71 long bed stepside w/ frame solid - Pa - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Burnsman · 06-18-2008, 09:43 PM

71 3/4 ton stepside bed and rolling frame w/ 292 and 4 speed. From arizona. Very solid. Has the utility fenders that bolt on in place of the factory fenders. Wood floor needs replaced. Gate is straight (has some surface rust). Eaton rear. Coil spring suspension with helpers. Nice frame and trailing arms. Don't know much about the motor. Someone had started painteing and detailing it. Front disc brakes. Cab is not included. $500.

**special-K** · 06-18-2008, 10:07 PM

This is killing me.I have been looking for those boxes forever.I have a decent long Stepside bed except a rusty spot on each side of the top rail from a cap sitting on it since new.The floor is great.Fenders only have rust in lower fronts,no dents,original paint.
Hmmm...do I get this and sell the bed off my white GMC???
Are the tool boxes in nice condition.I`m thinking if they look good,then I will take it.Just my style there.

Burnsman · 06-18-2008, 10:25 PM

I'll drag them out tomorrow after work and take some pics. It would make a cool bed.......

**special-K** · 06-18-2008, 10:50 PM

Some may cringe.But,it would be my dream to have a Sierra Grande work truck.Those beds look good being low profile and narrow.Can`t beat a Stepside,I mean Fenderside gate on the back.It would be nice if that 292 was a good one,too.I keep leaning towards a built 292 in my shortbed Stepside 4wd with K/30 axles.You wouldn`t happen to know the ratio in that rear?Just thinking I could offer that with my Wrecker if someone doesn`t need to haul as much.That thing has 5.13s,now.

Burnsman · 06-19-2008, 09:02 PM

Here's some more pics. Found the lights. Only rust in the bed I could find was on driver side on the inside lip for about 3" (see pic). Tailgate has a few dents. Utility fenders are solid, but not 100% ding free. There are a few bumps/bruises here/there. Very fixable. Let me know if you need any more pics.

Burnsman · 06-19-2008, 09:05 PM

More.

Burnsman · 06-19-2008, 09:08 PM

Last. Also, not sure on rear. Thinking it probably has 4.10's, but not sure.

Burnsman · 06-21-2008, 04:18 PM

ttt

**special-K** · 06-22-2008, 06:32 AM

Brian,I want this.Just know it`ll take some doing to get it down here.I don`t want to stick you with it for too long.LMK the situation with that.Can you pm your address so I can mapquest what I`m getting into?Thanks

Burnsman · 07-21-2008, 09:52 PM

gate

**CPNE** · 07-22-2008, 09:25 AM

I'm interested too, but need to figure out my options. Is cab for sale too?

Burnsman · 07-22-2008, 09:38 AM

Jeff, long story I'll try to make short. Disc brakes on the chassis may be gone. Tailgate is also a maybe. The 292 and 4 speed are gone. The cab and front clip were being saved for a shortbed project I was piecing together (have fleet bed, frame, etc.). Only way I'd sell cab is if someone took all of the shortbed fleet project. So, all I have left is the bed itself and frame minus the front discs. The trailing arms are solid. Has overloads. I'd sell the bed minus gate for $275 or with rest of frame $325. You could haul the bed in a truck or tow the frame/bed with a dolly. If the gate/disc set-up don't sell, I'll let you know. Brian

**CPNE** · 07-22-2008, 09:42 AM

Ok, I figured the cab was not for sale. Your bed is still in the running, logistics may make it a no go, so no worries. Grendel has a fleetside much closer that may fit the bill.

Jeff

Burnsman · 07-22-2008, 10:41 PM

Pics of gate

06-18-2008, 09:43 PM	#1
Burnsman Chevy Freak Join Date: Sep 2002 Location: Meadville, Pa. Posts: 2,804	71 long bed stepside w/ frame solid - Pa 71 3/4 ton stepside bed and rolling frame w/ 292 and 4 speed. From arizona. Very solid. Has the utility fenders that bolt on in place of the factory fenders. Wood floor needs replaced. Gate is straight (has some surface rust). Eaton rear. Coil spring suspension with helpers. Nice frame and trailing arms. Don't know much about the motor. Someone had started painteing and detailing it. Front disc brakes. Cab is not included. $500. Attached Images __________________ 69 GMC SWB, 350 70 Chevy LWB, 350 55 chevy gasser, 461 73 Camaro, 496 67 RS Camaro, 406 64 Chevelle, 588 71 Nova, 565 67 Camaro, 461

06-18-2008, 10:07 PM	#2
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,852	Re: 71 long bed stepside w/ frame solid - Pa This is killing me.I have been looking for those boxes forever.I have a decent long Stepside bed except a rusty spot on each side of the top rail from a cap sitting on it since new.The floor is great.Fenders only have rust in lower fronts,no dents,original paint. Hmmm...do I get this and sell the bed off my white GMC??? Are the tool boxes in nice condition.I`m thinking if they look good,then I will take it.Just my style there. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

06-18-2008, 10:25 PM	#3
Burnsman Chevy Freak Join Date: Sep 2002 Location: Meadville, Pa. Posts: 2,804	Re: 71 long bed stepside w/ frame solid - Pa I'll drag them out tomorrow after work and take some pics. It would make a cool bed....... __________________ 69 GMC SWB, 350 70 Chevy LWB, 350 55 chevy gasser, 461 73 Camaro, 496 67 RS Camaro, 406 64 Chevelle, 588 71 Nova, 565 67 Camaro, 461

06-18-2008, 10:50 PM	#4
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,852	Re: 71 long bed stepside w/ frame solid - Pa Some may cringe.But,it would be my dream to have a Sierra Grande work truck.Those beds look good being low profile and narrow.Can`t beat a Stepside,I mean Fenderside gate on the back.It would be nice if that 292 was a good one,too.I keep leaning towards a built 292 in my shortbed Stepside 4wd with K/30 axles.You wouldn`t happen to know the ratio in that rear?Just thinking I could offer that with my Wrecker if someone doesn`t need to haul as much.That thing has 5.13s,now. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

06-19-2008, 09:02 PM	#5
Burnsman Chevy Freak Join Date: Sep 2002 Location: Meadville, Pa. Posts: 2,804	Re: 71 long bed stepside w/ frame solid - Pa Here's some more pics. Found the lights. Only rust in the bed I could find was on driver side on the inside lip for about 3" (see pic). Tailgate has a few dents. Utility fenders are solid, but not 100% ding free. There are a few bumps/bruises here/there. Very fixable. Let me know if you need any more pics. Attached Images __________________ 69 GMC SWB, 350 70 Chevy LWB, 350 55 chevy gasser, 461 73 Camaro, 496 67 RS Camaro, 406 64 Chevelle, 588 71 Nova, 565 67 Camaro, 461

06-19-2008, 09:05 PM	#6
Burnsman Chevy Freak Join Date: Sep 2002 Location: Meadville, Pa. Posts: 2,804	Re: 71 long bed stepside w/ frame solid - Pa More. Attached Images __________________ 69 GMC SWB, 350 70 Chevy LWB, 350 55 chevy gasser, 461 73 Camaro, 496 67 RS Camaro, 406 64 Chevelle, 588 71 Nova, 565 67 Camaro, 461

06-19-2008, 09:08 PM	#7
Burnsman Chevy Freak Join Date: Sep 2002 Location: Meadville, Pa. Posts: 2,804	Re: 71 long bed stepside w/ frame solid - Pa Last. Also, not sure on rear. Thinking it probably has 4.10's, but not sure. Attached Images __________________ 69 GMC SWB, 350 70 Chevy LWB, 350 55 chevy gasser, 461 73 Camaro, 496 67 RS Camaro, 406 64 Chevelle, 588 71 Nova, 565 67 Camaro, 461

06-21-2008, 04:18 PM	#8
Burnsman Chevy Freak Join Date: Sep 2002 Location: Meadville, Pa. Posts: 2,804	Re: 71 long bed stepside w/ frame solid - Pa ttt __________________ 69 GMC SWB, 350 70 Chevy LWB, 350 55 chevy gasser, 461 73 Camaro, 496 67 RS Camaro, 406 64 Chevelle, 588 71 Nova, 565 67 Camaro, 461

06-22-2008, 06:32 AM	#9
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,852	Re: 71 long bed stepside w/ frame solid - Pa Brian,I want this.Just know it`ll take some doing to get it down here.I don`t want to stick you with it for too long.LMK the situation with that.Can you pm your address so I can mapquest what I`m getting into?Thanks __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

07-21-2008, 09:52 PM	#10
Burnsman Chevy Freak Join Date: Sep 2002 Location: Meadville, Pa. Posts: 2,804	Re: 71 long bed stepside w/ frame solid - Pa gate Attached Images __________________ 69 GMC SWB, 350 70 Chevy LWB, 350 55 chevy gasser, 461 73 Camaro, 496 67 RS Camaro, 406 64 Chevelle, 588 71 Nova, 565 67 Camaro, 461

07-22-2008, 09:25 AM	#11
CPNE Resident Curmudgeon Join Date: Dec 1999 Location: NH Posts: 6,664	Re: 71 long bed stepside w/ frame solid - Pa I'm interested too, but need to figure out my options. Is cab for sale too? __________________ Currently on or near the homestead: 67 Chevy SWB 2WD stepside 350/3 on tree (Pat's) 67 GMC SWB 2WD Fleet 402/auto (Brian's under construction) 67 Chevy 3/4 ton 2WD 402/auto (Business Hauler) 67 Chevy 1 ton dually 2WD 396/4 speed (Former business hauler, Needs TLC) 68 Chevy 1/2 ton Suburban 2WD 250 six/3 on tree (Brian's Needs TLC) 70 Chevy 3/4 ton 4WD 350/4 speed (Pat's - Disguised as a 68 GMC) 71 Chevy SWB stepside (Crushed by tree - parts donor) 72 Chevy 3/4 ton 4WD (Parts donor) 72 Chevy 3/4 ton 4WD Suburban (Parts Donor) 72 GMC 3/4 ton 4WD 292 six/4 speed (Mine - Disguised as a 67 GMC) 81 GMC 4WD Dually Dump Body 350/4 speed (Business Hauler) 82 Camaro Z/28 355/Super T-10 (Pat's toy) 93 Caprice 9C1 (Brian's Cop Car) 02 Toyota Camry (Reliable but a souless steel and plastic hulk) 2011 2SS RS Camaro M6 Factory Hurst Shifter Maybe I need to sell some of this crap Yet another Bozo with a sawz-all

07-22-2008, 09:38 AM	#12
Burnsman Chevy Freak Join Date: Sep 2002 Location: Meadville, Pa. Posts: 2,804	Re: 71 long bed stepside w/ frame solid - Pa Jeff, long story I'll try to make short. Disc brakes on the chassis may be gone. Tailgate is also a maybe. The 292 and 4 speed are gone. The cab and front clip were being saved for a shortbed project I was piecing together (have fleet bed, frame, etc.). Only way I'd sell cab is if someone took all of the shortbed fleet project. So, all I have left is the bed itself and frame minus the front discs. The trailing arms are solid. Has overloads. I'd sell the bed minus gate for $275 or with rest of frame $325. You could haul the bed in a truck or tow the frame/bed with a dolly. If the gate/disc set-up don't sell, I'll let you know. Brian __________________ 69 GMC SWB, 350 70 Chevy LWB, 350 55 chevy gasser, 461 73 Camaro, 496 67 RS Camaro, 406 64 Chevelle, 588 71 Nova, 565 67 Camaro, 461

07-22-2008, 09:42 AM	#13
CPNE Resident Curmudgeon Join Date: Dec 1999 Location: NH Posts: 6,664	Re: 71 long bed stepside w/ frame solid - Pa Ok, I figured the cab was not for sale. Your bed is still in the running, logistics may make it a no go, so no worries. Grendel has a fleetside much closer that may fit the bill. Jeff __________________ Currently on or near the homestead: 67 Chevy SWB 2WD stepside 350/3 on tree (Pat's) 67 GMC SWB 2WD Fleet 402/auto (Brian's under construction) 67 Chevy 3/4 ton 2WD 402/auto (Business Hauler) 67 Chevy 1 ton dually 2WD 396/4 speed (Former business hauler, Needs TLC) 68 Chevy 1/2 ton Suburban 2WD 250 six/3 on tree (Brian's Needs TLC) 70 Chevy 3/4 ton 4WD 350/4 speed (Pat's - Disguised as a 68 GMC) 71 Chevy SWB stepside (Crushed by tree - parts donor) 72 Chevy 3/4 ton 4WD (Parts donor) 72 Chevy 3/4 ton 4WD Suburban (Parts Donor) 72 GMC 3/4 ton 4WD 292 six/4 speed (Mine - Disguised as a 67 GMC) 81 GMC 4WD Dually Dump Body 350/4 speed (Business Hauler) 82 Camaro Z/28 355/Super T-10 (Pat's toy) 93 Caprice 9C1 (Brian's Cop Car) 02 Toyota Camry (Reliable but a souless steel and plastic hulk) 2011 2SS RS Camaro M6 Factory Hurst Shifter Maybe I need to sell some of this crap Yet another Bozo with a sawz-all

07-22-2008, 10:41 PM	#14
Burnsman Chevy Freak Join Date: Sep 2002 Location: Meadville, Pa. Posts: 2,804	Re: 71 long bed stepside w/ frame solid - Pa Pics of gate Attached Images __________________ 69 GMC SWB, 350 70 Chevy LWB, 350 55 chevy gasser, 461 73 Camaro, 496 67 RS Camaro, 406 64 Chevelle, 588 71 Nova, 565 67 Camaro, 461



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.