![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
|
![]() |
#1 |
Retired Air Force Veteran
![]() Join Date: Aug 2007
Location: Pembroke Pines, Florida 33024
Posts: 1,808
|
Gauge Bezel Wiring Pig Tail
Are the Pig Tails for those Gauge Bezels that have three holes and those that have all 7 holes the same?
I re-wired using an after market (Rebel Wiring Harness). I am using a 3 hole Gauge set up and will use the pink (fuel) Light Blue (left turn dark blue (right turn) on the pig tail. Does anyone know what the color wires on the pig tail go to? 2 gray (same socket) light green brown black dark green tan tan dark blue Any help is great-full. Harry
__________________
Harry 69' SWB Step Side 1/2 Ton w/68' Front Clip Swap from Leafs to Trailing Arms (Complete) Swap 6 Lug to 5 Lug (w/ Disk Brakes in Front) 3/6 Drop ![]() Help Support The Board Click Here For Information On How To Subscribe Krue's FAQ Page Vendors |
![]() |
![]() |
![]() |
#2 |
Senior Member
![]() Join Date: Mar 2005
Location: weatherford,texas
Posts: 1,003
|
Re: Gauge Bezel Wiring Pig Tail
go to www.gmcpauls.com and look in the TIPS section. there is a wiring guide that will tell you what each wire/terminal goes to.....
|
![]() |
![]() |
![]() |
#3 |
Retired Air Force Veteran
![]() Join Date: Aug 2007
Location: Pembroke Pines, Florida 33024
Posts: 1,808
|
Re: Gauge Bezel Wiring Pig Tail
Thanks
__________________
Harry 69' SWB Step Side 1/2 Ton w/68' Front Clip Swap from Leafs to Trailing Arms (Complete) Swap 6 Lug to 5 Lug (w/ Disk Brakes in Front) 3/6 Drop ![]() Help Support The Board Click Here For Information On How To Subscribe Krue's FAQ Page Vendors |
![]() |
![]() |
![]() |
Bookmarks |
|
|