. Needless to say, my Spidey Sense was tingling, and I had to go and look at it.

The owner was a guy going to school full-time who had no money, and the truck was constantly being bounced from friend's house to friend's house because he had no place to keep it. It was at a cousin's house who was going to be evicted, so the seller was desperate. While I was looking at the truck, HE was knocking the price down. I stayed quiet and cordial, and finally he got down to $200 and I just reached over and shook his hand and said I would take it. He was a nice kid, and I wasn't going to let him whittle down his profit anymore.

The truck wound up being a 1964, 3/4 ton. The engine is missing, the 4-speed trans is still in it, and the interior is complete. The body has definately seen better days, but the thing that sealed the deal was the fact that it had factory in-dash air and tinted windows. I've never seen in-dash air on a '64 because I was always under the impression that the in-dash A/C option didn't come out until '65. This thing has all of the A/C-specific holes in the firewall so that leads me to believe that it's all original. I'm going to pick it up in a few hours, and after I get it home, I'm going to do some more investigation because the A/C has really got my interest. Anyway, enough of the BS. Here's the pictures:







It's also got 3 tanks and they are all still in the truck. For starters, it needs a new grille, marker lights, hood hinges, rear window, taillight lenses. It's also missing the A/C stuff on the firewall on the engine side.

I have a '79 Suburban (454, th400, disc brakes, power steering, A/C) that is going to be the donor to get this truck back on the road. I want to build a cool Home Depot hauler and parts chaser. I am naming this truck Project Cheapskate because I want to spend as little as possible. I plan on hitting the swapmeets, wrecking yards, and Craigslist for parts, and I am going to utilize a lot of parts I already have. I am going to sell off or trade a lot of my excess parts to buy what I need, and trade work with friends to get anything else. This is going to be fun.........
__________________
Check out my latest endeavor:
https://roundsixpod.com

My build threads:
'55 Chevy: http://67-72chevytrucks.com/vboard/s...d.php?t=247512

'64 C-20: http://67-72chevytrucks.com/vboard/s...d.php?t=446527

Last edited by chevyrestoguy; 12-30-2012 at 12:24 PM.
chevyrestoguy is offline   Reply With Quote
Old 02-13-2011, 07:01 PM   #2
Fat Mike
Registered User
 
Fat Mike's Avatar
 
Join Date: Sep 2009
Location: Albuquerque, NM
Posts: 540
Re: Project '64 Cheapskate

That is a nice looking starter truck. With the amount of knowledge you have you should be able to build a very nice truck on a small budget. Good luck and keep posting pictures.
Fat Mike is offline   Reply With Quote
Old 02-13-2011, 09:36 PM   #3
chevyrestoguy
Registered User
 
chevyrestoguy's Avatar
 
Join Date: Mar 2005
Location: apple valley, ca
Posts: 2,670
Re: Project '64 Cheapskate

Thanks, Mike!
__________________
Check out my latest endeavor:
https://roundsixpod.com

My build threads:
'55 Chevy: http://67-72chevytrucks.com/vboard/s...d.php?t=247512

'64 C-20: http://67-72chevytrucks.com/vboard/s...d.php?t=446527
chevyrestoguy is offline   Reply With Quote
Old 02-13-2011, 10:01 PM   #4
CAL 58 GMC
Senior Member
 
CAL 58 GMC's Avatar
 
Join Date: Jun 2005
Location: Clovis Ca.
Posts: 3,311
Re: Project '64 Cheapskate

Nice find and for the price you can't go wrong. I have only seen a few factory AC 60/66 trucks before. Considering how many of these trucks don't have factory air it's a rather rare opition back in the day and your looks like it is the orginal. So what's your plans?

Last edited by CAL 58 GMC; 02-13-2011 at 10:03 PM.
CAL 58 GMC is offline   Reply With Quote
Old 02-15-2011, 11:51 AM   #5
chevyrestoguy
Registered User
 
chevyrestoguy's Avatar
 
Join Date: Mar 2005
Location: apple valley, ca
Posts: 2,670
Re: Project '64 Cheapskate

My plans are to use the '79 Suburban as the donor (454/th400/power steering/entire front suspension, brakes and hard lines, and anything else I can use). I am also going to find the missing pieces I need like marker lights, taillight housings, etc, by hitting the swapmeets, wrecking yards, and even using other people's junk items and restoring them. I'm not building a show truck. I just want to make a very solid, dependable parts chaser using all used OEM parts that are readily available.

I'll restore it in the future, but I've found over the years that the quickest way to have your project get way out of hand, over budget, and over schedule is to try to eat the elephant in one bite. Plus, the vehicles I've had the most fun with were the ones that were a little rough around the edges but had super dependable drivetrains.
__________________
Check out my latest endeavor:
https://roundsixpod.com

My build threads:
'55 Chevy: http://67-72chevytrucks.com/vboard/s...d.php?t=247512

'64 C-20: http://67-72chevytrucks.com/vboard/s...d.php?t=446527
chevyrestoguy is offline   Reply With Quote
Old 02-17-2011, 05:52 PM   #6
ChevyTruckGuy
Registered User
 
ChevyTruckGuy's Avatar
 
Join Date: Feb 2011
Location: Hesperia, Ca ( Southern California )
Posts: 184
Re: Project '64 Cheapskate

Hey your truck was a good deal. I see parts around for cheap so that shouldent be a problem. Not too much rust either...
__________________
1966 Chevy C 20 Lwb (Now a project)5.7 400hp
1996 Chevy Silverado Reg Cab Lwb (Daily Driver) 5.7
2000 Chevy S-10 Ex Cab Lowered 4/4 4.3 (For Fun)
2008 GMC Sierra Ex Cab 5.3 (once a month driver)
Wife's 74 Ranchero 500 351 Cleveland (One Owner)
My name is Mike and im in So. Cal (Hi Desert)
ChevyTruckGuy is offline   Reply With Quote
Old 02-20-2011, 12:54 AM   #7
chevyrestoguy
Registered User
 
chevyrestoguy's Avatar
 
Join Date: Mar 2005
Location: apple valley, ca
Posts: 2,670
Re: Project '64 Cheapskate

Had a good day today. Found a complete aluminum stock grille with buckets, bezels, and headlights for $90 on Craigslist and drove to Anaheim to get it. On the way back, I hit the Truck Shop in Orange and picked up a rear window and seal, and some taillight lenses.

When I got back, a buddy dropped over and said that he might have some of the other parts I need in his scrap pile, and told me he would take a look when he had time.

A very good day!
__________________
Check out my latest endeavor:
https://roundsixpod.com

My build threads:
'55 Chevy: http://67-72chevytrucks.com/vboard/s...d.php?t=247512

'64 C-20: http://67-72chevytrucks.com/vboard/s...d.php?t=446527
chevyrestoguy is offline   Reply With Quote
Old 02-20-2011, 07:57 PM   #8
wutnxt
Registered User
 
Join Date: Dec 2009
Location: vancouver b.c....is the biggest place most people would know but I am actually out in the valley 45 mins away
Posts: 2,050
Re: Project '64 Cheapskate

Nice truck looks awsome...I am just redoing a pro street 66......maybe when we get both of them done we can have a go ...chuckles. Seriously great job really like what you have going on there.
wutnxt is offline   Reply With Quote
Old 02-22-2011, 11:46 PM   #9
chevyrestoguy
Registered User
 
chevyrestoguy's Avatar
 
Join Date: Mar 2005
Location: apple valley, ca
Posts: 2,670
Re: Project '64 Cheapskate

Had to work on Sunday, and wound up checking out a wrecking yard in Lancaster that's kind of on my way home. I walked through and found nothing, but on my way out, I saw a '63 C-20 longbed in the holding area. I talked to the yard foreman about when the truck was due to hit the yard, and he said "Tuesday afternoon".

So, I went to work early to offset the time, and I split at 1pm. Went to the yard, and it wasn't out yet, so I waited like an expectant father until it came out. Once it did, I jumped on it like a rat on a cheeto. The body was pretty beat, but complete. The interior was stripped out, not much there.

I grabbed a pair of hood hinges, both aluminum headlight bezels, both front marker light assemblies, both rear taillight assemblies, driver's armrest, and a perfect tailgate w/chains and trunions for a grand total of $127.00

I plan on going back to grab the fender extensions, the upper and lower valences, and possibly the steering column (automatic).

It's still got the custom cab front windshield stainless trim and sail panels (It's a '63). Unfortunately, the steering wheel was gone.
__________________
Check out my latest endeavor:
https://roundsixpod.com

My build threads:
'55 Chevy: http://67-72chevytrucks.com/vboard/s...d.php?t=247512

'64 C-20: http://67-72chevytrucks.com/vboard/s...d.php?t=446527
chevyrestoguy is offline   Reply With Quote
Old 02-24-2011, 01:04 PM   #10
Kabwe
Certified Car Nut
 
Kabwe's Avatar
 
Join Date: Jan 2005
Location: Inglewood, California
Posts: 3,118
Re: Project '64 Cheapskate

So you are starting this sickness again huh.lol On to another project? Yeah you've got it bad my friend.lol Good luck with her, I'm sure she will be really nice when done.
Kabwe is offline   Reply With Quote
Old 02-24-2011, 03:35 PM   #11
chevyrestoguy
Registered User
 
chevyrestoguy's Avatar
 
Join Date: Mar 2005
Location: apple valley, ca
Posts: 2,670
Re: Project '64 Cheapskate

You found me, Kabwe....I'm guess I'm busted, huh? Psst..don't tell any of the guys on the 55-59 forum that Ive been two-timing them over here.

I'm still focused on the '55, but I'm going through that fun phase when you get a new project and you learn tons of cool stuff everyday. I'm building the truck that will haul the parts for the '55 around.
__________________
Check out my latest endeavor:
https://roundsixpod.com

My build threads:
'55 Chevy: http://67-72chevytrucks.com/vboard/s...d.php?t=247512

'64 C-20: http://67-72chevytrucks.com/vboard/s...d.php?t=446527
chevyrestoguy is offline   Reply With Quote
Old 02-26-2011, 10:24 PM   #12
chevyrestoguy
Registered User
 
chevyrestoguy's Avatar
 
Join Date: Mar 2005
Location: apple valley, ca
Posts: 2,670
Re: Project '64 Cheapskate

The weather was awful today, with 34 degree temps and a stiff 20mph wind, but I still got to work on the 'ol beater. I spent the last few days cleaning and detailing some of my wrecking yard parts, and today I put them on.

The first thing I did was to remove both broken hood hinges and replace them with the 2 excellent ones I bought for $9 each at Pick-A-Part. Then, I installed the front marker lights that I paid $8 each for. I buffed the lenses and straightened out the bezels and hit them with some double-o steel wool. The hood opens and closes sooo nice now.


Then I moved to the rear and installed the $51 tailgate and the $6 taillights. The girl at the counter at Pick-A-Part felt bad for me and discounted the taillights because the bezels were wasted. After about 40 minutes of hammer and dolly work and some steel wool, they look pretty decent.


I'm still working on the grille, so I wasn't able to install it yet. I pulled off one of the fender extensions and plan on doing some welding on it to fix an ugly area where the camper support struts went through it. Plenty of things to do!
__________________
Check out my latest endeavor:
https://roundsixpod.com

My build threads:
'55 Chevy: http://67-72chevytrucks.com/vboard/s...d.php?t=247512

'64 C-20: http://67-72chevytrucks.com/vboard/s...d.php?t=446527
chevyrestoguy is offline   Reply With Quote
Old 03-01-2011, 10:48 AM   #13
Corts60
Just here to tinker
 
Corts60's Avatar
 
Join Date: Jun 2008
Location: Holland, MI
Posts: 3,697
Re: Project '64 Cheapskate

Nice work man! It's nice that you found a truck this vintage in a pick a part. It is pretty rare, it seems to me, to find anything pre-'75.
Corts60 is offline   Reply With Quote
Old 03-01-2011, 02:32 PM   #14
chevyrestoguy
Registered User
 
chevyrestoguy's Avatar
 
Join Date: Mar 2005
Location: apple valley, ca
Posts: 2,670
Re: Project '64 Cheapskate

Man, that is so true. But if you've got a late-80s/early 90s GM front wheel drive car, it must be pure heaven. The secret of the self-service yards is just keep hitting them and if you're lucky, you'll get to the good parts before it becomes stripped-out carcass.

I found that '63 by pure luck. I'm going back on Friday to see what's left. Might be ugly........especially if the scavengers tried to gut the interior armed with only a cresent wrench and a claw hammer, which is very common out here.
__________________
Check out my latest endeavor:
https://roundsixpod.com

My build threads:
'55 Chevy: http://67-72chevytrucks.com/vboard/s...d.php?t=247512

'64 C-20: http://67-72chevytrucks.com/vboard/s...d.php?t=446527
chevyrestoguy is offline   Reply With Quote
Old 03-07-2011, 03:48 PM   #15
Bugeyev8
Senior Member
 
Bugeyev8's Avatar
 
Join Date: Aug 2009
Location: San Leandro, Ca 94577
Posts: 854
Re: Project '64 Cheapskate

I really like the motorcycle turn lights..lol

that truck looks better already...looks like a great truck..I am jealous it has AC...wish my 62 did

keep up the work, u got an engine for it yet ?



Quote:
Originally Posted by chevyrestoguy View Post
The weather was awful today, with 34 degree temps and a stiff 20mph wind, but I still got to work on the 'ol beater. I spent the last few days cleaning and detailing some of my wrecking yard parts, and today I put them on.

The first thing I did was to remove both broken hood hinges and replace them with the 2 excellent ones I bought for $9 each at Pick-A-Part. Then, I installed the front marker lights that I paid $8 each for. I buffed the lenses and straightened out the bezels and hit them with some double-o steel wool. The hood opens and closes sooo nice now.


Then I moved to the rear and installed the $51 tailgate and the $6 taillights. The girl at the counter at Pick-A-Part felt bad for me and discounted the taillights because the bezels were wasted. After about 40 minutes of hammer and dolly work and some steel wool, they look pretty decent.


I'm still working on the grille, so I wasn't able to install it yet. I pulled off one of the fender extensions and plan on doing some welding on it to fix an ugly area where the camper support struts went through it. Plenty of things to do!
Bugeyev8 is offline   Reply With Quote
Old 03-07-2011, 05:35 PM   #16
chevyrestoguy
Registered User
 
chevyrestoguy's Avatar
 
Join Date: Mar 2005
Location: apple valley, ca
Posts: 2,670
Re: Project '64 Cheapskate

I would gladly donate the rear motorcycle lights to your project. I've looked at those things numerous times and shook my head, but never put two and two together and figured that they were motorcycle turn signals. Knowing my luck, I'll give them away and then find out that they are ultra-rare lights worth $500.

As far as the engine, the truck with get a complete drivetrain and suspension transplant from a '79 Suburban I have stashed away. It ought to ride and drive pretty nice when it's done.
__________________
Check out my latest endeavor:
https://roundsixpod.com

My build threads:
'55 Chevy: http://67-72chevytrucks.com/vboard/s...d.php?t=247512

'64 C-20: http://67-72chevytrucks.com/vboard/s...d.php?t=446527
chevyrestoguy is offline   Reply With Quote
Old 03-05-2011, 10:19 PM   #17
nate95gsr
Registered User
 
Join Date: Aug 2010
Location: louisville, ky
Posts: 13
Re: Project '64 Cheapskate

You have way to much timne on your hands. :-)
I need to locate a project like this but with a little less damage on it b/c I am not as handy at the metal work as you are.
Do you still have the Camaro on your car lot? :-)

Nate
nate95gsr is offline   Reply With Quote
Old 03-05-2011, 10:51 PM   #18
Alan's Classic
1 thing at a time is progress.
 
Alan's Classic's Avatar
 
Join Date: Jun 2007
Location: Ball Ground GA
Posts: 5,511
Re: Project '64 Cheapskate

Tuning in for this one.
Alan's Classic is offline   Reply With Quote
Old 03-06-2011, 07:52 PM   #19
chevyrestoguy
Registered User
 
chevyrestoguy's Avatar
 
Join Date: Mar 2005
Location: apple valley, ca
Posts: 2,670
Re: Project '64 Cheapskate

nate95gsr-
You are very sneaky, so be careful, I know where you live
If the word gets out to Lynn (my wife, your sister-in-law) that I own this truck, you will never get a Christmas card again........Right now, it's Top Secret. When I get it running, I'll break the news to her and tell her that we can use it to help landscape the yard. Until then.....shhhhhhh.
__________________
Check out my latest endeavor:
https://roundsixpod.com

My build threads:
'55 Chevy: http://67-72chevytrucks.com/vboard/s...d.php?t=247512

'64 C-20: http://67-72chevytrucks.com/vboard/s...d.php?t=446527
chevyrestoguy is offline   Reply With Quote
Old 03-07-2011, 03:38 PM   #20
nate95gsr
Registered User
 
Join Date: Aug 2010
Location: louisville, ky
Posts: 13
Re: Project '64 Cheapskate

I have an idea for a truck I want to run by you soon since it seems that getting my hands on a 68-72 SWB is going to be next near impossible for the money I want to spend. I don't know if it will work or not. I will try to give you a call this weekend.
Your 55 is looking kick ass with the wheels and all of the awesome metal work on it. I showed some pics of it to a guy I work with who was amazed.
Also I will be hush hush with this truck stuff to Lynn but how much is it worth to you? j/k

Nate

Last edited by nate95gsr; 03-07-2011 at 03:40 PM.
nate95gsr is offline   Reply With Quote
Old 04-20-2011, 07:14 PM   #21
Kabwe
Certified Car Nut
 
Kabwe's Avatar
 
Join Date: Jan 2005
Location: Inglewood, California
Posts: 3,118
Re: Project '64 Cheapskate

Sorry to hear about your car accident I hope all is well. But I must tell you that you Sir will been known for now on among us 55-59 chevy truck guys as the Terrell Owens of classic trucks. Talented but not a team player.lol We have been waiting on you to finish your truck and you have abandoned us for this C20.lol

On a serious note, I hope things return to normal for you soon. Good luck buddy.

Last edited by Kabwe; 04-20-2011 at 07:21 PM.
Kabwe is offline   Reply With Quote
Old 04-21-2011, 11:11 AM   #22
chevyrestoguy
Registered User
 
chevyrestoguy's Avatar
 
Join Date: Mar 2005
Location: apple valley, ca
Posts: 2,670
Re: Project '64 Cheapskate

Terrell Owens!! That's too funny. Do I whine and complain that much???

Seriously, I haven't done anything truck related since the accident. All of the paperwork and doctor and chiropractor appointments, along with my normal crazy work schedule, takes up almost all of my time lately. I leave the house at 3:30 am in the morning and finally get home at around 6:30 pm almost every night. It's wearing me down, big time. It's frustrating because I have so many things to do, but just don't have the time or energy. That should change soon, though.

I'm getting a lot of ribbing from my local buddies, too. They are asking the same questions. I can't wait to get back on the '55 again. In the meantime, I get on this site everyday and check on everybody else's projects. It keeps me motivated until the time when I can jump back on my own stuff. The weather is too nice to be inside!

Your 55-59 project is one of those things that keeps me motivated.
__________________
Check out my latest endeavor:
https://roundsixpod.com

My build threads:
'55 Chevy: http://67-72chevytrucks.com/vboard/s...d.php?t=247512

'64 C-20: http://67-72chevytrucks.com/vboard/s...d.php?t=446527
chevyrestoguy is offline   Reply With Quote
Old 05-01-2011, 12:21 PM   #23
yukon ratrod
Registered User
 
yukon ratrod's Avatar
 
Join Date: Mar 2010
Location: Whitehorse Yukon
Posts: 321
Re: Project '64 Cheapskate

well glad to see your ok! Ive been in a few accidents caused by others and I can relate to the neck and back issues. well between work and family, Im a happy man, but need a new set of wheels on the road for summer. theres a lot of new cars in town. most guys here talk the talk then run down south and buy a finished car!!! then try and convince everyone that they built it. lol Its a small town and everyone knows everyone, so come on guys.lol got my 48 out two days ago and been driving it around, but im bored with it. installed new gauges on friday, but the lust is gone on this one. the sad part is I could get a good dollar for it, but this is the one my wife is in love with. I try to talk her into letting me bodywork and paint it, but the answers the same every time!! go play with something else and leave the rat rod alone. would like to finish the 72, but ive spend a lot and I mean a lot of money on it lately, and have all my parts now minus exterior trim, bumpers, interior seat foam and carpet,ect...... well my friend lets just keep on truckin!! cheers
Attached Images
 
yukon ratrod is offline   Reply With Quote
Old 05-11-2011, 03:25 PM   #24
aspiringthomas
Registered User
 
aspiringthomas's Avatar
 
Join Date: Jan 2009
Location: McLoud, OK
Posts: 99
Re: Project '64 Cheapskate

How many gallons do the side tanks hold. I am look at my options to move the gas tank out of the cab.
Thanks Jeff.
aspiringthomas is offline   Reply With Quote
Old 06-19-2011, 05:13 PM   #25
nate95gsr
Registered User
 
Join Date: Aug 2010
Location: louisville, ky
Posts: 13
Re: Project '64 Cheapskate

Wow. Still not bad for $300 though? I can't wait to hear the shop names you come up with. Should be interesting.

Nate
__________________
In the process of looking for a 60 or newer short bed fleet side.
nate95gsr is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 03:43 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com