|
|
|
12-11-2007, 06:44 PM
|
#1 |
|
Senior Member
Join Date: Aug 2005
Location: tulsa OK
Posts: 3,070
|
project INCREDIBLE HULK 6.2L with 6L80E
here is what i started with a clean (from the outside) 71 c-10 longbed.......plans are much like the other projects ive done....
http://67-72chevytrucks.com/vboard/s...d.php?t=195643 http://67-72chevytrucks.com/vboard/s...d.php?t=244448 this one will be transformed from a LWB to a SWB with a GEN IV engine, new everything, and a fancy interior  ...here are a few pics of day 1 of the progress..        
Last edited by 68 short step; 01-10-2008 at 03:59 PM. |
|
|
|
12-11-2007, 06:49 PM
|
#2 |
|
Senior Member
Join Date: Aug 2005
Location: tulsa OK
Posts: 3,070
|
Re: project INCREDABLE HULK
         
Last edited by 68 short step; 01-10-2008 at 04:00 PM. |
|
|
|
|
12-11-2007, 06:49 PM
|
#3 |
|
Senior Member
Join Date: Aug 2005
Location: tulsa OK
Posts: 3,070
|
Re: project INCREDABLE HULK
Last edited by 68 short step; 01-10-2008 at 04:02 PM. |
|
|
|
|
12-11-2007, 06:55 PM
|
#4 |
|
BlahBlahBlah
Join Date: Feb 2002
Location: Wa.
Posts: 19,980
|
Re: project INCREDABLE HULK
Rockers looked pretty good in the first couple of pics....and went way down hill from there.
|
|
|
|
|
12-11-2007, 06:56 PM
|
#5 |
|
Registered User
Join Date: Nov 2007
Location: oklahoma
Posts: 50
|
Re: project INCREDABLE HULK
WOW....worse than we thought ehh??
but looks like your headed in the right direction! |
|
|
|
|
12-11-2007, 07:09 PM
|
#6 | |
|
Senior Member
Join Date: Aug 2005
Location: tulsa OK
Posts: 3,070
|
Re: project INCREDABLE HULK
Quote:
Last edited by 68 short step; 12-11-2007 at 07:09 PM. |
|
|
|
|
|
12-12-2007, 08:18 AM
|
#7 |
|
Registered User
Join Date: Aug 2007
Location: Owasso, OK
Posts: 44
|
Re: project INCREDIBLE HULK
its "anticipated" :P
Looks like you really got your work cut out for you this time! |
|
|
|
|
12-12-2007, 09:41 AM
|
#8 |
|
PITbut
Join Date: Sep 2007
Location: monroe washington
Posts: 3,052
|
Re: project INCREDIBLE HULK
In for progress....
|
|
|
|
|
12-12-2007, 03:00 PM
|
#9 |
|
Registered User
Join Date: Aug 2007
Location: Owasso, OK
Posts: 44
|
Re: project INCREDIBLE HULK
I see a 400 badge on there. This would be perfect for a 402 LS2 powerplant!
|
|
|
|
|
01-03-2008, 06:17 AM
|
#10 |
|
Senior Member
Join Date: Aug 2005
Location: tulsa OK
Posts: 3,070
|
Re: project INCREDIBLE HULK
ok here is a little update... i havent got a super lot done cause i had surgery and been kinda taken it easy...but here is some progress non-the-less.
welded in the big peice of the firewall, did away with the mystery 'bump' on the firewall, welded in the round peice for the blower motor, still some final weld grinding i need to do, but you get the idea.....enjoy, and im feelin better so i can getta work on the hulk again...    
Last edited by 68 short step; 01-10-2008 at 04:03 PM. |
|
|
|
|
01-03-2008, 06:31 AM
|
#11 |
|
Senior Member
Join Date: Jul 2005
Location: Winters Ca. 95694
Posts: 4,843
|
Re: project INCREDIBLE HULK
Wow it took you since last year to duct tape a piece of metal to teh fire wall! And you started out so well!!
 Happy NewYear you are off to a great start on that truck. The first out side pic looked great but as well all know it is whats on the inside that causes all the work. Are you going with new bed sides or are you going to cut down the long bed sides? Kevin LFD Inc. |
|
|
|
|
01-03-2008, 06:45 AM
|
#12 |
|
Senior Member
Join Date: Aug 2005
Location: tulsa OK
Posts: 3,070
|
Re: project INCREDIBLE HULK
the bedsides will be good solid (fingerscrossed) orignal shortbed ones....with new aftermarket tubs, cross seals, (possibly) front bed pnl, and a nice wooden bed......it has a nice longbed that im sure 71HULK will post it for sell, if he chooses..
SLAMMED1 thats what we'll be doing too, i agree it doesnt look right just left un-symetrical....we'll also be capping the wire gutter, like rokcrln does (but not a 45* slant) |
|
|
|
|
01-03-2008, 06:42 AM
|
#13 |
|
Registered User
Join Date: May 2006
Location: at work
Posts: 2,552
|
Re: project INCREDIBLE HULK
gonna make another customer happy i see!!!
__________________
R.I.P. Killer 71 10/26/07 |
|
|
|
|
01-03-2008, 06:48 AM
|
#14 | |
|
Senior Member
Join Date: Aug 2005
Location: tulsa OK
Posts: 3,070
|
Re: project INCREDIBLE HULK
Quote:
|
|
|
|
|
|
01-03-2008, 06:52 AM
|
#15 |
|
Registered User
Join Date: May 2006
Location: at work
Posts: 2,552
|
Re: project INCREDIBLE HULK
so how soon can u be through already with this hulk dude...
i've been ready!
__________________
R.I.P. Killer 71 10/26/07 |
|
|
|
|
01-03-2008, 07:02 AM
|
#16 |
|
1972 Chevrolet SWB
Join Date: Jan 2008
Location: FT Smith AR
Posts: 512
|
Re: project INCREDIBLE HULK
Nice ride killer71,my 72 would have been decked out like yours with all the stock trim and all but a small accident of me backing my Jeep Wagoneer into the frt of the truck and ruining a pristine 72 grille shell beyond repair. I found a 68 complete frt clip rust free for 50.00 when the 71/72 outer shells at the time were well over 300.00 alone. Yours is done very nicely,props to you.
68shortstep, that truck was a 25 footer for sure after seeing the damage you found........the on the trailer picture made the truck look like it was a cherry.
__________________
My New thread with pics (not my build thread yet.) http://67-72chevytrucks.com/vboard/s...46#post2573646 1972 Chevrolet 1/2 ton short wide bed,68 frt clip Project. 1980 Camaro Inherited when father passed,68K Miles 2003 Ford Mach1 FUN as Hell!! 2002 Dodge Ram 5-8 slam Rolling BillBoard (Gone not forgot) 2004 Dodge Ram HEMI 10" lifted on 37's and 2wd. |
|
|
|
|
01-03-2008, 01:20 PM
|
#17 |
|
Registered User
Join Date: Nov 2007
Location: oklahoma
Posts: 50
|
Re: project INCREDIBLE HULK
Hey who's in charge of the shop grounds...I don't like all of that clutter over there on the left! Tell the boss to get it cleaned up so we'll have room for some parts!
 
|
|
|
|
|
01-03-2008, 01:32 PM
|
#18 | |
|
Senior Member
Join Date: Aug 2005
Location: tulsa OK
Posts: 3,070
|
Re: project INCREDIBLE HULK
Quote:
ill inform the shop keeper
|
|
|
|
|
|
01-03-2008, 02:44 PM
|
#19 |
|
Registered User
Join Date: Dec 2007
Location: Van Buren Arkansas
Posts: 137
|
Re: project INCREDIBLE HULK
I would be interested in the long bedsides...I live off I-40 at the OK/AR LINE
|
|
|
|
|
01-03-2008, 04:01 PM
|
#20 | |
|
Registered User
Join Date: Nov 2007
Location: oklahoma
Posts: 50
|
Re: project INCREDIBLE HULK
Quote:
Hey Charlie Brown you have PM |
|
|
|
|
|
01-03-2008, 04:05 PM
|
#21 |
|
Registered User
Join Date: Aug 2007
Location: pittsburgh pa
Posts: 1,970
|
Re: project INCREDIBLE HULK
Wow.... Looks like a great start.... What is your plan for the finished project?? Colors? suspension?? I dig the colors now...
Welcome to the boards 71Hulk!! Its a great place to be when building a truck...
__________________
68 C10 Shorty TPI,Bagged, and all the good stuff. Classic trucks feature June 06, On the cover of Jegs Christmas Catalog 08 67 C10 Shorty Shop truck project Bagged and Z'd under destruction and getting nowhere fast. 64 C10 Shop Truck/Daily driver, Bagged, Dropmember, SOLD!!!! Gone but not forgotten.. 54 GMC under the knife getting a S10 chassis swap and bagged. See my build thread... 07 GMC Sierra 5/7 drop, 22's and 24's Air ride on my mind.. http://67-72chevytrucks.com/vboard/s...d.php?t=339340 See pics of my trucks in my profile |
|
|
|
|
01-03-2008, 01:28 PM
|
#22 |
|
Senior Member
Join Date: Aug 2005
Location: tulsa OK
Posts: 3,070
|
Re: project INCREDIBLE HULK
todays progress was cut out some more rusted metal... the flange that the peice was spot welded to was corroded on the bend.. so it was cut out and is gonna get a new peice..... also i started to lay down some body filler ( still need to sand it)... once i get the filler level ill prime that area and start with makeing the cab symetrical.... here are a few pics
    
Last edited by 68 short step; 01-10-2008 at 04:03 PM. |
|
|
|
|
01-03-2008, 04:26 PM
|
#23 |
|
Registered User
Join Date: Nov 2007
Location: oklahoma
Posts: 50
|
Re: project INCREDIBLE HULK
Well don't stop now your doin a fine job. your even maken me get exicted!
|
|
|
|
|
01-03-2008, 04:39 PM
|
#24 |
|
Senior Member
Join Date: Aug 2005
Location: tulsa OK
Posts: 3,070
|
Re: project INCREDIBLE HULK
new custom interior, late model SUV guage cluster, GPS, DVD, 8" touchscreen monitor, with a few more cool features....still desiding what powerplant we're getting, but leaning towards either the L92 6.2L/
6l80e or the LS7 7.0L with either the 4l60e or 6l80e trans.... it'll have all the creature comforts (heat, A/C, sound system or should i say mobile entertainment center) colors will be two tone, orangeish/ white.......and some SWEET wheels ( ill keep that a secret till they're on).....hope i didnt spill too much... |
|
|
|
|
01-03-2008, 04:43 PM
|
#25 |
|
Registered User
Join Date: Aug 2007
Location: pittsburgh pa
Posts: 1,970
|
Re: project INCREDIBLE HULK
 Wow.... Whats the projected completion time on such an undertaking?
__________________
68 C10 Shorty TPI,Bagged, and all the good stuff. Classic trucks feature June 06, On the cover of Jegs Christmas Catalog 08 67 C10 Shorty Shop truck project Bagged and Z'd under destruction and getting nowhere fast. 64 C10 Shop Truck/Daily driver, Bagged, Dropmember, SOLD!!!! Gone but not forgotten.. 54 GMC under the knife getting a S10 chassis swap and bagged. See my build thread... 07 GMC Sierra 5/7 drop, 22's and 24's Air ride on my mind.. http://67-72chevytrucks.com/vboard/s...d.php?t=339340 See pics of my trucks in my profile |
|
|
|
 |
| Bookmarks |
|
|
Hybrid Mode
