The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1967 - 1972 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 10-20-2008, 09:03 PM   #1
69ChevyRazorback
Registered User
 
Join Date: Oct 2008
Location: Searcy, AR
Posts: 92
how do you guys make your factory gauges GLOW??

man, I have installed all new LED's and im disappointed to say the least. it is still just as dim as before. what do u guys do to really make ure gauges light up???
69ChevyRazorback is offline   Reply With Quote
Old 10-20-2008, 09:17 PM   #2
BadgerTheFerret
Be nice, it was a work truck!
 
BadgerTheFerret's Avatar
 
Join Date: Oct 2008
Location: Coquille, OR
Posts: 60
Re: how do you guys make your factory gauges GLOW??

I'm not sure about the 67-72 trucks, but I had a 79 K5 and it was so dim at night I could hardly read anything.

Stock the plastic is a non reflective green'ish color, so what I did was take that cheesy "Chrome" spray paint, and paint over the green'ish color. It made a world of difference I can tell you that!
BadgerTheFerret is offline   Reply With Quote
Old 10-20-2008, 09:20 PM   #3
69ChevyRazorback
Registered User
 
Join Date: Oct 2008
Location: Searcy, AR
Posts: 92
Re: how do you guys make your factory gauges GLOW??

Quote:
Originally Posted by BadgerTheFerret View Post
I'm not sure about the 67-72 trucks, but I had a 79 K5 and it was so dim at night I could hardly read anything.

Stock the plastic is a non reflective green'ish color, so what I did was take that cheesy "Chrome" spray paint, and paint over the green'ish color. It made a world of difference I can tell you that!
hmm, good thought I guess. the chrome paint would make it more reflective...got any pics??? im not sure if my LED's are just low grade and not bright or what. I bought the LED's that are inverted and have a 360 degree light. just the way our factory dashes are made, its so hard to get alot of light to our gauges. maybe I went wrong by putting in red, I might of shoulda went with a bright white...
69ChevyRazorback is offline   Reply With Quote
Old 10-20-2008, 09:42 PM   #4
Longhorn Man
its all about the +6 inches
 
Longhorn Man's Avatar
 
Join Date: Jan 2001
Location: Hilliard Ohio
Posts: 2,693
Re: how do you guys make your factory gauges GLOW??

Paint the tin white, it makes a HUGE improvement.
I think I saw in another thread you did white overlays too... I have plain old white 194 bulbs in my burb, and they are too bright with the white tin and white guages... and in the longhorn, i have blue 4 diode led 194 replacements, and with the white tins and overlays, they look awesome, but again, just a tad too bright.
Longhorn Man is offline   Reply With Quote
Old 10-20-2008, 09:55 PM   #5
kyull67
Registered User
 
kyull67's Avatar
 
Join Date: Nov 2006
Location: Springfield/Kansas City
Posts: 1,842
Re: how do you guys make your factory gauges GLOW??

Yeah, 194 bulbs with white overlays are a little too bright at night, kind of hard to read the numbers.
Attached Images
 
kyull67 is offline   Reply With Quote
Old 10-20-2008, 10:04 PM   #6
69ChevyRazorback
Registered User
 
Join Date: Oct 2008
Location: Searcy, AR
Posts: 92
Re: how do you guys make your factory gauges GLOW??

Quote:
Originally Posted by kyull67 View Post
Yeah, 194 bulbs with white overlays are a little too bright at night, kind of hard to read the numbers.
well i do have the white overlay, maybe it is just the Red LED's.... or maybe after I put the dash together not all the bulbs were lit up...i will try again tomorrow
69ChevyRazorback is offline   Reply With Quote
Old 10-21-2008, 08:05 AM   #7
kyull67
Registered User
 
kyull67's Avatar
 
Join Date: Nov 2006
Location: Springfield/Kansas City
Posts: 1,842
Re: how do you guys make your factory gauges GLOW??

Quote:
Originally Posted by 69ChevyRazorback View Post
well i do have the white overlay, maybe it is just the Red LED's.... or maybe after I put the dash together not all the bulbs were lit up...i will try again tomorrow
While installing my LED's, I noticed the bulbs only worked one way. If some don't work take them out and turn 180 degrees.
kyull67 is offline   Reply With Quote
Old 10-20-2008, 10:07 PM   #8
byrd
Union Electrician
 
byrd's Avatar
 
Join Date: Feb 2005
Location: Louisville, Ky.
Posts: 3,356
Re: how do you guys make your factory gauges GLOW??

Quote:
Originally Posted by kyull67 View Post
Yeah, 194 bulbs with white overlays are a little too bright at night, kind of hard to read the numbers.
I sell a lens that has a different color green numbers on it and they are a more transluscent paint and they will actually light up better with the LED's
Here is a pic of said lens...
Attached Images
 
__________________
69 Custom-10 SWB FLEETSIDE 350/350 TH Dropped 3.5/5.5"
Help support the board->HERE
Board vendors -> Vendors list
Zip:40272
Big Sandy Survivor...

Quote:
We cannot choose the way we die, but we can choose the way we live
Quote:
If you can't fix it with a hammer, you've got an electrical problem.
Quote:
I think Congressmen should wear uniforms like NASCAR drivers so we could identify their corporate sponsors
byrd is offline   Reply With Quote
Old 10-21-2008, 12:14 AM   #9
BadgerTheFerret
Be nice, it was a work truck!
 
BadgerTheFerret's Avatar
 
Join Date: Oct 2008
Location: Coquille, OR
Posts: 60
Re: how do you guys make your factory gauges GLOW??

Quote:
Originally Posted by byrd View Post
I sell a lens that has a different color green numbers on it and they are a more transluscent paint and they will actually light up better with the LED's
Here is a pic of said lens...
Thats pretty slick looking! What is the asking price on that item?
BadgerTheFerret is offline   Reply With Quote
Old 10-21-2008, 03:42 PM   #10
byrd
Union Electrician
 
byrd's Avatar
 
Join Date: Feb 2005
Location: Louisville, Ky.
Posts: 3,356
Re: how do you guys make your factory gauges GLOW??

Quote:
Originally Posted by BadgerTheFerret View Post
Thats pretty slick looking! What is the asking price on that item?


$35 shipped,
__________________
69 Custom-10 SWB FLEETSIDE 350/350 TH Dropped 3.5/5.5"
Help support the board->HERE
Board vendors -> Vendors list
Zip:40272
Big Sandy Survivor...

Quote:
We cannot choose the way we die, but we can choose the way we live
Quote:
If you can't fix it with a hammer, you've got an electrical problem.
Quote:
I think Congressmen should wear uniforms like NASCAR drivers so we could identify their corporate sponsors
byrd is offline   Reply With Quote
Old 10-21-2008, 02:36 PM   #11
70' GMC
HERE.......Somewhere
 
70' GMC's Avatar
 
Join Date: Oct 2006
Location: Birmingham AL
Posts: 2,488
Re: how do you guys make your factory gauges GLOW??

Quote:
Originally Posted by byrd View Post
I sell a lens that has a different color green numbers on it and they are a more transluscent paint and they will actually light up better with the LED's
Here is a pic of said lens...
What does it look like at night?
__________________
Current rides: 2013 Hyundai elantra gt DD
1995 camaro my first crush lmao
Was: 1970 with a 350 4barrel and 288 horses

Classics make it possible!
70' GMC is offline   Reply With Quote
Old 10-21-2008, 03:18 PM   #12
70c10
67-72 Addict!
 
70c10's Avatar
 
Join Date: Feb 2002
Location: The TAX State!
Posts: 7,857
Re: how do you guys make your factory gauges GLOW??

Quote:
Originally Posted by 70' GMC View Post
What does it look like at night?
This my lens I got from byrd You can see the numbers and letters very clearly. I use the refractor type LED bulbs that have the 5 LEDs per bulb
Attached Images
 
__________________
Jim

1970 C/10 Fleetside w/Ghost Flames
Lowered 4.5" front and 4" rear (Raked)
355/350 Turbo w/shift kit
10" Redneck Performance Verter w/2500 stall
Hooker Super Comps part#2808-1
Performer RPM Air-Gap
12 Bolt w/3:73 gears- Eaton Posi
Comp Cams XE262 with 1.6 Crane Energizers, Road Demon 625 and Brodix IK 180 heads
70c10 is offline   Reply With Quote
Old 10-20-2008, 10:03 PM   #13
byrd
Union Electrician
 
byrd's Avatar
 
Join Date: Feb 2005
Location: Louisville, Ky.
Posts: 3,356
Re: how do you guys make your factory gauges GLOW??

White paint is the only way to go, that being said with the white gauges LED's do seem to make a glowing effect. The white paint on the inside gives a brighter more even lit(sp) cluster. I drive my truck a lot at night and the stock 194's are plenty bright, when the inner tins are painted white
__________________
69 Custom-10 SWB FLEETSIDE 350/350 TH Dropped 3.5/5.5"
Help support the board->HERE
Board vendors -> Vendors list
Zip:40272
Big Sandy Survivor...

Quote:
We cannot choose the way we die, but we can choose the way we live
Quote:
If you can't fix it with a hammer, you've got an electrical problem.
Quote:
I think Congressmen should wear uniforms like NASCAR drivers so we could identify their corporate sponsors
byrd is offline   Reply With Quote
Old 10-21-2008, 08:19 PM   #14
72BlckButy
Tot Roddin'
 
72BlckButy's Avatar
 
Join Date: Apr 2005
Location: Mid-MO
Posts: 24,461
Re: how do you guys make your factory gauges GLOW??

I've always loved your gauge panels byrd... nice work!
__________________
-Nate

1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6)
1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior)
2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package)
72BlckButy is offline   Reply With Quote
Old 10-22-2008, 12:46 AM   #15
MonteSS454
Account Suspended
 
MonteSS454's Avatar
 
Join Date: Jun 2007
Location: Claremore, Oklahoma
Posts: 821
Re: how do you guys make your factory gauges GLOW??

Who sells white faced gauges?
MonteSS454 is offline   Reply With Quote
Old 10-22-2008, 01:08 AM   #16
69ChevyRazorback
Registered User
 
Join Date: Oct 2008
Location: Searcy, AR
Posts: 92
Re: how do you guys make your factory gauges GLOW??

Quote:
Originally Posted by MonteSS454 View Post
Who sells white faced gauges?
whitefacegauges.net I believe is their website.

go to ebay and search "67-72 white face gauges" they are stickers that go over your factory gauges for 25 bucks and look pretty nice.
69ChevyRazorback is offline   Reply With Quote
Old 10-22-2008, 06:13 AM   #17
byrd
Union Electrician
 
byrd's Avatar
 
Join Date: Feb 2005
Location: Louisville, Ky.
Posts: 3,356
Re: how do you guys make your factory gauges GLOW??

Quote:
Originally Posted by MonteSS454 View Post
Who sells white faced gauges?
I sell the overlay kit as well, just a little cheaper at $20 a set shipped(tach and vac gauges are $3 more each).Mine are a little different than the ones you buy from their web site. I have mine to include the hot mark on the temp gauge to be red, not black as they come from them, also I punch my one holes in the speedo for the mounting screws which gives the speedo face a little cleaner look.
__________________
69 Custom-10 SWB FLEETSIDE 350/350 TH Dropped 3.5/5.5"
Help support the board->HERE
Board vendors -> Vendors list
Zip:40272
Big Sandy Survivor...

Quote:
We cannot choose the way we die, but we can choose the way we live
Quote:
If you can't fix it with a hammer, you've got an electrical problem.
Quote:
I think Congressmen should wear uniforms like NASCAR drivers so we could identify their corporate sponsors

Last edited by byrd; 10-22-2008 at 04:53 PM.
byrd is offline   Reply With Quote
Old 10-22-2008, 02:47 PM   #18
69ChevyRazorback
Registered User
 
Join Date: Oct 2008
Location: Searcy, AR
Posts: 92
Re: how do you guys make your factory gauges GLOW??

Quote:
Originally Posted by byrd View Post
I sell the overlay kit as well, just a little cheaper at $20 a set shipped(tach and vac gauges are $3 more each).Mine are a little different than the ones you buy from their web site. I have mine to include the hot mark on the temp gauge to be red, not black as they come from them, also I pump my one holes in the speedo for the mounting screws which gives the speedo face a little cleaner look.
sorry byrd ordered before i knew you had these goodies
69ChevyRazorback is offline   Reply With Quote
Old 10-22-2008, 11:08 AM   #19
67chevemall
Registered User
 
67chevemall's Avatar
 
Join Date: Apr 2003
Location: NB
Posts: 3,367
Re: how do you guys make your factory gauges GLOW??

Byrd= the man
Buy from him.

0.02
__________________
1968 Chevy C10 307 3ott fleetside
1967 Chevy C/10 V8, 3spd, fleetside lwb.Sold
1967 Chev C/10 step, 383, M21. SOLD
67chevemall is offline   Reply With Quote
Old 10-22-2008, 01:03 PM   #20
MonteSS454
Account Suspended
 
MonteSS454's Avatar
 
Join Date: Jun 2007
Location: Claremore, Oklahoma
Posts: 821
Re: how do you guys make your factory gauges GLOW??

PM Sent byrd
MonteSS454 is offline   Reply With Quote
Old 10-23-2008, 10:17 PM   #21
kamikazekyle05
Registered User
 
kamikazekyle05's Avatar
 
Join Date: Nov 2007
Location: Vernon, Texas
Posts: 331
Re: how do you guys make your factory gauges GLOW??

Hey byrd, do you have any night pics of the green ones glowing?
kamikazekyle05 is offline   Reply With Quote
Old 10-30-2008, 12:39 AM   #22
chevy4ever
Registered User
 
chevy4ever's Avatar
 
Join Date: Aug 2002
Location: Corpus Christi, Tx
Posts: 156
Re: how do you guys make your factory gauges GLOW??

whats a good site to buy the overlays? I have a 90 burb and im tryin to match the lighting to a blue color theme i have going. Im going to order the led bulbs. I found a few sites for them. Anyone got any links for the over lays and or the bulbs.
__________________
email is matthew.solar1984@gmail.com

1980 Malibu Classic 2door(sold) 8-(
2001 Silverado single cab 4.3 V6(stolen and the totalled)
1979 GMC sierra swb stepside 350(sold)
1990 chevy suburban 4x4 350
2001 tahoe 4x4
2001 suburban 4x4
chevy4ever is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 08:48 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com