What seats work - The 1947 - Present Chevrolet & GMC Truck Message Board Network

CARR33 · 02-26-2010, 11:57 AM

I want to replace the bensh seat in my 67 1/2 ton with a bucket seat assy out of something fairly new. Most i've looked at have a small console that i would like to remove. Any ideas?

Slick67 · 02-26-2010, 01:02 PM

I just purchased a set of 88 to 91 Chevy buckets. They are stand alone seats with no console and fit well, if you are looking for lowback buckets. They will look much better when covered!

Name: seat1.jpg
Views: 329
Size: 28.7 KB

Name: seat1.jpg
Views: 329
Size: 28.7 KB

RED67 · 02-26-2010, 03:18 PM

what frames did you use to mount seats??

RED67 · 02-27-2010, 11:32 PM

ttt

Danny Bost · 02-28-2010, 10:01 AM

I just posted this on another thread on here, but here is what I did. I took power seats out of a 02 Dodge Intrepid. The power controls are in the seat so it is only two wires to hook them up. I am bolting down a piece of 3" square tubing to the floor and mounting the seats to that so that they sit a bit higher. It is a very easy install. The sholder harness are also easy to install so that everything works together. I am leaving the headrests on mine, but they could be removed if you don't want them on there. I am going to build my own console for the set up. I don't have pictures, but I can get some if you would like.

02-26-2010, 11:57 AM	#1
CARR33 Registered User Join Date: Jan 2010 Location: HAMPSTEAD,MD Posts: 94	What seats work I want to replace the bensh seat in my 67 1/2 ton with a bucket seat assy out of something fairly new. Most i've looked at have a small console that i would like to remove. Any ideas?

02-26-2010, 01:02 PM	#2
Slick67 Sofa King Crazy!! Join Date: Oct 2008 Location: Houston, TX Posts: 3,090	Re: What seats work I just purchased a set of 88 to 91 Chevy buckets. They are stand alone seats with no console and fit well, if you are looking for lowback buckets. They will look much better when covered! __________________ You found the Tater. *My Blazer Build (New)* - http://67-72chevytrucks.com/vboard/s...d.php?t=654650 *My 67 Build* - http://67-72chevytrucks.com/vboard/s...d.php?t=335650 67 Chevy LWB big window a/c AKA TOTALLED BY A JACKASS. 1972 2wd Blazer "Porterbuilt and Sloshed"

02-26-2010, 03:18 PM	#3
RED67 Forever Grateful Join Date: Mar 2001 Location: Forney,Texas Posts: 779	Re: What seats work what frames did you use to mount seats?? __________________ R.I.P Dad 04-07-42 - 05-27-09

02-27-2010, 11:32 PM	#4
RED67 Forever Grateful Join Date: Mar 2001 Location: Forney,Texas Posts: 779	Re: What seats work ttt __________________ R.I.P Dad 04-07-42 - 05-27-09

02-28-2010, 10:01 AM	#5
Danny Bost Registered User Join Date: Dec 2009 Location: Aztec NM Posts: 229	Re: What seats work I just posted this on another thread on here, but here is what I did. I took power seats out of a 02 Dodge Intrepid. The power controls are in the seat so it is only two wires to hook them up. I am bolting down a piece of 3" square tubing to the floor and mounting the seats to that so that they sit a bit higher. It is a very easy install. The sholder harness are also easy to install so that everything works together. I am leaving the headrests on mine, but they could be removed if you don't want them on there. I am going to build my own console for the set up. I don't have pictures, but I can get some if you would like. __________________ Danny 71 SWB



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.