![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
|
![]() |
#1 |
I Love This Stuff!
Join Date: May 2002
Location: Winnipeg, Manitoba, Canada
Posts: 739
|
![]()
I'm in the process of tearing apart my truck and I am stuck trying to tke the guages out. I removed all of the screws around the perimeter on the guage panel. How do I get the choke, wiper, and light knobs off? what else is holding the guages onto the dash?
Thank You Guys!! JHickson6 ![]()
__________________
My Rides 1967 C10 In Pieces for now ![]() 1985 Ford B700 SourPuss Bus - BIG BLUE 2003 Silverado CITY WORKER YELLOW!! |
![]() |
![]() |
![]() |
#2 |
Account Suspended
Join Date: May 2002
Location: Olathe, Kansas
Posts: 929
|
You'll need to take a small screw driver or pick and pull back on the tab (just at the base of the knob's) then remove the 2 retaining nuts for the choke/headlight switch.
If you have a small mirror you can pull the headlight switch on and look behind the knob, you will see a tab sticking out around the base of the knob. |
![]() |
![]() |
![]() |
#3 |
Registered User
![]() Join Date: Dec 2001
Location: Pace, FL
Posts: 2,155
|
The wiper knob has a set screw. Unscrew it with a small screwdriver, loosen it so you can pull the knob off. For the lights, pull it out to parklights, reach up behind, push the tab down and pull out. I had the same problem a few weeks ago.
__________________
1942 Master Deluxe 1969 C/10 1985 Blazer CUCV 1987 Jimmy 2004 Tahoe 2005 Silverado 1500 2005 Silverado 3500 |
![]() |
![]() |
![]() |
#4 |
I Love This Stuff!
Join Date: May 2002
Location: Winnipeg, Manitoba, Canada
Posts: 739
|
thanks guys i got them and the most of my dash!!!
I took two bolts out of both sides of my dash and it still doesn't come out, it it welded in? JHickson6 ![]()
__________________
My Rides 1967 C10 In Pieces for now ![]() 1985 Ford B700 SourPuss Bus - BIG BLUE 2003 Silverado CITY WORKER YELLOW!! |
![]() |
![]() |
![]() |
#5 |
Registered User
Join Date: Jan 2002
Location: East,,Tennessee
Posts: 211
|
GAUGES
AFTER YOU GET THE NOBS YOU WILLNEED TO TAKE THE OIL PRESSURE LINE OFF AND THE SPEED OMETER LINE THEN THE HOLE THING SOULD COME OFF
|
![]() |
![]() |
![]() |
#6 |
Account Suspended
Join Date: May 2002
Location: Olathe, Kansas
Posts: 929
|
OH! your taking the whole dash out?? I believe these are pinch welded to the cab and make up part of the windshield sealing surface.
|
![]() |
![]() |
![]() |
#7 |
OzarkHillbilly in Atlanta
Join Date: May 2002
Location: Douglasville, Ga. Salem, Mo.
Posts: 386
|
Yeap .... if you're talkin whole dash , that's a new ballgame.
Good Luck !!!!
__________________
72 custom/10 LWB 68 Longhorn C20 Custom Camper (sold) |
![]() |
![]() |
![]() |
#8 |
I Love This Stuff!
Join Date: May 2002
Location: Winnipeg, Manitoba, Canada
Posts: 739
|
Thanks again guys, it's all done!!
JHickson6 ![]() ![]()
__________________
My Rides 1967 C10 In Pieces for now ![]() 1985 Ford B700 SourPuss Bus - BIG BLUE 2003 Silverado CITY WORKER YELLOW!! |
![]() |
![]() |
![]() |
Bookmarks |
|
|