NC WTB Stock Steel 15x6, 6 lug wheels 4"BS - The 1947 - Present Chevrolet & GMC Truck Message Board Network

47thriftmaster · 10-02-2011, 05:39 PM

Looking to pick up 2 Stock Steels for my 72. Had five, but after blasting only 3 survived the cut. I need the face to by relatively good, no pitting, the backs are not as important. The wheels need to have 4" back spacing to match my other three, 3 1/2 will not work. Thank you for any and all help.

Here is a pic of one prior to blasting.

**Tim Christian** · 10-02-2011, 05:48 PM

I might have two with this truck I just bought. I will have to measure the back spacing.

47thriftmaster · 10-02-2011, 08:14 PM

Sounds good Tim, thanks

longbed67 · 10-02-2011, 08:30 PM

I have 5 of them but have to wait till I get my 5x5 setup to switch rims...

47thriftmaster · 10-09-2011, 10:59 AM

How long would that be by chance? Tim any luck on the wheels? Still looking, thanks.

Quote:

Originally Posted by longbed67

I have 5 of them but have to wait till I get my 5x5 setup to switch rims...

**68 Four on the Floor** · 10-09-2011, 11:05 AM

Ill check the backspacing on the ones i just pulled off my 69 frame. let ya know in an hour.

47thriftmaster · 10-09-2011, 11:29 AM

Sounds good

**68 Four on the Floor** · 10-09-2011, 02:47 PM

Well the ones i pulled off the rear are 3.5. Maybe fronts have more offset? Ill be pulling those later tonight. Ill let you know what they are.

**68 Four on the Floor** · 10-09-2011, 08:57 PM

Looks like all three of mine are 3.5s. Sorry best of luck finding some!

47thriftmaster · 10-10-2011, 06:41 PM

Thanks for checking. Yah, I hope it turns out.

Quote:

Originally Posted by 68 Four on the Floor

Looks like all three of mine are 3.5s. Sorry best of luck finding some!

bsw6767 · 10-09-2011, 08:59 PM

I have 3 that are 5" backspacing, sorry!

47thriftmaster · 10-10-2011, 06:42 PM

Not a problem, thanks for looking.

Quote:

Originally Posted by bsw6767

I have 3 that are 5" backspacing, sorry!

**Tim Christian** · 10-13-2011, 07:48 PM

Sorry I am so slow they ended up being so rusty I did not even measure. Sorry Tim

47thriftmaster · 10-14-2011, 07:14 PM

Thanks for getting back to me Tim, yah sometimes the wheels just don't turn out. I ended up with three out of five. Thanks again

Quote:

Originally Posted by Tim Christian

Sorry I am so slow they ended up being so rusty I did not even measure. Sorry Tim

*mrdana60* · 10-13-2011, 09:51 PM

i have 4 off a 69 with drum brakes. i ll try and check the backspacing tomorrow

47thriftmaster · 10-18-2011, 10:23 PM

Still looking for a pair of wheels, 15x6 6 lug with no pitting on the face. Thanks

47thriftmaster · 10-24-2011, 08:16 PM

Ttt

47thriftmaster · 10-27-2011, 10:06 AM

ttt, need some wheels

**michael bustamante** · 10-27-2011, 10:10 AM

I have 5 of them all solid no rust. Let me know if youre interested. 6 lug rims

47thriftmaster · 10-27-2011, 11:00 AM

Can you post pics of your best 2, front, back and inside? Also the valve stem area, had one bad in that area. I am interested, would also need total for 2 shipped to 28327. Thank you for the help.

47thriftmaster · 10-29-2011, 10:05 AM

Still looking, need 2 with 4" back spacing. Thanks

47thriftmaster · 10-30-2011, 11:51 AM

Sunday Bump

CrewCab59 · 10-31-2011, 09:35 AM

I have some .

http://67-72chevytrucks.com/vboard/s...d.php?t=476651

69Beauty · 10-31-2011, 12:39 PM

Just got a pair of them i will have to look at backspacing when i get home. now tht i think about it they might be 5.5 and not 6's will that effect your decision?

47thriftmaster · 11-01-2011, 10:13 PM

I saw your thread but was not looking for 15x8 wheels, so never asked. Let me know if you have 15x6 6 lug wheels with 4" back spacing. Would be going to 28327. Thank you.

Quote:

Originally Posted by CrewCab59

I have some .

http://67-72chevytrucks.com/vboard/s...d.php?t=476651

10-02-2011, 05:39 PM	#1
47thriftmaster Registered User Join Date: Sep 2010 Location: UP, Washington Posts: 978	WTB Stock Steel 15x6, 6 lug wheels 4"BS Looking to pick up 2 Stock Steels for my 72. Had five, but after blasting only 3 survived the cut. I need the face to by relatively good, no pitting, the backs are not as important. The wheels need to have 4" back spacing to match my other three, 3 1/2 will not work. Thank you for any and all help. Here is a pic of one prior to blasting.

10-02-2011, 05:48 PM	#2
Tim Christian Senior Member Join Date: Dec 1999 Location: TN/VA Posts: 6,388	Re: WTB Stock Steel 15x6, 6 lug wheels 4"BS I might have two with this truck I just bought. I will have to measure the back spacing.

10-02-2011, 08:14 PM	#3
47thriftmaster Registered User Join Date: Sep 2010 Location: UP, Washington Posts: 978	Re: WTB Stock Steel 15x6, 6 lug wheels 4"BS Sounds good Tim, thanks

10-02-2011, 08:30 PM	#4
longbed67 Registered User Join Date: Jun 2011 Location: Monroe, WI Posts: 1,415	Re: WTB Stock Steel 15x6, 6 lug wheels 4"BS I have 5 of them but have to wait till I get my 5x5 setup to switch rims...

10-09-2011, 11:05 AM	#6
68 Four on the Floor Senior Member Join Date: Jun 2011 Location: Washburn, IA Posts: 600	Re: WTB Stock Steel 15x6, 6 lug wheels 4"BS Ill check the backspacing on the ones i just pulled off my 69 frame. let ya know in an hour.

10-09-2011, 11:29 AM	#7
47thriftmaster Registered User Join Date: Sep 2010 Location: UP, Washington Posts: 978	Re: WTB Stock Steel 15x6, 6 lug wheels 4"BS Sounds good

10-09-2011, 02:47 PM	#8
68 Four on the Floor Senior Member Join Date: Jun 2011 Location: Washburn, IA Posts: 600	Re: WTB Stock Steel 15x6, 6 lug wheels 4"BS Well the ones i pulled off the rear are 3.5. Maybe fronts have more offset? Ill be pulling those later tonight. Ill let you know what they are.

10-09-2011, 08:57 PM	#9
68 Four on the Floor Senior Member Join Date: Jun 2011 Location: Washburn, IA Posts: 600	Re: WTB Stock Steel 15x6, 6 lug wheels 4"BS Looks like all three of mine are 3.5s. Sorry best of luck finding some!

10-09-2011, 08:59 PM	#11
bsw6767 Registered User Join Date: Sep 2008 Location: Williamstown, Kentucky Posts: 132	Re: WTB Stock Steel 15x6, 6 lug wheels 4"BS I have 3 that are 5" backspacing, sorry!

10-13-2011, 07:48 PM	#13
Tim Christian Senior Member Join Date: Dec 1999 Location: TN/VA Posts: 6,388	Re: WTB Stock Steel 15x6, 6 lug wheels 4"BS Sorry I am so slow they ended up being so rusty I did not even measure. Sorry Tim

10-13-2011, 09:51 PM	#15
mrdana60 Account Suspended Join Date: Sep 2010 Location: centre al Posts: 2,472	Re: WTB Stock Steel 15x6, 6 lug wheels 4"BS i have 4 off a 69 with drum brakes. i ll try and check the backspacing tomorrow

10-18-2011, 10:23 PM	#16
47thriftmaster Registered User Join Date: Sep 2010 Location: UP, Washington Posts: 978	Re: WTB Stock Steel 15x6, 6 lug wheels 4"BS Still looking for a pair of wheels, 15x6 6 lug with no pitting on the face. Thanks

10-24-2011, 08:16 PM	#17
47thriftmaster Registered User Join Date: Sep 2010 Location: UP, Washington Posts: 978	Re: WTB Stock Steel 15x6, 6 lug wheels 4"BS Ttt

10-27-2011, 10:06 AM	#18
47thriftmaster Registered User Join Date: Sep 2010 Location: UP, Washington Posts: 978	Re: WTB Stock Steel 15x6, 6 lug wheels 4"BS ttt, need some wheels

10-27-2011, 10:10 AM	#19
michael bustamante Senior Member Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,858	Re: WTB Stock Steel 15x6, 6 lug wheels 4"BS I have 5 of them all solid no rust. Let me know if youre interested. 6 lug rims __________________ 1967custom



Register or Log In To remove these advertisements.

10-27-2011, 11:00 AM	#20
47thriftmaster Registered User Join Date: Sep 2010 Location: UP, Washington Posts: 978	Re: WTB Stock Steel 15x6, 6 lug wheels 4"BS Can you post pics of your best 2, front, back and inside? Also the valve stem area, had one bad in that area. I am interested, would also need total for 2 shipped to 28327. Thank you for the help.

10-29-2011, 10:05 AM	#21
47thriftmaster Registered User Join Date: Sep 2010 Location: UP, Washington Posts: 978	Re: WTB Stock Steel 15x6, 6 lug wheels 4"BS Still looking, need 2 with 4" back spacing. Thanks

10-30-2011, 11:51 AM	#22
47thriftmaster Registered User Join Date: Sep 2010 Location: UP, Washington Posts: 978	Re: WTB Stock Steel 15x6, 6 lug wheels 4"BS Sunday Bump

10-31-2011, 09:35 AM	#23
CrewCab59 Registered User Join Date: Jul 2010 Location: Knoxville,TN Posts: 1,185	Re: WTB Stock Steel 15x6, 6 lug wheels 4"BS I have some . http://67-72chevytrucks.com/vboard/s...d.php?t=476651 __________________ 1972 Custom Deluxe 20 4x4 burb 1971 GMC SWB CST 4x4 1972 GMC k20 4x4 (X- brush truck ) 1971 Chevy CST Blazer 4x4 1971 Chevy C/10 1970 Cab Chassis C30 157" 1971 Cab Chassis Custom 30 Deluxe 157" 292/4spd ( Napco Replica ) 1988 Chevy V30 4x4 wrecker challenger 4812

10-31-2011, 12:39 PM	#24
69Beauty Registered User Join Date: Aug 2010 Location: North Dakota Posts: 279	Re: WTB Stock Steel 15x6, 6 lug wheels 4"BS Just got a pair of them i will have to look at backspacing when i get home. now tht i think about it they might be 5.5 and not 6's will that effect your decision? __________________ 1969 C-10 LWB 388 SBC Vortec Heads 10:1 Lunati 60103 cam Weiand intake Quadrajet Carb 12 Bolt 3:73 posi 700r4 Hedman Headers 1998 Dodge Ram 1500 Reg. Cab Long Box 4X4 5.9L 183k miles 1956 Ford F-100 Longbed with Original 272 and 3OTT 1995 C1500 ECSB 6.5 Diesel 4l80e (Camper puller) 1997 Dodge 3/4 ECLB V10 (MPG machine)

Register or Log In To remove these advertisements.