Pic Request Power steering lines routing. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

skokie · 04-12-2005, 01:39 AM

Title says it all. I am going to have the driver side inner fender off so I figured I would straighten that out while I was in there.
Thanks

**VetteVet** · 04-12-2005, 01:55 AM

here is a good pic that someone posted the link to earlier. It is the second from the bottom. Click on the pic to enlarge it. Did you find out what was wrong with the th400 yet? glad you got the truck going.
VetteVet

http://www.customclassictrucks.com/techarticles/84378/

JimKshortstep4x4 · 04-12-2005, 08:22 AM

This picture shows the lines and how they are routed. If you need the hose routing, I can take a pic and post.

Jim

skokie · 04-12-2005, 11:20 AM

Quote:

Originally Posted by JimKshortstep4x4

This picture shows the lines and how they are routed. If you need the hose routing, I can take a pic and post.

Jim

Jim
If you could that would be great.

Thanks

JimKshortstep4x4 · 04-12-2005, 08:27 PM

Skokie,
The pic leaves a little to be desired becuse of the location. Hopefully it will help.

On this setup the pressure hose, (the larger one) goes in between the bracket and the pump where it hooks to the pressure outlet on the pump.

The return hose is outside of the bracket because the return nipple on the pump was bent by the PO and I was afraid to rebend it. The factory routed both hoses between the bracket that fastens to the motor mount and the pump.

Jim

skokie · 04-13-2005, 01:22 AM

Jim

Thanks for that pic. Also after I saw this post I grabbed my assembly manual and it took me almost 2 times going through it but I found this.

04-12-2005, 01:39 AM	#1
skokie Registered User Join Date: Oct 2003 Location: San Jose Ca. Posts: 3,334	Pic Request Power steering lines routing. Title says it all. I am going to have the driver side inner fender off so I figured I would straighten that out while I was in there. Thanks __________________ RIP to my son Dylan. 5/17/2002 - 8/18/2018 If you want to know more about rare forms of pediatric cancer or if you want to help fund pediatric cancer research, please check out the website for the non-profit I started. https://slothforpedcancer.org 68 build thread http://67-72chevytrucks.com/vboard/s...d.php?t=223234

04-12-2005, 01:55 AM	#2
VetteVet Msgt USAF Ret Join Date: Jan 2005 Location: Kalamazoo, Michigan Posts: 8,709	hose routing here is a good pic that someone posted the link to earlier. It is the second from the bottom. Click on the pic to enlarge it. Did you find out what was wrong with the th400 yet? glad you got the truck going. VetteVet http://www.customclassictrucks.com/techarticles/84378/ __________________ VetteVet metallic green 67 stepside 74 corvette convertible 1965 Harley sportster 1995 Harley wide glide Growing old is hell, but it beats the alternative. Last edited by VetteVet; 04-12-2005 at 02:00 AM.

04-12-2005, 08:22 AM	#3
JimKshortstep4x4 Senior Member Join Date: Jul 2001 Location: Muskegon,MI,USA Posts: 6,026	This picture shows the lines and how they are routed. If you need the hose routing, I can take a pic and post. Jim Attached Images

04-12-2005, 08:27 PM	#5
JimKshortstep4x4 Senior Member Join Date: Jul 2001 Location: Muskegon,MI,USA Posts: 6,026	Skokie, The pic leaves a little to be desired becuse of the location. Hopefully it will help. On this setup the pressure hose, (the larger one) goes in between the bracket and the pump where it hooks to the pressure outlet on the pump. The return hose is outside of the bracket because the return nipple on the pump was bent by the PO and I was afraid to rebend it. The factory routed both hoses between the bracket that fastens to the motor mount and the pump. Jim Attached Images

04-13-2005, 01:22 AM	#6
skokie Registered User Join Date: Oct 2003 Location: San Jose Ca. Posts: 3,334	Jim Thanks for that pic. Also after I saw this post I grabbed my assembly manual and it took me almost 2 times going through it but I found this. Attached Images __________________ RIP to my son Dylan. 5/17/2002 - 8/18/2018 If you want to know more about rare forms of pediatric cancer or if you want to help fund pediatric cancer research, please check out the website for the non-profit I started. https://slothforpedcancer.org 68 build thread http://67-72chevytrucks.com/vboard/s...d.php?t=223234



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.