|
|
|
06-25-2020, 06:29 PM
|
#1 |
|
Registered User
Join Date: Jun 2007
Location: Everest Ks
Posts: 749
|
1980 Sending Unit
Need to replace this sending unit 1980 K10 manual transmission. can I run a single tube sending unit or do I need a 2 or 3 tube? The smaller line runs to the front of the truck and is cut and crimped off. The other larger line runs up to the charcoal canister and is the only line hooked up to the canister. And of course the other line is the fuel supply line to the pump. Since basically 2 of the lines are not really connected to anything I dont see what it would hurt to use a single line sending unit. just would like some input before I order a new one. Thanks
__________________
1970 Chevelle Nomad station wagon 1966 C-10 lwb,250-six,granny 4speed  1966 C-10 lwb,factory A/C,Custom Cab 1954 Delray 2-door sedan [rat rod project]
|
|
|
|
06-25-2020, 08:44 PM
|
#2 | |
|
Registered User
Join Date: Sep 2019
Location: Scottsdale Arizona
Posts: 114
|
Re: 1980 Sending Unit
Quote:
|
|
|
|
|
|
06-25-2020, 09:53 PM
|
#3 |
|
Registered User
Join Date: May 2012
Location: horseheads,ny rust belt
Posts: 2,794
|
Re: 1980 Sending Unit
3/8" - suction
5/16" - return 1/4" vent line if using 1 single line and rest capped off make sure the cap is vented or you will build up a vac in the tank and have fuel feed problems.
__________________
77-k30lb BIG truck build . 87-k30lb budget beater build . 85-k30lb the plow machine build . 85-c10sb summer fun toy . ----------------------------- HOLLEY SNIPER efi = worst case of p.i.t.a i ever had . EDELBROCK pro flo 4 = best deal going so far . love my setup works great. |
|
|
|
 |
| Bookmarks |
|
|
Hybrid Mode
