crossmember measurement? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Stout Racing · 07-22-2006, 09:00 PM

hey guys i didnt get a reply the last one lol can someone please measure where thier auto xmember for a 350/TH400 setup is on a LWB frame cause i need to bolt mine back in and i dont know where to put it cause the engine and transmission arnt ready to go into the frame yet

thanks

Stout Racing · 07-23-2006, 03:23 AM

ttt

RSRXION · 07-23-2006, 07:44 AM

There's no need to bolt it in now. I just waited until I slid the motor and trans in together, put the bolts in the motor mounts, jack the trans up with a floor jack and a piece of wood under the trans pan and then start the bolts into the trans mount through the crossmember. You'll then see exactly where the bolts need to go in the pre-stamped stock holes for proper crossmember location. I'll take some pics if you like but it'll be a couple of days. I'm on a 48 sour tour at the FD and I don't get off work until Tuesday. Incidentally I used a 76 TH-400 trans and crossmember in my 72 C-30. Good luck, Dean

Stout Racing · 07-23-2006, 01:06 PM

awesome ya some pics would def help thanx man

07-22-2006, 09:00 PM	#1
Stout Racing Registered User Join Date: Mar 2006 Location: British Columbia Posts: 36	crossmember measurement? hey guys i didnt get a reply the last one lol can someone please measure where thier auto xmember for a 350/TH400 setup is on a LWB frame cause i need to bolt mine back in and i dont know where to put it cause the engine and transmission arnt ready to go into the frame yet thanks __________________ Stout Racing a Division of Disciples Performance

07-23-2006, 03:23 AM	#2
Stout Racing Registered User Join Date: Mar 2006 Location: British Columbia Posts: 36	Re: crossmember measurement? ttt __________________ Stout Racing a Division of Disciples Performance

07-23-2006, 07:44 AM	#3
RSRXION Senior Member Join Date: Jun 2006 Location: Arkansas Posts: 227	Re: crossmember measurement? There's no need to bolt it in now. I just waited until I slid the motor and trans in together, put the bolts in the motor mounts, jack the trans up with a floor jack and a piece of wood under the trans pan and then start the bolts into the trans mount through the crossmember. You'll then see exactly where the bolts need to go in the pre-stamped stock holes for proper crossmember location. I'll take some pics if you like but it'll be a couple of days. I'm on a 48 sour tour at the FD and I don't get off work until Tuesday. Incidentally I used a 76 TH-400 trans and crossmember in my 72 C-30. Good luck, Dean

07-23-2006, 01:06 PM	#4
Stout Racing Registered User Join Date: Mar 2006 Location: British Columbia Posts: 36	Re: crossmember measurement? awesome ya some pics would def help thanx man __________________ Stout Racing a Division of Disciples Performance



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.