Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
|
11-15-2021, 10:51 AM | #1 |
Registered User
Join Date: Aug 2019
Location: Southern Colorado
Posts: 88
|
Gas Pedal on Floor Studs
Hello, I have a new pedal but it will not push on or stay on the studs. I pulled the studs out and pushed them in on the workbench where I can see what it is doing. I pushed the studs into the pedal and in about 30 seconds it pushes the stud out on its own. It seem like the socket in the rubber pedal is not big enough.
Was wondering if there is a trick or a good brand of after market deluxe gas pedal that mount to the floor studs? I'm sure there is already a tread on this but I did not find anything. Any help is appreciated. |
11-15-2021, 02:23 PM | #2 |
State of Confusion!
Join Date: Jul 2002
Location: Gulfport, MS USA
Posts: 46,979
|
Re: Gas Pedal on Floor Studs
You can get new ball studs at most any auto parts. Just sounds like the stud is worn out. I had the same issue on one of my older trucks and the new studs solved the issue.
__________________
Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God! |
11-15-2021, 03:57 PM | #3 |
Registered User
Join Date: Aug 2019
Location: Southern Colorado
Posts: 88
|
Re: Gas Pedal on Floor Studs
Thanks for the reply, the studs are also new I probably should have mentioned that to start with.
|
11-19-2021, 12:50 PM | #4 | |
Registered User
Join Date: Apr 2001
Location: DALLAS,TX
Posts: 21,997
|
Re: Gas Pedal on Floor Studs
Quote:
The answers provided all sound good & worth trying but it's possible you'll need to get creative by finding a ball stud the fits the pedal 'better' (for the opening in the pedal).
__________________
67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... Cubic inches is like Indiana Jones with a cheap pistol. |
|
11-15-2021, 04:04 PM | #5 |
State of Confusion!
Join Date: Jul 2002
Location: Gulfport, MS USA
Posts: 46,979
|
Re: Gas Pedal on Floor Studs
I would lightly sand the ball studs on the top so it can press into the pedal a little deeper and maybe that will get you over the hump of the ball.
__________________
Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God! |
11-16-2021, 11:10 PM | #6 |
Registered User
Join Date: May 2011
Location: Northern Calif.
Posts: 3,730
|
Re: Gas Pedal on Floor Studs
Wild guess here. Could you maybe drill a very small hole into each socket, and let trapped air out? Maybe the socket and ball stud are both very tight.
|
11-17-2021, 02:07 PM | #7 |
Senior Member
Join Date: Mar 2015
Location: washington
Posts: 2,265
|
Re: Gas Pedal on Floor Studs
Try put a small washer under the stud to raise it.
Could be the pedal is hitting on the floor? |
11-17-2021, 04:14 PM | #8 |
Registered User
Join Date: Apr 2017
Location: Boise, ID
Posts: 856
|
Re: Gas Pedal on Floor Studs
I had this problem when I had a floormat down. I had to cut it back to let the pedal sit properly. I ended up going to the throttle cable style and never looked back.
__________________
1968 GMC C2500 Long Bed Fleetside |
11-19-2021, 04:07 PM | #9 |
Senior Member
Join Date: Feb 2002
Location: Tucson, AZ USA
Posts: 7,350
|
Re: Gas Pedal on Floor Studs
I got tired of the OEM pedal popping out. It would then fall under the metal bail that was connected to the throttle rod. For a few years, I just used the bail as the accelerator. On long trips my foot would cramp, holding on to this one point. For a while stiff climbing boots were the answer, but I still got cramps. New accelerator pedals I tried, but they popped out, too.
Finally, when the truck was ''down,'' rebuilding the engine, I changed out to a cable throttle system. Works great now.
__________________
Every 25 years I like to rebuild that 292, whether it needs it or not. |
11-19-2021, 04:44 PM | #10 |
Registered User
Join Date: Aug 2019
Location: Southern Colorado
Posts: 88
|
Re: Gas Pedal on Floor Studs
Thanks for all the replies. The studs and pedal are aftermarket. I ended up heating up an old stud I had with a torch in a vise and when it was red I pushed the pedal on it and left it on till the stud cooled down. I seems to work ok for now, did stink up the shop for a half a day. I just did a frame off and I wish I would have used or upgraded to the cable version but I like the way the older gas pedal looks. Again thanks for the suggestions.
|
Bookmarks |
|
|