![]() |
|
![]() |
#1 |
283 Drama Queen
![]() Join Date: Dec 2004
Location: Surf City, CA
Posts: 2,435
|
Engine Mount Dial-In
![]() Bought this kit a while back from www.performanceonline.com with everything included. Nice quality. Instruction sheet said 'there may be some drilling and welding required.' Not a big deal, but when I mocked everything up last Saturday I found the motor mount centerlines on the engine are at about 17" and the tower bushing centers are only 15-1/4" from each other. 1-3/4" off. ![]() Three Options: * Notch the frame rails 1" on each side - drill new mounting holes - and maintain engine height. * Piggy-back weld another set of bushings (that intersect into the motor mounts off the towers) on top of the originals - maintaining the original geometry. * Make two machined blocks that go over the original bushing length (and bolt thru them) with three different holes that allow all the adjustment I could ever use. Thoughts?
__________________
For about 12 years of my adult life I had a severe speech impediment. My ex-wife never let me get a word in edgewise. |
![]() |
![]() |
![]() |
#2 |
60-66 Nut
![]() ![]() Join Date: Mar 2007
Location: Coeur d'Alene, Idaho
Posts: 23,247
|
Re: Engine Mount Dial-In
I would say the best way would be to trim the top flange on the frame and drill new holes. Just my .02
__________________
Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE |
![]() |
![]() |
![]() |
#3 |
Registered User
Join Date: Oct 2005
Location: oklahoma
Posts: 663
|
Re: Engine Mount Dial-In
I'm with Captainfab on this one-
just installed the 454 in my 66 and had to take about 1/4" notch out of both top frame rails to get the big block frame towers aligned (outward) properly |
![]() |
![]() |
![]() |
#4 |
283 Drama Queen
![]() Join Date: Dec 2004
Location: Surf City, CA
Posts: 2,435
|
Re: Engine Mount Dial-In
![]() I think you're right guys. Looks like the easiest solution. ![]()
__________________
For about 12 years of my adult life I had a severe speech impediment. My ex-wife never let me get a word in edgewise. |
![]() |
![]() |
![]() |
#5 |
Registered User
Join Date: Dec 2007
Location: Palmer, Alaska
Posts: 13,821
|
Re: Engine Mount Dial-In
looks good....but......where is that brand new 283???
__________________
![]() ![]() |
![]() |
![]() |
![]() |
#6 |
Registered User
![]() Join Date: Sep 2006
Location: San Francisco
Posts: 4,780
|
Re: Engine Mount Dial-In
That is my engine. Just trimmed the rails and the bolt holes lined up. No drilling nesesary.
__________________
"A man and his truck, what a beautiful thing" 65 Short Fleetside BBC 65 Long Fleetside 283 3 on the tree for now. my build thread http://www.67-72chevytrucks.com/vboa...d.php?t=259536 |
![]() |
![]() |
![]() |
#7 | |
283 Drama Queen
![]() Join Date: Dec 2004
Location: Surf City, CA
Posts: 2,435
|
Re: Engine Mount Dial-In
Quote:
Thanks for the perfect example. ![]()
__________________
For about 12 years of my adult life I had a severe speech impediment. My ex-wife never let me get a word in edgewise. |
|
![]() |
![]() |
![]() |
Bookmarks |
|
|