![]() |
|
![]() |
#1 |
Registered User
Join Date: Oct 2011
Location: los angeles,ca
Posts: 9
|
'71 k20
Hey all, I recently bought a 71 k20 and I was wondering if anyone has ever seen an aftermarket indicator light for the 4x4 shifter (to let me know which gear I'm in)?
|
![]() |
![]() |
![]() |
#2 |
Special Order
![]() ![]() Join Date: Nov 2004
Location: Mt Airy, MD
Posts: 85,859
|
Re: '71 k20
No,I never have. It seem simple enough to know. But,if you feel you need an indicator you could most likely rig up a later model one to work. 4-Lo is obvious because you are 2x reduced and on the opposite side of neutral from 2-Hi,2-Hi is behind neutral (and only the rear wheels spin),and 4-Hi is just all the way back. Do you have the original knob with the pattern on it?
__________________
"BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~ |
![]() |
![]() |
![]() |
#3 |
Registered User
Join Date: Aug 2010
Location: Edwards, CA
Posts: 7,503
|
Re: '71 k20
Some maufacturers offered "4X4 engaged" lights as options. My IHC pickup has one. There was also an aftermarket kit or two back in the day as I remember. But these only indicate the front driveline is engaged not the atual gear position selected.
If "gear selected" is your desire, then you might take a look at the thread on T221 shifter boots. http://67-72chevytrucks.com/vboard/s....php?p=5008247
__________________
Thanks, Tim * VIN/Model Decoders * Power Team Charts (engine/transmission/gear ratio) * Post Your Pickup SPID ** Blazer SPID ** Suburban/Panel SPID * RTFM ... Read The Factory Manuals... download 'em here Highlanders ** Do you have a 1972 Plaid Pickup? ** Plaid Blazer ** Plaid Suburban |
![]() |
![]() |
![]() |
#4 |
Registered User
Join Date: Mar 2011
Location: Almonte, Ontario, Canada
Posts: 155
|
Re: '71 k20
Check this out..... is it what you after?
http://67-72chevytrucks.com/vboard/s...d.php?t=449501 |
![]() |
![]() |
![]() |
#5 |
What?
Join Date: Jun 2007
Location: Southern California
Posts: 7,617
|
Re: '71 k20
I am with Special-K on this.
These old trucks run like night and day when in 4 wheel drive, and behave nothing like modern day 4x4 trucks when the transfer case is engaged. Even hopping into the cab of a classic 4x4 one tends to notice the transfer case shifter in the engaged position, though I am assuming you are familiar with older 4x4 trucks. I mean no disrespect to your question, but I am curious as to why you are interested in setting this up?
__________________
Chris 1968 K20 Suburban 1972 K10 LWB PU |
![]() |
![]() |
![]() |
#6 |
Registered User
Join Date: Mar 2011
Location: Almonte, Ontario, Canada
Posts: 155
|
Re: '71 k20
Good call, that light is neat that I posted, but you're both right......If you can't tell what your tcase is in.....then something isn't working. A nifty little option....but unrequired.
......maybe an indicator to remind you to lock your hubs.......have any of us been there? I'll bet only once........ |
![]() |
![]() |
![]() |
Bookmarks |
|
|