AZ Parting out a 69 gmc 2wd - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**t korinek** · 07-10-2013, 05:40 PM

Parting this 69 or 70 GMC 2wd 1/2 ton truck.

Steering column $80 + shipping

Gauge cluster $60 shippedSOLD

under hood wiring harness's in decent shape $75 for both

AC controller $60SOLD

Complete AC system $350 + shipping Was sealed & holding pressure when removed.SOLD

Cab has some rust in the roof where the mirror is $200 SOLD

Doors have some rust in the bottom corners, OK drivers, not worth shipping

Bed with wood floor $300SOLD

GMC Tailgate $150SOLD

Fenders $90 each (no Shipping)

Hood, straight, no bow $100

Inner fenders no good.

Windshield 1 small star passenger side $45SOLD

High /Low horn set up with wire $45 shipped worksSOLD

Bumpers, brackets & grill already sold
Any thing else ask & I'll price it,
Truck is also for parts locally.
Thanks,
Tom

**t korinek** · 07-10-2013, 05:43 PM

More pics

coahmike00 · 08-14-2013, 10:23 PM

how about booster complete?

**t korinek** · 08-14-2013, 11:27 PM

sold the booster & assembly already

**gmc 2500 4x4** · 07-10-2013, 06:47 PM

i would take the ignition and both door locks w/keys if ya want to sell them(if all are good) paul

**t korinek** · 07-10-2013, 06:54 PM

No the keys are for my Trans Am, they just happened to fit this ignition, so I'd say the switch is pretty wore out.
I have a new set of the three all keyed alike for $37 shipped Or $48 shipped with the glovebox lock too.

swamp rat · 07-10-2013, 06:57 PM

I'll take that water pump pulley how much shipped? I'm sending a PM.

**jabborabbo** · 07-10-2013, 07:46 PM

Are you selling the under dash cluster wiring harness? I'm interested if it's complete.

**t korinek** · 07-10-2013, 07:57 PM

jabborabbo Yes its for sale, its complete, the truck is in running condition, I haven't removed it yet so not sure if there are any cuts or splices in it.
If it happens to be in nice shape i'll be asking $75 + shipping

Swamp Rat Water pump pulley is $20 + $6 shipping, I'd have to check the measurements but usually all short waterpump pulleys are the same

**jabborabbo** · 07-10-2013, 08:14 PM

Quote:

Originally Posted by t korinek

jabborabbo Yes its for sale, its complete, the truck is in running condition, I haven't removed it yet so not sure if there are any cuts or splices in it.
If it happens to be in nice shape i'll be asking $75 + shipping

...

If it's uncut and pliable I'll take it!

swamp rat · 07-10-2013, 08:30 PM

Quote:

Originally Posted by t korinek

Swamp Rat Water pump pulley is $20 + $6 shipping, I'd have to check the measurements but usually all short waterpump pulleys are the same

Let me know what you find out.

tdj4bama · 07-10-2013, 10:17 PM

Is the booster/master cylinder set up for drum-drum or disk-drum?
Posted via Mobile Device

*Maximuz* · 07-10-2013, 10:30 PM

Are the rear bumper brackets available?
Posted via Mobile Device

REEDS 72 · 07-10-2013, 10:37 PM

Rear bumper is it gm? cond and price thanks Reed.

REEDS 72 · 07-10-2013, 10:44 PM

sorry I see that's its allredy sold

**CUSTOM/10** · 07-11-2013, 07:01 AM

I'll take the horns if still available !

Gary

**t korinek** · 07-11-2013, 11:07 AM

Custom10 horns are still avail, pm sent

reeds 72, I have an original chrome rear bumper if you just need a core for rechroming, its beat up $25 + shipping

Maximuz rear bumper brackets were sold with bumpers, I have new aftermarket for $70 shipped

tdj4bama its a drum drum set up

**CUSTOM/10** · 07-11-2013, 12:12 PM

I'll paypal you shortly !

Gary

tdj4bama · 07-11-2013, 12:24 PM

How much for the mc/booster and prop valve shipped to 35633? Mounting bracket and the plunger too I reckon.
Thanks, Truman
Posted via Mobile Device

georgieboy · 07-11-2013, 12:46 PM

How much to ship column to La?

**t korinek** · 07-11-2013, 05:23 PM

Georgieboy $18 shipping total $98 for the column, its out & ready to ship, everything seems to be intact, uncut & in working order.

tdj4bama $50 for the parts & $17 shipping total $67

CUSTOM10 parts are in the mail!

Swamp rat, check the spacing of the pump housing to the back of the pulley mount, the two I have here measure 11/16"
A friend has told me that he runs into this problem a lot with aftermarket water pumps not having the shafts pressed in to the right depth during manufacturing, which keeps your pulleys from not lining up.Here is a pic

**jabborabbo** · 07-11-2013, 05:52 PM

I'll take the lighter assembly with its wire lead depending on price and condition...what kinda shape is the lighter assembly in? How much for it shipped?

georgieboy · 07-11-2013, 07:07 PM

I'll take the steering colum. PM me payment info. Georgieboy

georgieboy · 07-11-2013, 09:44 PM

Thanks Tom, money sent. George

In The Ten Ring · 07-11-2013, 09:59 PM

I'm just curious, what size engine is that?

ITTR

07-10-2013, 05:40 PM	#1
t korinek Truckin' Krazy Join Date: May 2000 Location: mesa az Posts: 6,193	Parting out a 69 gmc 2wd Parting this 69 or 70 GMC 2wd 1/2 ton truck. Steering column $80 + shipping Gauge cluster $60 shippedSOLD under hood wiring harness's in decent shape $75 for both AC controller $60SOLD Complete AC system $350 + shipping Was sealed & holding pressure when removed.SOLD Cab has some rust in the roof where the mirror is $200 SOLD Doors have some rust in the bottom corners, OK drivers, not worth shipping Bed with wood floor $300SOLD GMC Tailgate $150SOLD Fenders $90 each (no Shipping) Hood, straight, no bow $100 Inner fenders no good. Windshield 1 small star passenger side $45SOLD High /Low horn set up with wire $45 shipped worksSOLD Bumpers, brackets & grill already sold Any thing else ask & I'll price it, Truck is also for parts locally. Thanks, Tom Attached Images __________________ Dealer for: American Auto Wire Precision weatherstripping Dakota Digital Trim parts Carpets Truck World seat covers & Many others Chevy Parts locator in Mesa AZ! Last edited by t korinek; 08-15-2013 at 10:12 AM.

07-10-2013, 05:43 PM	#2
t korinek Truckin' Krazy Join Date: May 2000 Location: mesa az Posts: 6,193	Re: Parting out a 69 gmc 2wd More pics Attached Images __________________ Dealer for: American Auto Wire Precision weatherstripping Dakota Digital Trim parts Carpets Truck World seat covers & Many others Chevy Parts locator in Mesa AZ!

08-14-2013, 10:23 PM	#3
coahmike00 Registered User Join Date: Jul 2013 Location: adamsville alabama Posts: 11	Re: Parting out a 69 gmc 2wd how about booster complete?

08-14-2013, 11:27 PM	#4
t korinek Truckin' Krazy Join Date: May 2000 Location: mesa az Posts: 6,193	Re: Parting out a 69 gmc 2wd sold the booster & assembly already __________________ Dealer for: American Auto Wire Precision weatherstripping Dakota Digital Trim parts Carpets Truck World seat covers & Many others Chevy Parts locator in Mesa AZ!

07-10-2013, 06:47 PM	#5
gmc 2500 4x4 Senior Member Join Date: Mar 2012 Location: ripley ny Posts: 2,959	Re: Parting out a 69 gmc 2wd i would take the ignition and both door locks w/keys if ya want to sell them(if all are good) paul

07-10-2013, 06:54 PM	#6
t korinek Truckin' Krazy Join Date: May 2000 Location: mesa az Posts: 6,193	Re: Parting out a 69 gmc 2wd No the keys are for my Trans Am, they just happened to fit this ignition, so I'd say the switch is pretty wore out. I have a new set of the three all keyed alike for $37 shipped Or $48 shipped with the glovebox lock too. __________________ Dealer for: American Auto Wire Precision weatherstripping Dakota Digital Trim parts Carpets Truck World seat covers & Many others Chevy Parts locator in Mesa AZ!

07-10-2013, 06:57 PM	#7
swamp rat Registered User Join Date: Oct 2007 Location: Spanaway Posts: 8,451	Re: Parting out a 69 gmc 2wd I'll take that water pump pulley how much shipped? I'm sending a PM. __________________ Mike. Swamp Rat build thread : http://67-72chevytrucks.com/vboard/s...d.php?t=595019 72 3/4T 4X4 4" BDS Lift 33" BFG's

07-10-2013, 07:46 PM	#8
jabborabbo Senior Member Join Date: Apr 2013 Location: Podunk, Texas Posts: 752	Re: Parting out a 69 gmc 2wd Are you selling the under dash cluster wiring harness? I'm interested if it's complete.

07-10-2013, 07:57 PM	#9
t korinek Truckin' Krazy Join Date: May 2000 Location: mesa az Posts: 6,193	Re: Parting out a 69 gmc 2wd jabborabbo Yes its for sale, its complete, the truck is in running condition, I haven't removed it yet so not sure if there are any cuts or splices in it. If it happens to be in nice shape i'll be asking $75 + shipping Swamp Rat Water pump pulley is $20 + $6 shipping, I'd have to check the measurements but usually all short waterpump pulleys are the same __________________ Dealer for: American Auto Wire Precision weatherstripping Dakota Digital Trim parts Carpets Truck World seat covers & Many others Chevy Parts locator in Mesa AZ!

07-10-2013, 10:17 PM	#12
tdj4bama Registered User Join Date: Jul 2012 Location: Florence, AL Posts: 50	Re: Parting out a 69 gmc 2wd Is the booster/master cylinder set up for drum-drum or disk-drum? Posted via Mobile Device

07-10-2013, 10:30 PM	#13
Maximuz Account Suspended Join Date: Jan 2013 Location: California Posts: 132	Re: Parting out a 69 gmc 2wd Are the rear bumper brackets available? Posted via Mobile Device

07-10-2013, 10:37 PM	#14
REEDS 72 Registered User Join Date: Apr 2011 Location: AMERICAN FORK, UTAH Posts: 535	Re: Parting out a 69 gmc 2wd Rear bumper is it gm? cond and price thanks Reed.

07-10-2013, 10:44 PM	#15
REEDS 72 Registered User Join Date: Apr 2011 Location: AMERICAN FORK, UTAH Posts: 535	Re: Parting out a 69 gmc 2wd sorry I see that's its allredy sold

07-11-2013, 07:01 AM	#16
CUSTOM/10 Senior Member Join Date: May 2003 Location: Sandown, NH Posts: 2,833	Re: Parting out a 69 gmc 2wd I'll take the horns if still available ! Gary __________________ Gary 72 SWB 4x4 My 72 SWB Build http://67-72chevytrucks.com/vboard/s...d.php?t=259859

07-11-2013, 11:07 AM	#17
t korinek Truckin' Krazy Join Date: May 2000 Location: mesa az Posts: 6,193	Re: Parting out a 69 gmc 2wd Custom10 horns are still avail, pm sent reeds 72, I have an original chrome rear bumper if you just need a core for rechroming, its beat up $25 + shipping Maximuz rear bumper brackets were sold with bumpers, I have new aftermarket for $70 shipped tdj4bama its a drum drum set up __________________ Dealer for: American Auto Wire Precision weatherstripping Dakota Digital Trim parts Carpets Truck World seat covers & Many others Chevy Parts locator in Mesa AZ!



Register or Log In To remove these advertisements.

07-11-2013, 12:12 PM	#18
CUSTOM/10 Senior Member Join Date: May 2003 Location: Sandown, NH Posts: 2,833	Re: Parting out a 69 gmc 2wd I'll paypal you shortly ! Gary __________________ Gary 72 SWB 4x4 My 72 SWB Build http://67-72chevytrucks.com/vboard/s...d.php?t=259859

07-11-2013, 12:24 PM	#19
tdj4bama Registered User Join Date: Jul 2012 Location: Florence, AL Posts: 50	Re: Parting out a 69 gmc 2wd How much for the mc/booster and prop valve shipped to 35633? Mounting bracket and the plunger too I reckon. Thanks, Truman Posted via Mobile Device

07-11-2013, 12:46 PM	#20
georgieboy Registered User Join Date: Jun 2010 Location: Shreveport, La. Posts: 13	Re: Parting out a 69 gmc 2wd How much to ship column to La?

07-11-2013, 05:23 PM	#21
t korinek Truckin' Krazy Join Date: May 2000 Location: mesa az Posts: 6,193	Re: Parting out a 69 gmc 2wd Georgieboy $18 shipping total $98 for the column, its out & ready to ship, everything seems to be intact, uncut & in working order. tdj4bama $50 for the parts & $17 shipping total $67 CUSTOM10 parts are in the mail! Swamp rat, check the spacing of the pump housing to the back of the pulley mount, the two I have here measure 11/16" A friend has told me that he runs into this problem a lot with aftermarket water pumps not having the shafts pressed in to the right depth during manufacturing, which keeps your pulleys from not lining up.Here is a pic Attached Images __________________ Dealer for: American Auto Wire Precision weatherstripping Dakota Digital Trim parts Carpets Truck World seat covers & Many others Chevy Parts locator in Mesa AZ!

07-11-2013, 05:52 PM	#22
jabborabbo Senior Member Join Date: Apr 2013 Location: Podunk, Texas Posts: 752	Re: Parting out a 69 gmc 2wd I'll take the lighter assembly with its wire lead depending on price and condition...what kinda shape is the lighter assembly in? How much for it shipped?

07-11-2013, 07:07 PM	#23
georgieboy Registered User Join Date: Jun 2010 Location: Shreveport, La. Posts: 13	Re: Parting out a 69 gmc 2wd I'll take the steering colum. PM me payment info. Georgieboy

07-11-2013, 09:44 PM	#24
georgieboy Registered User Join Date: Jun 2010 Location: Shreveport, La. Posts: 13	Re: Parting out a 69 gmc 2wd Thanks Tom, money sent. George

07-11-2013, 09:59 PM	#25
In The Ten Ring Registered User Join Date: Jun 2013 Location: West Virginia Posts: 6,421	Re: Parting out a 69 gmc 2wd I'm just curious, what size engine is that? ITTR

Register or Log In To remove these advertisements.