![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
|
![]() |
#1 |
Registered User
Join Date: Mar 2012
Location: NC
Posts: 1,101
|
86 1/2 ton shortbed Ebrake equalizer questions - SOLVED
hey guys,
here's the thing ![]() my truck was a longed from factory, but it was swapped to a shorted frame by the PO, so i have E-brake issues/questions can someone post pics of the E-brake setup on 84-87, especially the equalizer connections , and pics of the ends of the cables, so i can see what the connection points look like so i can verify i have right parts... i ordered all parts from this page for the parking brake... pedal, cables, etc. etc. i know this is wrong equalizer connection, it would only pull one cable... but that's how it looks in the LMC catalog... i know i'm missing something... pic of pedal assembly:
__________________
My build thread... http://67-72chevytrucks.com/vboard/s...d.php?t=515829 Disabled Veteran 82nd Airborne Division Operations: Desert Shield, Desert Storm, and Uphold Democracy Last edited by naphtali5725; 02-21-2014 at 01:06 PM. |
![]() |
![]() |
![]() |
#2 |
Registered User
Join Date: Jul 2007
Location: Ontario Canada
Posts: 1,006
|
Re: 86 1/2 ton shortbed Ebrake equalizer questions
You have the piece I have circled on there?
__________________
![]() 1985 C10 2004 Avalanche |
![]() |
![]() |
![]() |
#3 |
Registered User
Join Date: Mar 2012
Location: NC
Posts: 1,101
|
Re: 86 1/2 ton shortbed Ebrake equalizer questions
__________________
My build thread... http://67-72chevytrucks.com/vboard/s...d.php?t=515829 Disabled Veteran 82nd Airborne Division Operations: Desert Shield, Desert Storm, and Uphold Democracy |
![]() |
![]() |
![]() |
#4 |
Registered User
Join Date: Jul 2007
Location: Ontario Canada
Posts: 1,006
|
Re: 86 1/2 ton shortbed Ebrake equalizer questions
Maybe it's not tight enough? Looks to be hanging a bit low. I know that setup can be a bit fussy.
__________________
![]() 1985 C10 2004 Avalanche |
![]() |
![]() |
![]() |
#5 | |
Registered User
Join Date: Mar 2012
Location: NC
Posts: 1,101
|
Re: 86 1/2 ton shortbed Ebrake equalizer questions
Quote:
i hope i don't have the wrong part number cables on the rear or something, but the part numbers match the catalog pic
__________________
My build thread... http://67-72chevytrucks.com/vboard/s...d.php?t=515829 Disabled Veteran 82nd Airborne Division Operations: Desert Shield, Desert Storm, and Uphold Democracy |
|
![]() |
![]() |
![]() |
#6 |
Registered User
Join Date: Jul 2007
Location: Ontario Canada
Posts: 1,006
|
Re: 86 1/2 ton shortbed Ebrake equalizer questions
I can get a picture tomorrow when it's light out if I remember...lol.
__________________
![]() 1985 C10 2004 Avalanche |
![]() |
![]() |
![]() |
#7 |
Registered User
Join Date: Mar 2012
Location: NC
Posts: 1,101
|
Re: 86 1/2 ton shortbed Ebrake equalizer questions
LOL thanks!!!
__________________
My build thread... http://67-72chevytrucks.com/vboard/s...d.php?t=515829 Disabled Veteran 82nd Airborne Division Operations: Desert Shield, Desert Storm, and Uphold Democracy |
![]() |
![]() |
![]() |
#8 |
Registered User
Join Date: Jun 2004
Location: El Lago, TX
Posts: 1,668
|
Re: 86 1/2 ton shortbed Ebrake equalizer questions
I had similar problems when I was putting my truck back together. I couldn't find the right parts to connect the front section of cable to the section in back at the axles. I ended up ordering a new cable from O'Reilly's. The new cable is one piece all the way back and replaces the all-thread looking piece/equalizer. There is a different part number for long bed vs. shot bed. I got the wrong cable on the first attempt. My e-brake works great now.
|
![]() |
![]() |
![]() |
#9 | |
Registered User
Join Date: Mar 2012
Location: NC
Posts: 1,101
|
Re: 86 1/2 ton shortbed Ebrake equalizer questions
Quote:
__________________
My build thread... http://67-72chevytrucks.com/vboard/s...d.php?t=515829 Disabled Veteran 82nd Airborne Division Operations: Desert Shield, Desert Storm, and Uphold Democracy |
|
![]() |
![]() |
![]() |
#10 |
Registered User
Join Date: Mar 2012
Location: NC
Posts: 1,101
|
Re: 86 1/2 ton shortbed Ebrake equalizer questions
here are some pics, of my cable ends, and how it goes together from what i can tell from the service manual, and the LMC catalog diagram...
first pic... right e-brake cable end 2nd pic... left e-brake cable end with cable connector 3rd pic... same left cable end 4th pic... cable end from the front cable that attaches to the e-brake pedal 5th pic... this is how it "looks" like it is assembled in the service manual/LMC catalog... when you push the e-brake pedal, it will pull the black cable that is attached to it by the connector... which pulls the left brake cable... but looking at the pic, how the hell does it pull the right cable with the adjustor???? it looks like it will only pull the black cable, not the adjustor cable... i'm confused... something just doesn't make sense to me how that right cable can be pulled
__________________
My build thread... http://67-72chevytrucks.com/vboard/s...d.php?t=515829 Disabled Veteran 82nd Airborne Division Operations: Desert Shield, Desert Storm, and Uphold Democracy Last edited by naphtali5725; 02-20-2014 at 09:29 AM. |
![]() |
![]() |
![]() |
#11 |
Registered User
Join Date: Apr 2013
Location: Pasadena, Maryland
Posts: 160
|
Re: 86 1/2 ton shortbed Ebrake equalizer questions
From the 1987 service manual: To adjust parking brake, jack up rear of vehicle and put on stands. Safety First!
1- Loosen equalizer nut. 2- Set parking brake 4 clicks. 3- Adjust equalizer nut until wheels rotate forward with a moderate drag. 4- Release brake, rotate wheels. There should be no drag. Done Your system looks to be correct by the picture in the service manual. The way it works is, right side cable sheath is anchored to the frame and pulled first along with the entire left side cable. Once the right cable has tension but not completely tight the left cable sheath is anchored to the equalizer won't pull further forward. At this point the equalizer will pull the left cable tight. Looks like the adjustment is just too loose by all the thread showing. On my truck I have very little thread left on the adjustment. |
![]() |
![]() |
![]() |
#12 | |
Registered User
Join Date: Mar 2012
Location: NC
Posts: 1,101
|
Re: 86 1/2 ton shortbed Ebrake equalizer questions
Quote:
man i wish i had some pics of it installed correctly instead of a barely visible diagram in the service manual... i'll take more detailed pics of it from both sides, i'll post later shouldn't both the left and right cables be pulled at the same time by the equalizer????? i have the shorter front cable...the one that connects to the E-brake pedal, i used the one for a shorted.
__________________
My build thread... http://67-72chevytrucks.com/vboard/s...d.php?t=515829 Disabled Veteran 82nd Airborne Division Operations: Desert Shield, Desert Storm, and Uphold Democracy |
|
![]() |
![]() |
![]() |
#13 |
Registered User
Join Date: Jul 2007
Location: Ontario Canada
Posts: 1,006
|
Re: 86 1/2 ton shortbed Ebrake equalizer questions
I think it is too loose also.
__________________
![]() 1985 C10 2004 Avalanche |
![]() |
![]() |
![]() |
#14 |
Registered User
Join Date: Mar 2012
Location: NC
Posts: 1,101
|
Re: 86 1/2 ton shortbed Ebrake equalizer questions
i have that new front cable.. it runs from the pedal back...
can you take some pics from the end of that cable all the way back to how it connects to the left and right cables to the wheels?? i still think i am missing something
__________________
My build thread... http://67-72chevytrucks.com/vboard/s...d.php?t=515829 Disabled Veteran 82nd Airborne Division Operations: Desert Shield, Desert Storm, and Uphold Democracy |
![]() |
![]() |
![]() |
#15 |
Registered User
Join Date: Jun 2004
Location: El Lago, TX
Posts: 1,668
|
Re: 86 1/2 ton shortbed Ebrake equalizer questions
I guess we have different problems. I was missing the short section of cable or whatever goes in the middle. There was an all-thread section at the end of the cable from the brake peddle and I didn't have whatever that connects to. The new cable replaced all of that.
I didn't have to do really any adjusting. I just connect the two cables with the clip and took the slack out of the line and the emergency brake worked. |
![]() |
![]() |
![]() |
#16 |
Registered User
Join Date: Jun 2004
Location: El Lago, TX
Posts: 1,668
|
Re: 86 1/2 ton shortbed Ebrake equalizer questions
|
![]() |
![]() |
![]() |
#17 |
Registered User
Join Date: Jun 2004
Location: El Lago, TX
Posts: 1,668
|
Re: 86 1/2 ton shortbed Ebrake equalizer questions
|
![]() |
![]() |
![]() |
#18 |
Registered User
Join Date: Mar 2012
Location: NC
Posts: 1,101
|
Re: 86 1/2 ton shortbed Ebrake equalizer questions
Greenlee, thanks man, that's how i have mine setup, just don't see how both cables are pulled at the same time, but then again i'm a high school drop out LOL
__________________
My build thread... http://67-72chevytrucks.com/vboard/s...d.php?t=515829 Disabled Veteran 82nd Airborne Division Operations: Desert Shield, Desert Storm, and Uphold Democracy |
![]() |
![]() |
![]() |
#19 |
Registered User
Join Date: Mar 2012
Location: NC
Posts: 1,101
|
Re: 86 1/2 ton shortbed Ebrake equalizer questions
i connected everything like the diagrams i looked at.
adjusted per the service manual, and what Oldriginal86 posted. here are the pics... i hope it's right now... the 1st pic, where the thin black cable runs thru the equalizer... that hole is a little sharp... seems like it will scuff up/wear the coating on the cable... opinions?
__________________
My build thread... http://67-72chevytrucks.com/vboard/s...d.php?t=515829 Disabled Veteran 82nd Airborne Division Operations: Desert Shield, Desert Storm, and Uphold Democracy |
![]() |
![]() |
![]() |
#20 | ||
Registered User
Join Date: May 2009
Location: Motor City
Posts: 9,194
|
Re: 86 1/2 ton shortbed Ebrake equalizer questions
Quote:
Quote:
K
__________________
Chevrolet Flint Assembly 1979-1986 GM Full Size Truck Engineering 1986 - 2019 Intro from an Old Assembly Guy: http://67-72chevytrucks.com/vboard/s...d.php?t=342926 My Pontiac story: http://forums.maxperformanceinc.com/...d.php?t=560524 Chevelle intro: http://www.superchevy.com/features/s...hevy-chevelle/ |
||
![]() |
![]() |
![]() |
#21 |
Registered User
Join Date: Mar 2012
Location: NC
Posts: 1,101
|
Re: 86 1/2 ton shortbed Ebrake equalizer questions
i looked at the equalizer that come with the truck, and no bushing etc. in it, so looks like factory, it seems to be working fine, went thru the adjustment procedure ok
as always, thanks again Keith for your input!!! thanks to all that posted Kind regards
__________________
My build thread... http://67-72chevytrucks.com/vboard/s...d.php?t=515829 Disabled Veteran 82nd Airborne Division Operations: Desert Shield, Desert Storm, and Uphold Democracy |
![]() |
![]() |
![]() |
#22 |
Registered User
Join Date: Mar 2012
Location: NC
Posts: 1,101
|
Re: 86 1/2 ton shortbed Ebrake equalizer questions
one more...
__________________
My build thread... http://67-72chevytrucks.com/vboard/s...d.php?t=515829 Disabled Veteran 82nd Airborne Division Operations: Desert Shield, Desert Storm, and Uphold Democracy |
![]() |
![]() |
![]() |
Bookmarks |
|
|