FOR SALE: Used Edelbrock Performer intake manifold for SBC - The 1947 - Present Chevrolet & GMC Truck Message Board Network

kickinasphalt · 06-26-2004, 10:27 PM

Just replaced with an Edelbrock EPS intake and carb. This intake is a bit dirty but nothing is wrong with it. I would like to get $75 (includes shipping).

kickinasphalt · 06-26-2004, 10:40 PM

benscool1 · 06-27-2004, 02:47 AM

Don't know where to start here, I have no idea what a used manifold is worth so...$25???

383drvr · 06-27-2004, 03:09 AM

$30?

*1972C10* · 06-27-2004, 03:54 AM

11) All For Sale posts shall have a price or prices, as well as your
location. No bids or auctions allowed here!!! If you don't know the
price of what you’re selling, then you should do some research. If a Moderator
or Administrator here asks you to post price(s) and you have not within a 12
hour time frame, he will delete your thread, period.

Just FYI

here is the full article

http://67-72chevytrucks.com/vboard/a...ement.php3?f=8

Tx Firefighter · 06-27-2004, 07:28 AM

Well first off, I'm not going to say anything, because you've been a member here much longer than I have. I'm sure you know the rules just fine. Besides, look at the number of ebay auction posts people put on this board. Last time I looked, that was against the rules too.

But, put that thing on ebay. I've sold them on there for 75 dollars used. That's like what, a 125 dollar intake nowdays? I always offer to ship it free to any board member that wins my auction.

Clean it up real well with Castrol Super Clean.

*edited to correct typing errors- needed some coffee before typing*

curley1 · 06-27-2004, 09:56 AM

hey firefighter: I'll give you$25, if shipping to CA is included 93635

curley

c10crazy · 06-27-2004, 11:40 AM

curley1, start reading THIS thread from the beginning!

kickinasphalt · 06-27-2004, 12:12 PM

Ok I didn't know about the auction thing. Sorry about that. A few other boards I'm part of they do this all the time.

curley1 · 06-27-2004, 07:03 PM

ok, what do you want for the manifold shipped to CA? Let me know,

Curley

3rdGenrationChevyman · 06-27-2004, 07:14 PM

I think the ad said 75$, shipping included...

kickinasphalt · 06-28-2004, 12:59 AM

Yes I will sell it for $75 shipped.

curley1 · 06-28-2004, 09:42 AM

kickin: Good luck on your manifold. A new one is $114 from summit. you can find them all day long at the swap for $20-50.

Thanks Anyway,

Curley

Tx Firefighter · 06-28-2004, 06:14 PM

Kickin, just ebay that thing. I guarantee you that it will bring your 75 bucks.

I've never seen an Edelbrock intake at a swap under 50 bucks in my life.

3rdGenrationChevyman · 06-28-2004, 06:36 PM

yeah, what swap? I sure would like to know...

heh, curley, you live in los banos?

I used to do CB work & aluminum polishing at rotten robbies in santa nella...

curley1 · 06-28-2004, 09:44 PM

hey chevyman: Yes I live in Los Banos, I lived here about 4yr's now. My wife was raised in Los Banos, I'm originally from Monterey. Do you live around here? That swap meet I was talking about is in Turlock, at the Farigrounds. I went in May, saw tons of good parts CHEAP. They are having another on August 22, 2004, it's on a sunday only. Let me know if you want to meet up, drink some brews& check out the swap.

Curley

3rdGenrationChevyman · 06-28-2004, 10:03 PM

sounds cool, but I live in Albuquerque, NM, now... got tired of the smell of slaughterhouses & dairy farms...

curley1 · 06-28-2004, 10:12 PM

chevyman: I know what ya mean about the dairy farms, my father-in law is a farmer, and next door is a dairy. I however live in town. I just picked up my '67 BURB I only had it since this weekend. I've been trying to get it from this old lady for almost a year. I swooped it up for$500

I'll get out some pics of it when I get a chance. Also, I'll let ya know of some of the killer deals in Turlock.

I'll crack a brew for ya,

Curley

06-26-2004, 10:27 PM	#1
kickinasphalt Registered User Join Date: Jan 2000 Location: North Dakota Posts: 351	FOR SALE: Used Edelbrock Performer intake manifold for SBC Just replaced with an Edelbrock EPS intake and carb. This intake is a bit dirty but nothing is wrong with it. I would like to get $75 (includes shipping). __________________ 1972 K-10 Longbox,6" lift w/35's/350/SM465/NP205/3.73 1972 C-10 Longbox,350/350 1998 Pontiac Grand Prix GTP FOR SALE: 1971 K-10 Longbox,350/SM465/NP205 Last edited by kickinasphalt; 06-27-2004 at 12:12 PM.

06-26-2004, 10:40 PM	#2
kickinasphalt Registered User Join Date: Jan 2000 Location: North Dakota Posts: 351	__________________ 1972 K-10 Longbox,6" lift w/35's/350/SM465/NP205/3.73 1972 C-10 Longbox,350/350 1998 Pontiac Grand Prix GTP FOR SALE: 1971 K-10 Longbox,350/SM465/NP205

06-27-2004, 02:47 AM	#3
benscool1 Registered User Join Date: Mar 2003 Location: Williamsfield, IL Posts: 781	Don't know where to start here, I have no idea what a used manifold is worth so...$25??? __________________ Ben 84 C10 Silverado 14 Silverado Z71

06-27-2004, 07:28 AM	#6
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	Well first off, I'm not going to say anything, because you've been a member here much longer than I have. I'm sure you know the rules just fine. Besides, look at the number of ebay auction posts people put on this board. Last time I looked, that was against the rules too. But, put that thing on ebay. I've sold them on there for 75 dollars used. That's like what, a 125 dollar intake nowdays? I always offer to ship it free to any board member that wins my auction. Clean it up real well with Castrol Super Clean. edited to correct typing errors- needed some coffee before typing __________________ I'm on the Instagram- @Gearhead_Kevin Last edited by Tx Firefighter; 06-27-2004 at 07:31 AM.

06-27-2004, 09:56 AM	#7
curley1 Registered User Join Date: Jan 2004 Location: los banos, ca Posts: 84	manifold hey firefighter: I'll give you$25, if shipping to CA is included 93635 curley

06-27-2004, 03:09 AM	#4
383drvr Registered User Join Date: Oct 2003 Location: Dallas, Tx. Posts: 308	$30?

06-27-2004, 03:54 AM	#5
1972C10 Account Suspended Join Date: Dec 2003 Location: Texas Posts: 2,686	11) All For Sale posts shall have a price or prices, as well as your location. No bids or auctions allowed here!!! If you don't know the price of what you’re selling, then you should do some research. If a Moderator or Administrator here asks you to post price(s) and you have not within a 12 hour time frame, he will delete your thread, period. Just FYI here is the full article http://67-72chevytrucks.com/vboard/a...ement.php3?f=8

06-27-2004, 11:40 AM	#8
c10crazy Like a Rock! Join Date: May 2002 Location: USA Posts: 1,092	curley1, start reading THIS thread from the beginning! __________________ 69 LWB Runs great - work in progress Mess with me and you mess with the whole trailer park!

06-27-2004, 12:12 PM	#9
kickinasphalt Registered User Join Date: Jan 2000 Location: North Dakota Posts: 351	Ok I didn't know about the auction thing. Sorry about that. A few other boards I'm part of they do this all the time. __________________ 1972 K-10 Longbox,6" lift w/35's/350/SM465/NP205/3.73 1972 C-10 Longbox,350/350 1998 Pontiac Grand Prix GTP FOR SALE: 1971 K-10 Longbox,350/SM465/NP205

06-27-2004, 07:03 PM	#10
curley1 Registered User Join Date: Jan 2004 Location: los banos, ca Posts: 84	manifold ok, what do you want for the manifold shipped to CA? Let me know, Curley

06-27-2004, 07:14 PM	#11
3rdGenrationChevyman What me ugly? Join Date: Jun 2004 Location: Albuquerque, NM Posts: 104	I think the ad said 75$, shipping included... __________________ `70 C-10 LWB Big & Ugly, like its owner... 307 SB - 600 Holley, Offenhauser 360 - Muncie 465, 3:73 Posi, 33" BF-G`s I like my trucks like my women... big & old with 33" feet.

06-28-2004, 12:59 AM	#12
kickinasphalt Registered User Join Date: Jan 2000 Location: North Dakota Posts: 351	Yes I will sell it for $75 shipped. __________________ 1972 K-10 Longbox,6" lift w/35's/350/SM465/NP205/3.73 1972 C-10 Longbox,350/350 1998 Pontiac Grand Prix GTP FOR SALE: 1971 K-10 Longbox,350/SM465/NP205

06-28-2004, 09:42 AM	#13
curley1 Registered User Join Date: Jan 2004 Location: los banos, ca Posts: 84	manifold kickin: Good luck on your manifold. A new one is $114 from summit. you can find them all day long at the swap for $20-50. Thanks Anyway, Curley

06-28-2004, 06:14 PM	#14
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	Kickin, just ebay that thing. I guarantee you that it will bring your 75 bucks. I've never seen an Edelbrock intake at a swap under 50 bucks in my life. __________________ I'm on the Instagram- @Gearhead_Kevin

06-28-2004, 06:36 PM	#15
3rdGenrationChevyman What me ugly? Join Date: Jun 2004 Location: Albuquerque, NM Posts: 104	yeah, what swap? I sure would like to know... heh, curley, you live in los banos? I used to do CB work & aluminum polishing at rotten robbies in santa nella... __________________ `70 C-10 LWB Big & Ugly, like its owner... 307 SB - 600 Holley, Offenhauser 360 - Muncie 465, 3:73 Posi, 33" BF-G`s I like my trucks like my women... big & old with 33" feet. Last edited by 3rdGenrationChevyman; 06-28-2004 at 06:42 PM.



Register or Log In To remove these advertisements.

06-28-2004, 09:44 PM	#16
curley1 Registered User Join Date: Jan 2004 Location: los banos, ca Posts: 84	swap hey chevyman: Yes I live in Los Banos, I lived here about 4yr's now. My wife was raised in Los Banos, I'm originally from Monterey. Do you live around here? That swap meet I was talking about is in Turlock, at the Farigrounds. I went in May, saw tons of good parts CHEAP. They are having another on August 22, 2004, it's on a sunday only. Let me know if you want to meet up, drink some brews& check out the swap. Curley

06-28-2004, 10:03 PM	#17
3rdGenrationChevyman What me ugly? Join Date: Jun 2004 Location: Albuquerque, NM Posts: 104	sounds cool, but I live in Albuquerque, NM, now... got tired of the smell of slaughterhouses & dairy farms... __________________ `70 C-10 LWB Big & Ugly, like its owner... 307 SB - 600 Holley, Offenhauser 360 - Muncie 465, 3:73 Posi, 33" BF-G`s I like my trucks like my women... big & old with 33" feet.

06-28-2004, 10:12 PM	#18
curley1 Registered User Join Date: Jan 2004 Location: los banos, ca Posts: 84	swap chevyman: I know what ya mean about the dairy farms, my father-in law is a farmer, and next door is a dairy. I however live in town. I just picked up my '67 BURB I only had it since this weekend. I've been trying to get it from this old lady for almost a year. I swooped it up for$500 I'll get out some pics of it when I get a chance. Also, I'll let ya know of some of the killer deals in Turlock. I'll crack a brew for ya, Curley

Register or Log In To remove these advertisements.