![]() |
|
![]() |
#1 |
Registered User
Join Date: Mar 2010
Location: Austin, TX
Posts: 104
|
faux-tina paint jobs
Hey dudes,
What do y'all think of faux-tina paint jobs on our trucks? I know they are generally loved or hated among enthusiasts (I tend to fall on the love it side) My '66 has a crap paint job. The PO painted it about ten years ago, did a crummy job and the clear is starting to flake off. There are plenty of dings and dents that make a nice paint job look terrible, and would cost me way more than i can afford to remove. And hell, I like the character. I like that my truck looks like it was used as a truck. Its not nice enough for a $5k paint job. I could put that money into handling improvements like a good front end. At any rate, I was watching Trucks! on TV and saw their faux paint and thought "I could do that in a weekend with a buddy!" So my question is: Should i faux my truck because its not good enough for a nice paint job or leave it the F alone? ~BC
__________________
'64 Corvair Ragtop '66 C10 Stepside "The oxen may be slow, but the Earth is patient" |
![]() |
![]() |
![]() |
#2 |
Senior Member
![]() Join Date: Oct 2009
Location: Godley, TX
Posts: 17,963
|
Re: faux-tina paint jobs
go faux it.
i'll admit, i prefer real patina because it looks so cool, BUT, your case is a good candidate for a shop truck approach (in my pea brain). And in that case, faux tina is cool. I gotta say though, I am NOT a big fan of how the Trucks guys did their 48 chev (or whatever year it was). Even faux tina should at least look like some tina... Theirs looks like multi coats of paont that were sanded through. Sometimes I look at it and think, kinda cool - other times, bleccchh. And I LOVE the trucks they build and I do LOVE that truck too, just not the paint (or the copper grille they just did - but I need to see how it fades quickly, maybe I'll change my tune). Bottom line - i think faux is ok/cool if done well. I think doing it WELL is probably as hard as a real paint job. But it's cheap to experiment with and you can always just start over. So, in that respect, I'm a big fan of faux. Can't wait to see pics. In fact, what your truck looks like now would probably help us say whether or not to go faux it for real... This is a good idea for a "post your faux" thread... Last edited by jocko; 02-12-2011 at 02:52 PM. |
![]() |
![]() |
![]() |
#3 |
Resistance is Futile
Join Date: Dec 2006
Location: Mesa,Arizona
Posts: 3,520
|
Re: faux-tina paint jobs
I agree with jockos comments; go for it. I would put time into looking at real patina on our trucks to get it right. Faux patina can be overdone and done wrong. I've seen some trucks that look like they would have had to been laying on their side for 40 years to look like the finished product
![]() I would also suggest, if you are going to go for it, just to start with wetsanding the paint you already have just to see whats under it. Start slowly with a 400g(?) and see what happens. Most of these trucks have been painted at least once in their past. Good luck, and have fun.
__________________
64 CHEVY PICK-UP > http://67-72chevytrucks.com/vboard/s...otrash+re-hash 64 CARRYALL >http://67-72chevytrucks.com/vboard/s...=1964+suburban 66 LB >http://67-72chevytrucks.com/vboard/s...d.php?t=427852 STRENGTH/DETERMINATION/MERCILESS/FOREVER .......posted via stationary device |
![]() |
![]() |
![]() |
#4 |
Registered User
Join Date: Mar 2010
Location: Austin, TX
Posts: 104
|
Re: faux-tina paint jobs
This is my truck as of today. The PO did a good job at sanding unevenly. The result is odd rough spots. He also repaired some sheetmetal in the cab like a true amateur. So the pipe dream of show truck is out the window (not that it would have ever happened, haha)
Its also chopped down (it was a long bed). ![]() ![]() ![]() So i was thinking a faux job might look okay, if I took my time and did it right. Do any of Y'all have tips? How would it look to take it down to the sheet metal in places and do a diesel oil finish? I'm just rattling off ideas here. Thanks dudes.
__________________
'64 Corvair Ragtop '66 C10 Stepside "The oxen may be slow, but the Earth is patient" |
![]() |
![]() |
![]() |
#5 | |
Registered User
Join Date: Sep 2010
Location: Tulsa, Oklahoma
Posts: 1,925
|
Re: faux-tina paint jobs
I think you have a great looking truck as it is, why not just color sand the hood only and reclear it, or you could sand it down, fix it, and then reshoot the basecoat and then clear it, you could learn body work and probably end up with a nice looking paint job.
Quote:
|
|
![]() |
![]() |
![]() |
#6 |
Registered User
Join Date: May 2010
Location: Magnolia, Texas
Posts: 245
|
Re: faux-tina paint jobs
Here ya go Chizzler, this is what they came out with. May just be me but I think it looks pretty dang sharp! Definitely gonna go this route!
|
![]() |
![]() |
![]() |
#7 | |
Registered User
Join Date: Aug 2011
Location: Patterson California
Posts: 1,133
|
Re: faux-tina paint jobs
Quote:
__________________
MY 65 C20 BUILD http://67-72chevytrucks.com/vboard/s...d.php?t=483346 ......................_____ .........________//__{\_____ ,,,,,,,/__(O)___//___/__(O)_/ |
|
![]() |
![]() |
![]() |
#8 |
Registered User
Join Date: May 2005
Location: Beaverton, OR
Posts: 3,728
|
Re: faux-tina paint jobs
Check out the Trucks! website, they did a video that is pretty extensive.
http://www.spike.com/full-episode/cl...t-5-faux/36170
__________________
New Project: 1966 LWB C20 Plans: 1/2 ton conversion Dropmember front Dropmember rear Corvette discs Restored raised bed http://67-72chevytrucks.com/vboard/s....php?p=4295210 |
![]() |
![]() |
![]() |
#9 |
Senior Member
![]() Join Date: Oct 2009
Location: Godley, TX
Posts: 17,963
|
Re: faux-tina paint jobs
bob, i think your truck looks pretty darn good! Anyhoo, straight sheetmetal is also important for a faux job, but I see what your getting at - you may be able to camo some of the waves or olde rblemishes and with a faux tina job. I think Pro trash might be on to something though - I think you've got the start of a good patina already, even though you are showing multi blue coats. With some careful sanding, you may not even need to paint!
|
![]() |
![]() |
![]() |
#10 |
Account Suspended
Join Date: Sep 2009
Location: High Plains of Colorado
Posts: 2,485
|
Re: faux-tina paint jobs
I too am planning to try my hand at the faux patina paint.
The best patina'd trucks I have seen are on trucks with light colored paint top coats. This allows the black and/or red-oxide primer to show up better. Here are some examples of patina, some real - some faux, and what I mean about the lighter top coats. Also notice that the real ones almost always have black primer on the dog house, and red oxide on the cab and bed. Last edited by lakeroadster; 02-12-2011 at 07:24 PM. |
![]() |
![]() |
![]() |
#11 |
Registered User
Join Date: Aug 2009
Location: Detroit MI
Posts: 1,209
|
Re: faux-tina paint jobs
Why is it that 25 years ago all my vehicles looked like that and everyone thought they were junk .. I think I invented the rat rod look ... Did I get any recognition .. NO ... now if I had just one of them I could finally be cool....
![]() |
![]() |
![]() |
![]() |
#12 |
Registered User
Join Date: Dec 2010
Location: San Diego, CA
Posts: 77
|
Re: faux-tina paint jobs
I loved the way my truck looked before I got a round to the body work, but the rust wasn't doing her any favors. I figured I needed to fix it before it got too far gone. The best part was the rubbed-thru paint on the window sills from 50 years of hanging arms out the window.
Last edited by tenni126; 02-12-2011 at 08:10 PM. |
![]() |
![]() |
![]() |
#13 |
Registered User
Join Date: Jan 2011
Location: Saco, Maine
Posts: 377
|
Re: faux-tina paint jobs
I hate Patina for a couple reasons,
1. It's the first stage of rust, and I hate rust! 2. Rust is all we have in Maine I need 65 c10 body panels! [because mine rusted out]
__________________
65 Chevy short fleet 350 5 speed, soon to be LSX powered 65 F100 short fleet 91 Heritage softail 94 Fatboy 11 Softail Deluxe [wife's bike] 13 Streetglide http://www.youtube.com/watch?v=yMFMw...eature=mh_lolz |
![]() |
![]() |
![]() |
#14 |
Registered User
Join Date: Mar 2009
Location: Pittsburgh, PA
Posts: 198
|
Re: faux-tina paint jobs
Id say patina that thing. I have had so much fun with my patina trucks. They look cool and there fun to drive. You dont have to worry as much when you park them some where. I always had more fun with my cars before I painted them.
|
![]() |
![]() |
![]() |
#15 |
Registered Loser
Join Date: Jun 2009
Location: Elyria, OH
Posts: 1,523
|
Re: faux-tina paint jobs
That's how mine is. I wonder why that is.
__________________
((..)) ((0)) '63 GMC lwb, 383, th350, lays frame, genuine patina. The Build Thread - http://67-72chevytrucks.com/vboard/s...d.php?t=374267 '88 Astro cargo bagged, shaved, phantom grille. *SOLD* '50 Chevy 2 door sedan awaiting attention. 2014 Silverado Ext cab, 5.3, daily driver. |
![]() |
![]() |
![]() |
#16 |
Account Suspended
Join Date: Sep 2009
Location: High Plains of Colorado
Posts: 2,485
|
Re: faux-tina paint jobs
Hood and front fenders got a different primer on some of our trucks. But some also had black primer all over.
Check out this thread OEM Primer Thread |
![]() |
![]() |
![]() |
#17 |
Registered User
Join Date: Dec 2011
Location: Lee's Summit, MO
Posts: 102
|
Re: faux-tina paint jobs
Quote:
Originally Posted by lakeroadster Also notice that the real ones almost always have black primer on the dog house, and red oxide on the cab and bed. That's how mine is. I wonder why that is. My 61 GMC Sub has original patina and the primer on the hood and fenders is black, red on the body. The hood is a replacement later one without the Buck Rodgers intake scoops and it follows the black primer hood rule. |
![]() |
![]() |
![]() |
#18 |
Registered User
Join Date: Sep 2011
Location: bethany mo
Posts: 19
|
Re: faux-tina paint jobs
haram i like it man'
__________________
Life's journey is not to arrive at the grave safely in a well preserved body, but rather to slide in sideways, totally worn out, shouting "Holy Sh!t, what a ride!" as quoted by collin casey-off the hamb R.I.P. brotha and rip it up in the lil blue duece |
![]() |
![]() |
![]() |
#19 |
Registered User
Join Date: May 2009
Location: Pittsburgh
Posts: 392
|
Re: faux-tina paint jobs
I call it paintina. I did it on mine because the real patina on the truck was turning. I did not want it getting bad so primed it then tanned it and then rubbed it through. I use this truck on a daily basis when there aint salt on the ground so I dont need something shiny to scuff up. It works great for me. To hell with the ney sayers. Do what you like.
__________________
This statement was made possible by a grant from this station and continued support from viewers like you. Flickr |
![]() |
![]() |
![]() |
#20 |
Registered User
Join Date: May 2005
Location: Beaverton, OR
Posts: 3,728
|
Re: faux-tina paint jobs
I was going to paint mine (last thing I do) but I think I will give it a good once over to get all the sheet metal straight, then enhance the patina that is already there.
__________________
New Project: 1966 LWB C20 Plans: 1/2 ton conversion Dropmember front Dropmember rear Corvette discs Restored raised bed http://67-72chevytrucks.com/vboard/s....php?p=4295210 |
![]() |
![]() |
![]() |
#21 |
Registered User
Join Date: Nov 2009
Location: Noblesville, Indiana
Posts: 430
|
Re: faux-tina paint jobs
should I change this color or rub it out more Im putting billets rallies on also
Last edited by SRVBLUES64; 02-13-2011 at 01:41 AM. |
![]() |
![]() |
![]() |
#22 |
SAVING ONE TRUCK AT A TIME
![]() Join Date: Feb 2010
Location: sherwood oregon
Posts: 1,141
|
Re: faux-tina paint jobs
I like it.
__________________
53-suburban (99% done) 40-pick up (99.9% done) 12-cc lb dually D-max (dd) 61-crew cab D-max "PAY LESS FOR WHAT YOU NEED PAY MORE FOR WHAT YOU WANT" 53 BURBAN BARN FIND:http://67-72chevytrucks.com/vboard/s...d.php?t=404091 1940 PROJECT MOON SHINE:http://67-72chevytrucks.com/vboard/s...d.php?t=551088 1961 CREW MAX: http://67-72chevytrucks.com/vboard/s....php?p=6957999 |
![]() |
![]() |
![]() |
#23 |
Guest
Posts: n/a
|
Re: faux-tina paint jobs
|
![]() |
![]() |
#24 |
SAVING ONE TRUCK AT A TIME
![]() Join Date: Feb 2010
Location: sherwood oregon
Posts: 1,141
|
Re: faux-tina paint jobs
Heres with the dodge 20" steelies.
__________________
53-suburban (99% done) 40-pick up (99.9% done) 12-cc lb dually D-max (dd) 61-crew cab D-max "PAY LESS FOR WHAT YOU NEED PAY MORE FOR WHAT YOU WANT" 53 BURBAN BARN FIND:http://67-72chevytrucks.com/vboard/s...d.php?t=404091 1940 PROJECT MOON SHINE:http://67-72chevytrucks.com/vboard/s...d.php?t=551088 1961 CREW MAX: http://67-72chevytrucks.com/vboard/s....php?p=6957999 |
![]() |
![]() |
![]() |
#25 |
Registered User
Join Date: May 2010
Location: Magnolia, Texas
Posts: 245
|
Re: faux-tina paint jobs
Gorgeous truck Chizzler!
|
![]() |
![]() |
![]() |
Bookmarks |
|
|