The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > General Forums > Alternate Tinkerings

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 09-11-2009, 01:17 PM   #1
nuke1
Registered User
 
nuke1's Avatar
 
Join Date: Jun 2007
Location: Saskatoon, Saskatchewan,:
Posts: 2,901
Talking 1969 Camaro "Yenko" Clone

Mods if i am not suppose to do this let me know. Thanks

Hey guys, My wifes uncle asked me if i could do his Camaro for him, He has had it for a number of years and wanted it done finally. Well in my experience all camaros are rusted out hulks. never seen a nice one. Well he brought id down to me on December 21st/08. I looked it over and my jaw dropped this thing is nice! Needs a few replacement panels but overall one sweet ride. He gives me all the paperwork for it and leaves. Well This thing has a BB LS7 in it, built by Neil Fedderly of fedderly racing engines, his brother Bernie is John Forces crew cheif. WOW. Well of course i got it running after sitting for a long time and WOW is all i can say. Just awesome. Anyways the plans for the car are as follow:

Replace all sheetmetal that is needed and do a few simple mods to it to clean up a few lines.

Have the drivetrain gone through and checked, even though it is fairly new, been sitting for a while.

All new suspension, lowered 2 inches, 4 wheel discs, tubular control ares, Guldstrand mod, DSE frame connectors, all around handling car.

Engine bay will be cleaned up, nothing fancy just clean.

Interior all original with gauges to check on the Beast and a steroe that is hidden.

Paint will be 69 camaro green with yenko strips.
Attached Images
     
__________________
James
1968 GMC "HAVOC"
1986 GMC "Frank"
J.J.R.H. Design & Consulting

My 68`Rebuild "HAVOC": http://67-72chevytrucks.com/vboard/s...d.php?t=316300
A 58' chev build thread: http://www.67-72chevytrucks.com/vboa...d.php?t=311238
1969 Camaro Pro Touring http://67-72chevytrucks.com/vboard/s...61#post3513361
Swiss Cheese: http://67-72chevytrucks.com/vboard/s...d.php?t=384390
Adjustable Trailing Arm How-To: http://67-72chevytrucks.com/vboard/s...d.php?t=321100
1968 Ford Farm Truck: http://67-72chevytrucks.com/vboard/s...=1#post6555587
nuke1 is offline   Reply With Quote
Old 09-11-2009, 01:44 PM   #2
nuke1
Registered User
 
nuke1's Avatar
 
Join Date: Jun 2007
Location: Saskatoon, Saskatchewan,:
Posts: 2,901
Re: 1969 Camaro "Yenko" Clone

Here is a vid, Sorry uncle Graham, i had to!
__________________
James
1968 GMC "HAVOC"
1986 GMC "Frank"
J.J.R.H. Design & Consulting

My 68`Rebuild "HAVOC": http://67-72chevytrucks.com/vboard/s...d.php?t=316300
A 58' chev build thread: http://www.67-72chevytrucks.com/vboa...d.php?t=311238
1969 Camaro Pro Touring http://67-72chevytrucks.com/vboard/s...61#post3513361
Swiss Cheese: http://67-72chevytrucks.com/vboard/s...d.php?t=384390
Adjustable Trailing Arm How-To: http://67-72chevytrucks.com/vboard/s...d.php?t=321100
1968 Ford Farm Truck: http://67-72chevytrucks.com/vboard/s...=1#post6555587
nuke1 is offline   Reply With Quote
Old 09-11-2009, 01:48 PM   #3
HuggerCST
Registered User
 
HuggerCST's Avatar
 
Join Date: Jul 2001
Location: North Louisiana
Posts: 4,501
Re: 1969 Camaro "Yenko" Clone

Nice project! Is this the color you're shooting for? This isn't his, but my brother in law is building a Yenko clone also, and was planning to go with the original dark green, almost black. Fathom green, is it? Anyway, his wife, (my sister) talked him into bright red instead. He hopes be be done by the end of the year.
Attached Images
 
__________________
Wynne
70 CST short fleet Hugger orange & white, 350/350, ps, pb, air, tilt, tach/vac/speedwarning, original buckets, AM/FM, oak bed floor, shoulder belts, 3.5"/5.5" drop, 20" American Racing VN425s.
Build thread
53 Chevy shortbed
69 Camaro

Click here to subscribe
Chevy GMC International Truck Club Louisiana Charter Member
http://www.louisianaclassictruckclub.com
HuggerCST is offline   Reply With Quote
Old 09-11-2009, 02:53 PM   #4
nuke1
Registered User
 
nuke1's Avatar
 
Join Date: Jun 2007
Location: Saskatoon, Saskatchewan,:
Posts: 2,901
Re: 1969 Camaro "Yenko" Clone

Quote:
Originally Posted by HuggerCST View Post
Nice project! Is this the color you're shooting for? This isn't his, but my brother in law is building a Yenko clone also, and was planning to go with the original dark green, almost black. Fathom green, is it? Anyway, his wife, (my sister) talked him into bright red instead. He hopes be be done by the end of the year.
The colore that he wants will be the brighter racing green, not sure of the code yet, do you have a couple of pics of the brothers, interested in seeing it?
__________________
James
1968 GMC "HAVOC"
1986 GMC "Frank"
J.J.R.H. Design & Consulting

My 68`Rebuild "HAVOC": http://67-72chevytrucks.com/vboard/s...d.php?t=316300
A 58' chev build thread: http://www.67-72chevytrucks.com/vboa...d.php?t=311238
1969 Camaro Pro Touring http://67-72chevytrucks.com/vboard/s...61#post3513361
Swiss Cheese: http://67-72chevytrucks.com/vboard/s...d.php?t=384390
Adjustable Trailing Arm How-To: http://67-72chevytrucks.com/vboard/s...d.php?t=321100
1968 Ford Farm Truck: http://67-72chevytrucks.com/vboard/s...=1#post6555587
nuke1 is offline   Reply With Quote
Old 09-11-2009, 03:53 PM   #5
HuggerCST
Registered User
 
HuggerCST's Avatar
 
Join Date: Jul 2001
Location: North Louisiana
Posts: 4,501
Re: 1969 Camaro "Yenko" Clone

Wow, I didn't think there was a 69 Camaro left with a trunk floor that nice. My brother in law's car body is at a body shop getting reworked, so I don't have any recent pics of it. The first pic is how it looked when he bought it. He is doing the frame, suspension, and 4 speed trans himself, and built the engine himself. It is a 496.
Attached Images
   
__________________
Wynne
70 CST short fleet Hugger orange & white, 350/350, ps, pb, air, tilt, tach/vac/speedwarning, original buckets, AM/FM, oak bed floor, shoulder belts, 3.5"/5.5" drop, 20" American Racing VN425s.
Build thread
53 Chevy shortbed
69 Camaro

Click here to subscribe
Chevy GMC International Truck Club Louisiana Charter Member
http://www.louisianaclassictruckclub.com
HuggerCST is offline   Reply With Quote
Old 09-11-2009, 05:39 PM   #6
nuke1
Registered User
 
nuke1's Avatar
 
Join Date: Jun 2007
Location: Saskatoon, Saskatchewan,:
Posts: 2,901
Re: 1969 Camaro "Yenko" Clone

Quote:
Originally Posted by HuggerCST View Post
Wow, I didn't think there was a 69 Camaro left with a trunk floor that nice. My brother in law's car body is at a body shop getting reworked, so I don't have any recent pics of it. The first pic is how it looked when he bought it. He is doing the frame, suspension, and 4 speed trans himself, and built the engine himself. It is a 496.
That is a nice looking car that he has there, 496, hmm the one here is punched to a 468. that front subrame looks real nice and clean. like that.
__________________
James
1968 GMC "HAVOC"
1986 GMC "Frank"
J.J.R.H. Design & Consulting

My 68`Rebuild "HAVOC": http://67-72chevytrucks.com/vboard/s...d.php?t=316300
A 58' chev build thread: http://www.67-72chevytrucks.com/vboa...d.php?t=311238
1969 Camaro Pro Touring http://67-72chevytrucks.com/vboard/s...61#post3513361
Swiss Cheese: http://67-72chevytrucks.com/vboard/s...d.php?t=384390
Adjustable Trailing Arm How-To: http://67-72chevytrucks.com/vboard/s...d.php?t=321100
1968 Ford Farm Truck: http://67-72chevytrucks.com/vboard/s...=1#post6555587
nuke1 is offline   Reply With Quote
Old 09-11-2009, 02:51 PM   #7
nuke1
Registered User
 
nuke1's Avatar
 
Join Date: Jun 2007
Location: Saskatoon, Saskatchewan,:
Posts: 2,901
Re: 1969 Camaro "Yenko" Clone

Previously someone had tried to repair this car, well, they did a real crappy job, the quarters were chicken crap welded, the tubs were siliconed on, the front fenders were welded and twisted horrible, you get the idea. a few more pics. More to come yet.
Attached Images
     
__________________
James
1968 GMC "HAVOC"
1986 GMC "Frank"
J.J.R.H. Design & Consulting

My 68`Rebuild "HAVOC": http://67-72chevytrucks.com/vboard/s...d.php?t=316300
A 58' chev build thread: http://www.67-72chevytrucks.com/vboa...d.php?t=311238
1969 Camaro Pro Touring http://67-72chevytrucks.com/vboard/s...61#post3513361
Swiss Cheese: http://67-72chevytrucks.com/vboard/s...d.php?t=384390
Adjustable Trailing Arm How-To: http://67-72chevytrucks.com/vboard/s...d.php?t=321100
1968 Ford Farm Truck: http://67-72chevytrucks.com/vboard/s...=1#post6555587
nuke1 is offline   Reply With Quote
Old 09-11-2009, 05:47 PM   #8
nuke1
Registered User
 
nuke1's Avatar
 
Join Date: Jun 2007
Location: Saskatoon, Saskatchewan,:
Posts: 2,901
Re: 1969 Camaro "Yenko" Clone

Some more disassembly pics of it. I was gonna put new door shells on it, but decided to just do skins, the structure was in just way too good of shape, the only reason i did the skins is the originals were holeized by a slide hammer at some point in its life, i did not want to fix that at all.
Attached Images
     
__________________
James
1968 GMC "HAVOC"
1986 GMC "Frank"
J.J.R.H. Design & Consulting

My 68`Rebuild "HAVOC": http://67-72chevytrucks.com/vboard/s...d.php?t=316300
A 58' chev build thread: http://www.67-72chevytrucks.com/vboa...d.php?t=311238
1969 Camaro Pro Touring http://67-72chevytrucks.com/vboard/s...61#post3513361
Swiss Cheese: http://67-72chevytrucks.com/vboard/s...d.php?t=384390
Adjustable Trailing Arm How-To: http://67-72chevytrucks.com/vboard/s...d.php?t=321100
1968 Ford Farm Truck: http://67-72chevytrucks.com/vboard/s...=1#post6555587
nuke1 is offline   Reply With Quote
Old 09-11-2009, 05:52 PM   #9
nuke1
Registered User
 
nuke1's Avatar
 
Join Date: Jun 2007
Location: Saskatoon, Saskatchewan,:
Posts: 2,901
Re: 1969 Camaro "Yenko" Clone

Finished the disassembly and brought her out to the farm, My wifes dad but also Tyler58's (Boardmember) dad for sandblasting. He had it there for a little while for me while i need the space, thanks Don. In june i picked it up and have not worked on it since, until last week i started on it, slowly i will be doin some on it until my arm heals fully.
Attached Images
     
__________________
James
1968 GMC "HAVOC"
1986 GMC "Frank"
J.J.R.H. Design & Consulting

My 68`Rebuild "HAVOC": http://67-72chevytrucks.com/vboard/s...d.php?t=316300
A 58' chev build thread: http://www.67-72chevytrucks.com/vboa...d.php?t=311238
1969 Camaro Pro Touring http://67-72chevytrucks.com/vboard/s...61#post3513361
Swiss Cheese: http://67-72chevytrucks.com/vboard/s...d.php?t=384390
Adjustable Trailing Arm How-To: http://67-72chevytrucks.com/vboard/s...d.php?t=321100
1968 Ford Farm Truck: http://67-72chevytrucks.com/vboard/s...=1#post6555587
nuke1 is offline   Reply With Quote
Old 09-11-2009, 05:55 PM   #10
nuke1
Registered User
 
nuke1's Avatar
 
Join Date: Jun 2007
Location: Saskatoon, Saskatchewan,:
Posts: 2,901
Re: 1969 Camaro "Yenko" Clone

This thing is nice, check out some of the following pics.
Attached Images
     
__________________
James
1968 GMC "HAVOC"
1986 GMC "Frank"
J.J.R.H. Design & Consulting

My 68`Rebuild "HAVOC": http://67-72chevytrucks.com/vboard/s...d.php?t=316300
A 58' chev build thread: http://www.67-72chevytrucks.com/vboa...d.php?t=311238
1969 Camaro Pro Touring http://67-72chevytrucks.com/vboard/s...61#post3513361
Swiss Cheese: http://67-72chevytrucks.com/vboard/s...d.php?t=384390
Adjustable Trailing Arm How-To: http://67-72chevytrucks.com/vboard/s...d.php?t=321100
1968 Ford Farm Truck: http://67-72chevytrucks.com/vboard/s...=1#post6555587
nuke1 is offline   Reply With Quote
Old 09-11-2009, 05:58 PM   #11
nuke1
Registered User
 
nuke1's Avatar
 
Join Date: Jun 2007
Location: Saskatoon, Saskatchewan,:
Posts: 2,901
Re: 1969 Camaro "Yenko" Clone

Just before i started tearing into it! Check out that rear diff cover, think something went KABOOM! Also that drivers floor hump, think someone decided a BFH was needed to fit something.
Attached Images
     
__________________
James
1968 GMC "HAVOC"
1986 GMC "Frank"
J.J.R.H. Design & Consulting

My 68`Rebuild "HAVOC": http://67-72chevytrucks.com/vboard/s...d.php?t=316300
A 58' chev build thread: http://www.67-72chevytrucks.com/vboa...d.php?t=311238
1969 Camaro Pro Touring http://67-72chevytrucks.com/vboard/s...61#post3513361
Swiss Cheese: http://67-72chevytrucks.com/vboard/s...d.php?t=384390
Adjustable Trailing Arm How-To: http://67-72chevytrucks.com/vboard/s...d.php?t=321100
1968 Ford Farm Truck: http://67-72chevytrucks.com/vboard/s...=1#post6555587

Last edited by nuke1; 09-11-2009 at 06:03 PM.
nuke1 is offline   Reply With Quote
Old 09-11-2009, 06:10 PM   #12
nuke1
Registered User
 
nuke1's Avatar
 
Join Date: Jun 2007
Location: Saskatoon, Saskatchewan,:
Posts: 2,901
Re: 1969 Camaro "Yenko" Clone

Here is a bunch of the parts that i have gotten for the car so far, all the new metal, all of the suspension parts for it and the DSE subframe connectors. I had gotten some rims for it, some 18" coys, but His boys decided they needed them for his 72 MonteCarlo.
Attached Images
     
__________________
James
1968 GMC "HAVOC"
1986 GMC "Frank"
J.J.R.H. Design & Consulting

My 68`Rebuild "HAVOC": http://67-72chevytrucks.com/vboard/s...d.php?t=316300
A 58' chev build thread: http://www.67-72chevytrucks.com/vboa...d.php?t=311238
1969 Camaro Pro Touring http://67-72chevytrucks.com/vboard/s...61#post3513361
Swiss Cheese: http://67-72chevytrucks.com/vboard/s...d.php?t=384390
Adjustable Trailing Arm How-To: http://67-72chevytrucks.com/vboard/s...d.php?t=321100
1968 Ford Farm Truck: http://67-72chevytrucks.com/vboard/s...=1#post6555587
nuke1 is offline   Reply With Quote
Old 09-11-2009, 06:12 PM   #13
nuke1
Registered User
 
nuke1's Avatar
 
Join Date: Jun 2007
Location: Saskatoon, Saskatchewan,:
Posts: 2,901
Re: 1969 Camaro "Yenko" Clone

Yah i know, my basement looks like crap, parts everywhere and such, but soon they will be gone and the basement renovated!
Attached Images
    
__________________
James
1968 GMC "HAVOC"
1986 GMC "Frank"
J.J.R.H. Design & Consulting

My 68`Rebuild "HAVOC": http://67-72chevytrucks.com/vboard/s...d.php?t=316300
A 58' chev build thread: http://www.67-72chevytrucks.com/vboa...d.php?t=311238
1969 Camaro Pro Touring http://67-72chevytrucks.com/vboard/s...61#post3513361
Swiss Cheese: http://67-72chevytrucks.com/vboard/s...d.php?t=384390
Adjustable Trailing Arm How-To: http://67-72chevytrucks.com/vboard/s...d.php?t=321100
1968 Ford Farm Truck: http://67-72chevytrucks.com/vboard/s...=1#post6555587
nuke1 is offline   Reply With Quote
Old 09-11-2009, 06:16 PM   #14
nuke1
Registered User
 
nuke1's Avatar
 
Join Date: Jun 2007
Location: Saskatoon, Saskatchewan,:
Posts: 2,901
Re: 1969 Camaro "Yenko" Clone

Well this is where i started a few days ago, got the inner tub cut out and the rocker off, also the quarter drop box, once all was take out i cleaned it all up and fit the rocker and then used U-POL's copper weld thru primer for it.
Attached Images
     
__________________
James
1968 GMC "HAVOC"
1986 GMC "Frank"
J.J.R.H. Design & Consulting

My 68`Rebuild "HAVOC": http://67-72chevytrucks.com/vboard/s...d.php?t=316300
A 58' chev build thread: http://www.67-72chevytrucks.com/vboa...d.php?t=311238
1969 Camaro Pro Touring http://67-72chevytrucks.com/vboard/s...61#post3513361
Swiss Cheese: http://67-72chevytrucks.com/vboard/s...d.php?t=384390
Adjustable Trailing Arm How-To: http://67-72chevytrucks.com/vboard/s...d.php?t=321100
1968 Ford Farm Truck: http://67-72chevytrucks.com/vboard/s...=1#post6555587
nuke1 is offline   Reply With Quote
Old 09-11-2009, 06:21 PM   #15
nuke1
Registered User
 
nuke1's Avatar
 
Join Date: Jun 2007
Location: Saskatoon, Saskatchewan,:
Posts: 2,901
Re: 1969 Camaro "Yenko" Clone

This is where it is at as of now, the rocker welded in, the rear tubs just sitting there until i get the quarters fit on, that way they are a perfect fit! Just check out that weld on the rear valance, what a weld, gotta love when someone does that.
Attached Images
     
__________________
James
1968 GMC "HAVOC"
1986 GMC "Frank"
J.J.R.H. Design & Consulting

My 68`Rebuild "HAVOC": http://67-72chevytrucks.com/vboard/s...d.php?t=316300
A 58' chev build thread: http://www.67-72chevytrucks.com/vboa...d.php?t=311238
1969 Camaro Pro Touring http://67-72chevytrucks.com/vboard/s...61#post3513361
Swiss Cheese: http://67-72chevytrucks.com/vboard/s...d.php?t=384390
Adjustable Trailing Arm How-To: http://67-72chevytrucks.com/vboard/s...d.php?t=321100
1968 Ford Farm Truck: http://67-72chevytrucks.com/vboard/s...=1#post6555587
nuke1 is offline   Reply With Quote
Old 09-11-2009, 08:35 PM   #16
sourkraut
Registered User
 
sourkraut's Avatar
 
Join Date: Sep 2008
Location: WI
Posts: 1,243
Re: 1969 Camaro "Yenko" Clone

love the garage burnout! when will we ever grow up!!!!!
__________________
"The way it is" truck build
http://67-72chevytrucks.com/vboard/s...d.php?t=359200




sourkraut is offline   Reply With Quote
Old 09-11-2009, 10:16 PM   #17
ksbrktracer
TNT-MOTORSPORTS
 
ksbrktracer's Avatar
 
Join Date: Mar 2008
Location: TULSA OKLAHOMA
Posts: 2,692
Re: 1969 Camaro "Yenko" Clone

I have to say I aint never growin up....I also liked the garage burnout to. Looks like you have your hands full Nuke, Ive got a 67 I am working on myself, Someday I will get to my 69 camaro 56k miles, r-s s-s with no rust, came from Phoenix az, had it since I was 15, has a ton of options and a-c to boot. They had several different Greens back then , the really Dark green was Fathom green, Light green was Frost green and then they had a bright green called Rally green ( I think that is the correct name) kind of a bright grass green , In 68 they also had a British racing green, very dark also. My favorite would be the Rally Green tho....
Keep postin updates as you go........Good luck
ksbrktracer is offline   Reply With Quote
Old 09-12-2009, 12:29 AM   #18
nuke1
Registered User
 
nuke1's Avatar
 
Join Date: Jun 2007
Location: Saskatoon, Saskatchewan,:
Posts: 2,901
Re: 1969 Camaro "Yenko" Clone

Quote:
Originally Posted by sourkraut View Post
love the garage burnout! when will we ever grow up!!!!!
Quote:
Originally Posted by ksbrktracer View Post
I have to say I aint never growin up....I also liked the garage burnout to. Looks like you have your hands full Nuke, Ive got a 67 I am working on myself, Someday I will get to my 69 camaro 56k miles, r-s s-s with no rust, came from Phoenix az, had it since I was 15, has a ton of options and a-c to boot. They had several different Greens back then , the really Dark green was Fathom green, Light green was Frost green and then they had a bright green called Rally green ( I think that is the correct name) kind of a bright grass green , In 68 they also had a British racing green, very dark also. My favorite would be the Rally Green tho....
Keep postin updates as you go........Good luck
Hey guys, as far as i know, i never want to grow up, have fun till the big man in the sky comes for me!, That is a highly optioned car you have there, better keep that under lock and key or i will have to come and hunt it down for myself, The color is the 69 Rally green, you are right. thanks. And do not worry i will keep posting updates as they are done. Later guys.
__________________
James
1968 GMC "HAVOC"
1986 GMC "Frank"
J.J.R.H. Design & Consulting

My 68`Rebuild "HAVOC": http://67-72chevytrucks.com/vboard/s...d.php?t=316300
A 58' chev build thread: http://www.67-72chevytrucks.com/vboa...d.php?t=311238
1969 Camaro Pro Touring http://67-72chevytrucks.com/vboard/s...61#post3513361
Swiss Cheese: http://67-72chevytrucks.com/vboard/s...d.php?t=384390
Adjustable Trailing Arm How-To: http://67-72chevytrucks.com/vboard/s...d.php?t=321100
1968 Ford Farm Truck: http://67-72chevytrucks.com/vboard/s...=1#post6555587
nuke1 is offline   Reply With Quote
Old 09-16-2009, 01:20 PM   #19
jb1016
"Oh well, it's a driver."
 
jb1016's Avatar
 
Join Date: Jul 2008
Location: Nashville, TN
Posts: 3,467
Re: 1969 Camaro "Yenko" Clone

Subscribed. I know I'm hardly unique in this, but I am such a fiend for 69 camaros. I liked watching that pencil roll around on top of the fender while you were revving it up.
__________________
- JB - '93 C1500 SHORT/FLEET SILVERADO, 350/4L60E

Quote:
Originally Posted by Tom Petty
I don't know, but I've been told: You never slow down, you never grow old.
jb1016 is offline   Reply With Quote
Old 09-30-2009, 02:23 PM   #20
FRENCHBLUE72
PROJECT 7DEUCE
 
FRENCHBLUE72's Avatar
 
Join Date: Dec 2002
Location: GRANTS PASS OR
Posts: 21,608
Re: 1969 Camaro "Yenko" Clone

Very cool love the old camaros.
__________________
GO BIG GREEN GO DUCKS



MEMBER #6377

72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free.

Project "7DEUCE"

check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665



Tim Powell..R.I.P EastSideLowlife..... R.I.P..
FRENCHBLUE72 is offline   Reply With Quote
Old 10-02-2009, 10:05 PM   #21
jgh64pkup
Sunburst C10!!!
 
jgh64pkup's Avatar
 
Join Date: Jan 2009
Location: Texas
Posts: 2,560
Re: 1969 Camaro "Yenko" Clone

cool build cant wait to see more
__________________
Gage
1967 C10 Shortbed Stepside
jgh64pkup is offline   Reply With Quote
Old 10-05-2009, 01:17 AM   #22
nuke1
Registered User
 
nuke1's Avatar
 
Join Date: Jun 2007
Location: Saskatoon, Saskatchewan,:
Posts: 2,901
Re: 1969 Camaro "Yenko" Clone

Quote:
Originally Posted by FRENCHBLUE72 View Post
Very cool love the old camaros.
Quote:
Originally Posted by jgh64pkup View Post
cool build cant wait to see more
Thanks guys, there will be progress this week thou. I did however get tthe engine off the the Engine Builder, my great friend Cory, he also helped build my engine for my truck, so i hope he knows a thing or two about them, Just kidding Cory. he did find a few issues so far with it thou. So Graham if you are reading this , i will talk to you in a bit. Needs a baseplate and rebuild on the carb, a couple pushrods are the wrong lenght and kind, timing chain is stretched, and the lifters and cam are rusty. Also two cylinders have leakdown in the chambers. But that is not that bad. the rest so far seems really good. Here are a few pics for you guys,

Later James
Attached Images
     
__________________
James
1968 GMC "HAVOC"
1986 GMC "Frank"
J.J.R.H. Design & Consulting

My 68`Rebuild "HAVOC": http://67-72chevytrucks.com/vboard/s...d.php?t=316300
A 58' chev build thread: http://www.67-72chevytrucks.com/vboa...d.php?t=311238
1969 Camaro Pro Touring http://67-72chevytrucks.com/vboard/s...61#post3513361
Swiss Cheese: http://67-72chevytrucks.com/vboard/s...d.php?t=384390
Adjustable Trailing Arm How-To: http://67-72chevytrucks.com/vboard/s...d.php?t=321100
1968 Ford Farm Truck: http://67-72chevytrucks.com/vboard/s...=1#post6555587
nuke1 is offline   Reply With Quote
Old 10-05-2009, 01:19 AM   #23
nuke1
Registered User
 
nuke1's Avatar
 
Join Date: Jun 2007
Location: Saskatoon, Saskatchewan,:
Posts: 2,901
Re: 1969 Camaro "Yenko" Clone

Double post
__________________
James
1968 GMC "HAVOC"
1986 GMC "Frank"
J.J.R.H. Design & Consulting

My 68`Rebuild "HAVOC": http://67-72chevytrucks.com/vboard/s...d.php?t=316300
A 58' chev build thread: http://www.67-72chevytrucks.com/vboa...d.php?t=311238
1969 Camaro Pro Touring http://67-72chevytrucks.com/vboard/s...61#post3513361
Swiss Cheese: http://67-72chevytrucks.com/vboard/s...d.php?t=384390
Adjustable Trailing Arm How-To: http://67-72chevytrucks.com/vboard/s...d.php?t=321100
1968 Ford Farm Truck: http://67-72chevytrucks.com/vboard/s...=1#post6555587

Last edited by nuke1; 10-05-2009 at 01:21 AM.
nuke1 is offline   Reply With Quote
Old 10-05-2009, 01:20 AM   #24
nuke1
Registered User
 
nuke1's Avatar
 
Join Date: Jun 2007
Location: Saskatoon, Saskatchewan,:
Posts: 2,901
Re: 1969 Camaro "Yenko" Clone

A few more pics, BTW Regulators mount up, that is Cory`s drag bike team, they run around 7`s in the quarter. Sorry cory, had to put a pic of your mug in here.
Attached Images
   
__________________
James
1968 GMC "HAVOC"
1986 GMC "Frank"
J.J.R.H. Design & Consulting

My 68`Rebuild "HAVOC": http://67-72chevytrucks.com/vboard/s...d.php?t=316300
A 58' chev build thread: http://www.67-72chevytrucks.com/vboa...d.php?t=311238
1969 Camaro Pro Touring http://67-72chevytrucks.com/vboard/s...61#post3513361
Swiss Cheese: http://67-72chevytrucks.com/vboard/s...d.php?t=384390
Adjustable Trailing Arm How-To: http://67-72chevytrucks.com/vboard/s...d.php?t=321100
1968 Ford Farm Truck: http://67-72chevytrucks.com/vboard/s...=1#post6555587
nuke1 is offline   Reply With Quote
Old 10-05-2009, 02:28 AM   #25
nuke1
Registered User
 
nuke1's Avatar
 
Join Date: Jun 2007
Location: Saskatoon, Saskatchewan,:
Posts: 2,901
Re: 1969 Camaro "Yenko" Clone

A little inspiration!!!!
Attached Images
     
__________________
James
1968 GMC "HAVOC"
1986 GMC "Frank"
J.J.R.H. Design & Consulting

My 68`Rebuild "HAVOC": http://67-72chevytrucks.com/vboard/s...d.php?t=316300
A 58' chev build thread: http://www.67-72chevytrucks.com/vboa...d.php?t=311238
1969 Camaro Pro Touring http://67-72chevytrucks.com/vboard/s...61#post3513361
Swiss Cheese: http://67-72chevytrucks.com/vboard/s...d.php?t=384390
Adjustable Trailing Arm How-To: http://67-72chevytrucks.com/vboard/s...d.php?t=321100
1968 Ford Farm Truck: http://67-72chevytrucks.com/vboard/s...=1#post6555587
nuke1 is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 02:52 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com