67 Truck Buckets ? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Americanrider · 03-24-2007, 01:06 AM

Asking the experts in here, do you think these are original 67 Truck Buckets?
Thanks in advance, ~B

GREASEMONKEY72 · 03-24-2007, 01:09 AM

wheres these????

Americanrider · 03-24-2007, 01:15 AM

The only ones I can compare them to are from a pic out of the 67 Panel truck that sold here on the board.

**John Fabris** · 03-24-2007, 01:18 AM

I would say no (for a factory 67 Truck)... They don't seem to have the right thickness in the back, and the shape of the bottom foam is not the same. Also, there would also been a full seat frame.

Americanrider · 03-24-2007, 01:33 AM

Its a 67 C-30 Motor Home Cab.

bad_turbo · 03-24-2007, 01:54 AM

the different motorhomes I have looked at had seats like that in them but they were a '69 and a '72.

**special-K** · 03-24-2007, 07:47 AM

Those aren`t "factory" seats,but part of the RV conversion.I think they`re an awesome retro-fit,though.They are meant for these trucks.I`d want them in a truck,for sure.They`re "kinda" original,like saddle tanks,Barton`s bumpers,etc...
I know it`s later and not and Open Road.But GM had a deal with Open Road and they were more or less "Factory".

Spray-Bomb · 03-24-2007, 09:34 AM

Those are junk

They'll poke a spring right though your butt

So give them to me

Huskerboy2 · 03-24-2007, 09:53 AM

I have them in my motorhome. I love them. They would be very cool in a truck because they are on brackets that flip the whole seat forward. Very cool modification to a truck.

stllookn · 03-24-2007, 01:47 PM

Ben, I want that C30 motorhome to make a flatbed...LOL! I just got another piece of iron however...what's a guy to do?

Bob Moore · 03-24-2007, 04:16 PM

Those seats sure look comfortable Ben.

Is there a console or does the passenger seat tip like a Blazer? I would think maybe no console for acess to the motorhome cabin. There is a 71/72 chassis mounted camper up the road. I will take a look the seats in that. I have a console - either seatbelt or cupholder if your's is missing.

I need to get out looking for truck parts and whole trucks more than I do now - Bob

stllookn · 03-24-2007, 04:23 PM

Stay out of my neighborhood Bob...it's tough enough dealing with PICKMUP and Livrat...LOL! The nice thing is...there are still plenty to go around! I still have to really finish one!

cabinetguy · 03-24-2007, 07:53 PM

Mike,You think Frank and Livrat are the only ones in the area.

LUV2XCLR8 · 03-24-2007, 08:31 PM

Quote:

Originally Posted by Huskerboy2

They would be very cool in a truck because they are on brackets that flip the
whole seat forward. Very cool modification to a truck.

**special-K** · 03-24-2007, 09:57 PM

I wanted Livrat`s Motorhome he was selling a couple or so years back.Those seats look like they`d be better for longleggers.

bad_turbo · 03-24-2007, 10:29 PM

looking at a '67 motorhome for sale in the morning. If I don't take it I will post it the appropriate section

Americanrider · 03-25-2007, 12:22 AM

Bob, I have a cup holder console out in the shed but it needs work.... kind like everything else I own.

leadfoot067 · 03-25-2007, 10:13 AM

ben i have a set of the original buddy buckets out of the white truck if ya wanna compare...gimme a call today...

killer71 · 03-25-2007, 10:26 AM

Quote:

Originally Posted by Americanrider

Bob, I have a cup holder console out in the shed but it needs work.... kind like everything else I own.

I wanna see!

Bob Moore · 03-26-2007, 02:20 AM

Wow - what a group!! Wes, Frank(Pickmup), Americarider, CabinetGuy, Liverat, Stllookin, CG, Leadfoot067, TruckBill, Litemup, my buddy Sticky, and yours truly. All within a 25 mile circle. Not many trucks get past us.

I am about ready to give it up as far as new projects go. I say that but still look for parts and pieces.

The recent post showing Zeekel's 67 Seafaom Green raised 4X4 Shorty has got me going again. It may be time to redo my original 67 3/4T Longbed. I did it back in 93. Might be time to freshen up the old girl. I never quite finished to body work. I haven't driven it over 500 miles in the last 4 years but will be starting again soon.

Kent and the valley are too far for an old man like myself to find my way home. I like going the other way - Bob

Chris H · 03-26-2007, 09:07 AM

Quote:

Originally Posted by Americanrider

Asking the experts in here, do you think these are original 67 Truck Buckets?
Thanks in advance, ~B

I would have to answer that these buckets are original motorhome buckets, as added by the motorhome conversion company. They were not installed by GM. My 68 C30 Open Road had the same ones (very comfy I might add):

03-24-2007, 01:06 AM	#1
Americanrider Registered User Join Date: Dec 2004 Location: NW, WA. Posts: 1,421	67 Truck Buckets ? Asking the experts in here, do you think these are original 67 Truck Buckets? Thanks in advance, ~B Attached Images Last edited by Americanrider; 03-24-2007 at 01:10 AM.

03-24-2007, 01:09 AM	#2
GREASEMONKEY72 Registered User Join Date: Aug 2006 Location: Bakersfield,CA Posts: 7,893	Re: 67 Truck Buckets ? wheres these???? __________________ -steven Alte Seele S.S. "Allison" '72 C/10 LWB 350SB/TH350 - DD PITBULL IS NOT A CRIME

03-24-2007, 01:15 AM	#3
Americanrider Registered User Join Date: Dec 2004 Location: NW, WA. Posts: 1,421	Re: 67 Truck Buckets ? The only ones I can compare them to are from a pic out of the 67 Panel truck that sold here on the board. Attached Images

03-24-2007, 01:18 AM	#4
John Fabris TOTY 2006 Join Date: Dec 1999 Location: Magalia CA USA Posts: 2,270	Re: 67 Truck Buckets ? I would say no (for a factory 67 Truck)... They don't seem to have the right thickness in the back, and the shape of the bottom foam is not the same. Also, there would also been a full seat frame. __________________ John Fabris 67 C10 SWB Last edited by John Fabris; 03-26-2007 at 10:04 AM.

03-24-2007, 01:33 AM	#5
Americanrider Registered User Join Date: Dec 2004 Location: NW, WA. Posts: 1,421	Re: 67 Truck Buckets ? Its a 67 C-30 Motor Home Cab.

03-24-2007, 01:54 AM	#6
bad_turbo turbo enthusiast Join Date: Jan 2004 Location: carmichael, ca. Posts: 1,826	Re: 67 Truck Buckets ? the different motorhomes I have looked at had seats like that in them but they were a '69 and a '72. __________________ "But daddy, I didn't hit them all with a stick"...what my 6 year old tells me when I pick him up from school early for fighting "

03-24-2007, 07:47 AM	#7
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,852	Re: 67 Truck Buckets ? Those aren`t "factory" seats,but part of the RV conversion.I think they`re an awesome retro-fit,though.They are meant for these trucks.I`d want them in a truck,for sure.They`re "kinda" original,like saddle tanks,Barton`s bumpers,etc... I know it`s later and not and Open Road.But GM had a deal with Open Road and they were more or less "Factory". __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~ Last edited by special-K; 03-24-2007 at 07:54 AM.

03-24-2007, 09:34 AM	#8
Spray-Bomb Texas Big Wig Join Date: Jan 2007 Location: Mineola, Texas Posts: 5,620	Re: 67 Truck Buckets ? Those are junk They'll poke a spring right though your butt So give them to me __________________ Just not low enough... ----------------------------- Sinister Killer

03-24-2007, 09:53 AM	#9
Huskerboy2 Senior Member Join Date: Feb 2001 Location: Austin, Texas, USA Posts: 1,628	Re: 67 Truck Buckets ? I have them in my motorhome. I love them. They would be very cool in a truck because they are on brackets that flip the whole seat forward. Very cool modification to a truck. __________________ '72 Chevy Blazer

03-24-2007, 01:47 PM	#10
stllookn Saving 1 truck at a time! Join Date: Aug 2001 Location: Kent, WA Posts: 6,465	Re: 67 Truck Buckets ? Ben, I want that C30 motorhome to make a flatbed...LOL! I just got another piece of iron however...what's a guy to do? __________________ '68 C20 Longhorn 50th Anniversary 400/TH400 '68 C20 Longhorn 50th Anniversary 468/TH400w/buckets '72 C20 Halfhorn (Longhorn w/o cab and front clip) '69 Flxible Cruiser (look up ugly in the dictionary)

03-24-2007, 04:16 PM	#11
Bob Moore Registered User Join Date: Feb 2004 Location: Tacoma WA Posts: 1,365	Re: 67 Truck Buckets ? Those seats sure look comfortable Ben. Is there a console or does the passenger seat tip like a Blazer? I would think maybe no console for acess to the motorhome cabin. There is a 71/72 chassis mounted camper up the road. I will take a look the seats in that. I have a console - either seatbelt or cupholder if your's is missing. I need to get out looking for truck parts and whole trucks more than I do now - Bob __________________ 67 C-20 LWB, tilt, speed alert, vac, 454, T400 67 C-10 SWB, factory air with more to follow

03-24-2007, 04:23 PM	#12
stllookn Saving 1 truck at a time! Join Date: Aug 2001 Location: Kent, WA Posts: 6,465	Re: 67 Truck Buckets ? Stay out of my neighborhood Bob...it's tough enough dealing with PICKMUP and Livrat...LOL! The nice thing is...there are still plenty to go around! I still have to really finish one! __________________ '68 C20 Longhorn 50th Anniversary 400/TH400 '68 C20 Longhorn 50th Anniversary 468/TH400w/buckets '72 C20 Halfhorn (Longhorn w/o cab and front clip) '69 Flxible Cruiser (look up ugly in the dictionary)

03-24-2007, 07:53 PM	#13
cabinetguy 67 shorty Join Date: Feb 2007 Location: Graham,Wa. Posts: 190	Re: 67 Truck Buckets ? Mike,You think Frank and Livrat are the only ones in the area. __________________ 67 SWB with enough parts to build two

03-24-2007, 09:57 PM	#15
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,852	Re: 67 Truck Buckets ? I wanted Livrat`s Motorhome he was selling a couple or so years back.Those seats look like they`d be better for longleggers. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

03-24-2007, 10:29 PM	#16
bad_turbo turbo enthusiast Join Date: Jan 2004 Location: carmichael, ca. Posts: 1,826	Re: 67 Truck Buckets ? looking at a '67 motorhome for sale in the morning. If I don't take it I will post it the appropriate section __________________ "But daddy, I didn't hit them all with a stick"...what my 6 year old tells me when I pick him up from school early for fighting "



Register or Log In To remove these advertisements.

03-25-2007, 12:22 AM	#17
Americanrider Registered User Join Date: Dec 2004 Location: NW, WA. Posts: 1,421	Re: 67 Truck Buckets ? Bob, I have a cup holder console out in the shed but it needs work.... kind like everything else I own.

03-25-2007, 10:13 AM	#18
leadfoot067 horsepower junkie Join Date: Aug 2003 Location: graham, washington Posts: 326	Re: 67 Truck Buckets ? ben i have a set of the original buddy buckets out of the white truck if ya wanna compare...gimme a call today... __________________ 67 short wide box,350/700r4/3.73posi 71 olds cutlass "S" mom bought new..12.30s@113MPH

03-26-2007, 02:20 AM	#20
Bob Moore Registered User Join Date: Feb 2004 Location: Tacoma WA Posts: 1,365	Re: 67 Truck Buckets ? Wow - what a group!! Wes, Frank(Pickmup), Americarider, CabinetGuy, Liverat, Stllookin, CG, Leadfoot067, TruckBill, Litemup, my buddy Sticky, and yours truly. All within a 25 mile circle. Not many trucks get past us. I am about ready to give it up as far as new projects go. I say that but still look for parts and pieces. The recent post showing Zeekel's 67 Seafaom Green raised 4X4 Shorty has got me going again. It may be time to redo my original 67 3/4T Longbed. I did it back in 93. Might be time to freshen up the old girl. I never quite finished to body work. I haven't driven it over 500 miles in the last 4 years but will be starting again soon. Kent and the valley are too far for an old man like myself to find my way home. I like going the other way - Bob __________________ 67 C-20 LWB, tilt, speed alert, vac, 454, T400 67 C-10 SWB, factory air with more to follow Last edited by Bob Moore; 03-26-2007 at 02:22 AM.

Register or Log In To remove these advertisements.