IN AZ? need help! will pay!! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*primer67* · 05-04-2002, 04:04 AM

I am in phoenix, and have a bent axle. recieved new axle from randy. I started on the process to replace it and found that the gears were all messed up! - Today i located a rearend -- the guts are all I needed -- I removed the guts- by the way, this one has 32 teeth on the ring ? what ratio? - anyway I will exchange the rings on the carrier, and replace the unit -- One problem....
the pin in the carrier will not push out!! - the PO f@#ked it up big time! It is currently 2:02 am, and I have been trying to fix this since 7:00 last afternoon. I am thinking a torch will do this - If I can't get this done, I will sit and grind dremel wheels until I cry. - If anybody can help me, I will make it worth (really worth!!) their time. I can be reached at 602-299-7205
please Please please respond!!
thanks.

------------------
1967 C-10 Longbed
rollpanned front&back
Cowl induction hood
'91 5.7 liter/vortec heads, 700r4 trans. holley headers,
holley fuelpump,
holley mufflers. converted to edelbrock performer/carter 625
hei/advanced recurve
MSD 6A ignition box.
Accel supercoil
Accel custom 8.8 wires
5 bucks a plug even!
faster!!!!!!!!!!!!!
soon to be lowered "a little" looking for a good tonneau cover.

68 Suburban · 05-04-2002, 04:20 AM

What type of help do you need?

*primer67* · 05-04-2002, 04:25 AM

I think I'll need to cut that pin out with a torch. pretty much that's all I need help with (famous last words)

68 Suburban · 05-04-2002, 04:31 AM

Well do you have a torch? What help do you need?

**Desert Rat** · 05-04-2002, 08:06 AM

did you take out the bolt?

*primer67* · 05-04-2002, 03:48 PM

I dont have a torch - I took out the bolt the pin is so warped that it has mushroomed around the spider gears -- they have their own tracks on the pin to ride on basically.
ttt

*Fast68Chevy* · 05-04-2002, 04:07 PM

32 ?
should be 41 or 43 if is 64-72 axle..
lok on the very edge of the ring gear while tiurning it you will see stamped in numbers, wil say sometihng like 43:13 on it, divide smaller into larger ot get you ratio. i have torch, too bad im not out there, i really wish i was!!! sniff sniff**

am gonna call you in a few,
R

[This message has been edited by Fast68Chevy (edited May 04, 2002).]

05-04-2002, 04:04 AM	#1
primer67 Account Suspended Join Date: Oct 2001 Location: phoenix, AZ. Posts: 181	IN AZ? need help! will pay!! I am in phoenix, and have a bent axle. recieved new axle from randy. I started on the process to replace it and found that the gears were all messed up! - Today i located a rearend -- the guts are all I needed -- I removed the guts- by the way, this one has 32 teeth on the ring ? what ratio? - anyway I will exchange the rings on the carrier, and replace the unit -- One problem.... the pin in the carrier will not push out!! - the PO f@#ked it up big time! It is currently 2:02 am, and I have been trying to fix this since 7:00 last afternoon. I am thinking a torch will do this - If I can't get this done, I will sit and grind dremel wheels until I cry. - If anybody can help me, I will make it worth (really worth!!) their time. I can be reached at 602-299-7205 please Please please respond!! thanks. ------------------ 1967 C-10 Longbed rollpanned front&back Cowl induction hood '91 5.7 liter/vortec heads, 700r4 trans. holley headers, holley fuelpump, holley mufflers. converted to edelbrock performer/carter 625 hei/advanced recurve MSD 6A ignition box. Accel supercoil Accel custom 8.8 wires 5 bucks a plug even! faster!!!!!!!!!!!!! soon to be lowered "a little" looking for a good tonneau cover.

05-04-2002, 04:20 AM	#2
68 Suburban Registered User Join Date: Oct 2000 Location: From Chicago, Live in Phoenix, AZ Posts: 6,802	What type of help do you need? __________________ Just sitting here contemplating contemplation.

05-04-2002, 04:31 AM	#4
68 Suburban Registered User Join Date: Oct 2000 Location: From Chicago, Live in Phoenix, AZ Posts: 6,802	Well do you have a torch? What help do you need? __________________ Just sitting here contemplating contemplation.

05-04-2002, 04:25 AM	#3
primer67 Account Suspended Join Date: Oct 2001 Location: phoenix, AZ. Posts: 181	I think I'll need to cut that pin out with a torch. pretty much that's all I need help with (famous last words)

05-04-2002, 08:06 AM	#5
Desert Rat Senior Member Join Date: Dec 1999 Location: Darrington, Washington Posts: 3,963	did you take out the bolt?

05-04-2002, 03:48 PM	#6
primer67 Account Suspended Join Date: Oct 2001 Location: phoenix, AZ. Posts: 181	I dont have a torch - I took out the bolt the pin is so warped that it has mushroomed around the spider gears -- they have their own tracks on the pin to ride on basically. ttt

05-04-2002, 04:07 PM	#7
Fast68Chevy Account Suspended Join Date: May 2000 Location: IL Posts: 0	32 ? should be 41 or 43 if is 64-72 axle.. lok on the very edge of the ring gear while tiurning it you will see stamped in numbers, wil say sometihng like 43:13 on it, divide smaller into larger ot get you ratio. i have torch, too bad im not out there, i really wish i was!!! sniff sniff** am gonna call you in a few, R [This message has been edited by Fast68Chevy (edited May 04, 2002).]



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.