Oil Sending Unit Socket - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Sloan66 · 03-14-2014, 03:12 PM

What size of socket fits the oil sending unit? This is for the non-guage, type.

Wrenchbender Ret · 03-14-2014, 04:14 PM

There are special sockets for these. If its not overly tight you can use pliers.

NoNeck · 03-14-2014, 04:27 PM

Wrenchbender is right. I would go ahead and get the special socket. They are only a few bucks at the parts store. Even though you might get the old sender out with pliers, they could crack the new one when you install it. The ceramic top where the wire plugs on breaks very easy. Ask me how I know.

POP

03-14-2014, 03:12 PM	#1
Sloan66 Registered User Join Date: Jan 2013 Location: Jackson, TN Posts: 215	Oil Sending Unit Socket What size of socket fits the oil sending unit? This is for the non-guage, type.

03-14-2014, 04:14 PM	#2
Wrenchbender Ret Registered User Join Date: Oct 2005 Location: Overland Park, Ks. Posts: 5,228	Re: Oil Sending Unit Socket There are special sockets for these. If its not overly tight you can use pliers.

03-14-2014, 04:27 PM	#3
NoNeck Registered User Join Date: Jan 2011 Location: Chattanooga, TN Posts: 1,108	Re: Oil Sending Unit Socket Wrenchbender is right. I would go ahead and get the special socket. They are only a few bucks at the parts store. Even though you might get the old sender out with pliers, they could crack the new one when you install it. The ceramic top where the wire plugs on breaks very easy. Ask me how I know. POP __________________ 2016 RAM Laramie HEMI 1966 Fairlane GT/A, 390/335 HP If it costs you a dollar to make a friend, KEEP THE DOLLAR. If it costs you a friend to make a dollar, KEEP THE FRIEND.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.