van tilts,gauge cluster, big block towers more

[67/72junkie]

I have 2 van tilts $125 each 2 nice gauge clusters $50 each 69/71 big block towers will be blasted and painted $100 72 big block towers $125 I have a complete running 402/400 combo with all acessories ,pullies manifolds etc is missing carb only even fan shroud $1200 for every thing to make your truck big block. All in 72 cheyenne rust bucket .I can install carb and battery so you can here run if interested .Is all stock and original I do not want to split up.72 non tilt auto column and 4spd $50 72 bench seat needs cover only $75 69/72 core support surface rust only $100 raising money for road trip to pick up new 72 in california. lots more parts ask and i,ll give you a price if I have it.I will start posting pics tomorrow prices don,t include shipping also have rust free longbed from califronia truck super straight floor and tubs $600

[sflanagan]

pic of van tilts?

Thanks...

[BIGJAKE97]

you wouldn't have any 68-72 big block 4 speed clutch parts, like the zbar or the engine zbar bracket? thanks, jake

[67/72junkie]

sorry no 4spd stuff only auto,have good 400 turbo for $200

[67/72junkie]

Hey guys I am trying to figure out how to get my pics here.I have a new dig camera and I am having trouble getting the pics to the files I want.I have been able to send the to my email address.I have kodak easyshare can some give me a little help getting them here.

[67/72junkie]

I hope I have this

[67/72junkie]

sorry haven't gotten more pics yet,I will on sunday when I get to my other property where it's all stored

[67/72junkie]

1/2 longbed 4x4 drive shaft with yoke $100 big block high humps $50 4spd $40 pics of standard column have several all tight also 4spd columns Have lots more pics just need to resize for download

[67/72junkie]

pics of complete bb with all acessories, mounts,linkages, shroud.I have original dist missing carb only.I drove to New York and pulled a 4x4 home with no troubles Is in 72 cheyenne 30 has been parked since govoner went bad in trans $1200 for everything to make your truck bb

[stevehill67]

I need big block towers how much shipped to 63556?

[55454]

If the 72 BB towers are $125 shipped I will take them.

[67/72junkie]

I will take $120 shipped for 67/71 big block towers and $145 for 72 only bb towers shipped .They will be sand blasted and freshly painted.I will ship anything listed in thread for price listed and plus actual shipping cost.It cost $19.80 to ship tach to Tallcountry in Mo yesterday.I just held tach in 1 hand and 2 bb towers
in the other and they weigh about the same that is why I went ahead and said $20 shipping on towers without packaging and getting quote.I have 1 set 67/71 and 2 sets 72 only. First I'll take it gets them

[BigBlockBurris]

Where in NC are you?

I am in Concord and am interested in the core support and high hump tunnel cover.

Would you seperate the big block radiator shroud?

Thanks!

BBB

[stevehill67]

i'd take the 67-71 BB towers @ 120 shipped but i'm new here and not sure how it works

[67/72junkie]

BigBlockBurris I am in elizabethtown about 21/2 hrs ride from you.I will be in your area some time in the next couple weeks and can deliver the support and high hump to you.I will set one of each aside for you as I have several of each.I will pm you a couple days before I head that way and set up a time that will be ok with you.I don't want to separate any parts off the 72 bb yet if I don't sell all together I may separate parts later and you will have first dibbs on the bb shroud. stevehill67 send a postal money order to Donald Wright 705 riverside dr elizabethtown NC 28337 I will blast and paint the towers tomorrow and package for shipping.They will go out the same day I recieve the money order. I will have paypal set up soon to make things easier for those who have paypal.I sent Tallcountrys tach out priority mail monday before I even recieved his money order so he could comment on quality of goods recieved,packaging and timelyness .Thanks

[stevehill67]

thanks 67/72 junkie i'll mo out tomorrow

[trucks72]

If give $450 for your 2 tilts, trans. hump cover, and the 72 motor mounts if yoou still have that stuff.

[67/72junkie]

stevehill67 I have your towers blasted and painted,they will go out as soon as I recieve the money order. Big Block Burris I am going to Charlotte sunday afternoon and can deliver your high hump and radiator support to you.send me a pm and let me know if that is ok with you and we will work out the details.trucks72 Am I correct that your offer is for the 2 van tilts ,a high hump and a set of 72 only bb towers shipped to crossville Tn? If so that can all go in 1 box and I can do that. thanks

[trucks72]

yes that is correct. Do you go to the Charlotte show in the spring? If so I will pay for the parts and let you bring them there if that would work.

[stevehill67]

money order in the mail ,do you by chance have another set ? got a buddy that will need a pair for 72 swb

[STOCKISH]

Interested in the bed pending pictures. Does it include the tailgate. How straight is everything. Have cash in hand. Thanks

[67/72junkie]

trucks72 yes I will be at the autofair.I am going to pick up and order of parts from Tim Christian so if you would like me to deliver the parts to you there that will be fine with me. Maybe we can have everyone who is a board member and there on saturday meet at Tims booth and get a group picture for the board and a little friendly conversation among fellow 67/72 fans. stevehill67 I have 1 set of 72 only towers left.Let me know if you want them before someone else jumps in and I will set them aside. 1972 SuperCheyenne the bed has no gate or trim.It is from a 72 bb custom deluxe that originally had upper trim and the tail light trim.It had a topper on it until about a year ago and has only minor surface rust on the bed floor but no pitting .the head board and tubs are dent free.The outside has a few small dings but no dents.If the few dings are pulled with a studd welder and puller it would be perfect and will paint with primer only and need absolutely no filler.I will take some good pics and post for you after work tomorrow.If i hadn't recently purchased a perfect shortfleet bed I had planned to remove the sides, cut down the floor and install 2 new good mark sides.You will not find a better bed for $600 on the east coast.

[STOCKISH]

Definately interested. I need a nice straight one to cut into a short bed.

[67/72junkie]

Are you going to install new short sides or cut the sides do also?I have a very nice floor with tubs and header panel that I have already cut down .Just need to weld up the 2 seams and install new sides.They are cut so the seams are on the lip of the cross supports so the weld will have to be ground on the top only and you cannot tell it has been shortened if the welds are ground and finished properly.

[m6z]

Is the high hump still available? If so I will take it.