What's wrong with this picture? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**ThreeQuarter** · 08-28-2002, 11:21 PM

OK, so I put an arrow to it to help you out.

It's very painful to look at since it is (was?) the original 327 in an otherwise very original (all except paint) '67 C20. But I'm kinda glad it happened because that's how I was able to find and buy the pickup. I couldn't have afforded it at the time if it was running.

*Gee_Emm* · 08-29-2002, 12:31 AM

I'll tell you whats wrong, EVERY time the little dude pushes the boulder up the hill and something goes wrong and it goes rolling down, well why doesn't he ever get run over by it? He is behind it when he is pushing it up then all the sudden he is on the other side. Mmm something is fishy here, damn I wish I could see what is going on when it slips and starts to roll down!!!!!!!!!!!!!

Yah so anyways about this motor stuff what gives?

Longhorn Man · 08-29-2002, 01:01 AM

Aperently a rod gives.

**ThreeQuarter** · 08-30-2002, 01:46 PM

Hehe that little guy is a hard worker.

Yeah, threw a rod and knocked a chunk out of the skirt. But that's OK I guess because I already have a 327 from a '68 ready for a rebuild.

Didn't someone recently call that a FRV? (Ford Relief Valve) LOL

Ben

XXL · 08-30-2002, 02:33 PM

That's a PCV valve... Positive Crankcase Ventiliation. Ouch!

Kenneth

JD72 · 08-30-2002, 05:59 PM

She can't take anymore captain I'm giving all shes got. Doh

08-28-2002, 11:21 PM	#1
ThreeQuarter Senior Member Join Date: Jun 2000 Location: Texan in Iowa Posts: 2,522	What's wrong with this picture? OK, so I put an arrow to it to help you out. It's very painful to look at since it is (was?) the original 327 in an otherwise very original (all except paint) '67 C20. But I'm kinda glad it happened because that's how I was able to find and buy the pickup. I couldn't have afforded it at the time if it was running. Attached Images __________________ Ben '68 Chevy C10 Custom LWB 327/TH400 2nd owner '16 GMC Sierra 1500 SLE Dblcab 4wd 5.3

08-30-2002, 01:46 PM	#4
ThreeQuarter Senior Member Join Date: Jun 2000 Location: Texan in Iowa Posts: 2,522	Hehe that little guy is a hard worker. Yeah, threw a rod and knocked a chunk out of the skirt. But that's OK I guess because I already have a 327 from a '68 ready for a rebuild. Didn't someone recently call that a FRV? (Ford Relief Valve) LOL Ben __________________ Ben '68 Chevy C10 Custom LWB 327/TH400 2nd owner '16 GMC Sierra 1500 SLE Dblcab 4wd 5.3

08-30-2002, 02:33 PM	#5
XXL Señor Member Join Date: May 2002 Location: Edge of the world Posts: 5,367	That's a PCV valve... Positive Crankcase Ventiliation. Ouch! Kenneth __________________ Craigslist \| ebay \| Engrishtees \| www.myattitudesucks.com \| Follow me on Twitter

08-30-2002, 05:59 PM	#6
JD72 WTF Join Date: Jul 2000 Location: loganville, Ga. Posts: 118	She can't take anymore captain I'm giving all shes got. Doh __________________ Some people are wise, some people are otherwise. 72 cheyenne primer factory air lowered rallyes with flat caps flowmasters 12 bolt 3.73 350/350 combo needs rockers . Cowl hood installed. 81 Malibu wagon lowered with 17's bright ass yellow and v-6. 71 225 Electra all original 455/4 81 z28

08-29-2002, 12:31 AM	#2
Gee_Emm Account Suspended Join Date: Sep 2000 Posts: 4,002	I'll tell you whats wrong, EVERY time the little dude pushes the boulder up the hill and something goes wrong and it goes rolling down, well why doesn't he ever get run over by it? He is behind it when he is pushing it up then all the sudden he is on the other side. Mmm something is fishy here, damn I wish I could see what is going on when it slips and starts to roll down!!!!!!!!!!!!! Yah so anyways about this motor stuff what gives?

08-29-2002, 01:01 AM	#3
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	Aperently a rod gives.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.