![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
|
![]() |
#1 |
Registered User
![]() Join Date: Jan 2010
Location: Tulsa OKlahoma
Posts: 114
|
Best way to fill bed seams in 64 SWB
Im thinking about filling the bed seams in my 1964 Chevy shortwide anyone have any experience doing this? Do they have to be welded or can you use a seam sealer? Any Help would be appreciated. Thanks Bill
|
![]() |
![]() |
![]() |
#2 |
60-66 Nut
![]() ![]() Join Date: Mar 2007
Location: Coeur d'Alene, Idaho
Posts: 23,247
|
Re: Best way to fill bed seams in 64 SWB
Welding them would be the best way to fill the seams. However one member here has used JB Weld on similar jobs with good results. You could use another product like maybe panel bonding adhesive, but I don't know if that can be used to fill a large gap like that. You'll want something with excellent adhesion and that sets up solid. Also you will need to have the seam to be filled extremely clean.
__________________
Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE |
![]() |
![]() |
![]() |
#3 | |
Registered User
Join Date: Sep 2009
Location: Bardstown, KY
Posts: 91
|
Re: Best way to fill bed seams in 64 SWB
Quote:
__________________
![]() |
|
![]() |
![]() |
![]() |
#4 |
Senior Enthusiast
Join Date: Feb 2007
Location: Spokane Valley, WA
Posts: 8,356
|
Re: Best way to fill bed seams in 64 SWB
Here's the JB Weld thread.
http://67-72chevytrucks.com/vboard/s...d.php?t=369713 I've never done anything as big as a fleetside bed seam, but have never experienced a failure with JB Weld in any of the repairs attempted. The key to success is absolutely cleanliness and a good rough sandblasted seam/gap. If you choose to try this technique, regular JB Weld is preferred as it has higher tensile strength than JB Kwik. You can save some money by purchasing the large economy version called Industro Weld. It's the same thing as regular or original JB Weld, just in a bigger tube: ![]() I would agree welding something this big and visible would be preferable, however the amount of labor needed to accomplish this without warping would certainly be a significant task (at least with my welding skills). Last edited by markeb01; 08-08-2010 at 10:28 PM. |
![]() |
![]() |
![]() |
#5 |
1 thing at a time is progress.
Join Date: Jun 2007
Location: Ball Ground GA
Posts: 5,511
|
Re: Best way to fill bed seams in 64 SWB
It took me about 2.0 hours to weld one of my bedsides with minimal warpage. The only thing I would worry about in the expansion rate of JB weld compared to metal. In sever heating and cooling it could cause problems. Maybe not just my .02.
![]()
__________________
Alan
Philippians 2:14-16 |
![]() |
![]() |
![]() |
#6 |
Senior Enthusiast
Join Date: Feb 2007
Location: Spokane Valley, WA
Posts: 8,356
|
Re: Best way to fill bed seams in 64 SWB
I would share the expansion concern on such a long seam. The longest seam I ever filled with JB Weld was the front fender gap, which is only about a foot long and almost a continuous curve. I wish I had thought to fill my front hood seam before my repaint last year. I would liked to have known if it would fail with the twisting and flexing of the hood over such a long expanse. Unfortunately now that it's finished I don't have the enthusiasm to experiment.
|
![]() |
![]() |
![]() |
#7 |
Registered User
![]() Join Date: Jan 2010
Location: Tulsa OKlahoma
Posts: 114
|
Re: Best way to fill bed seams in 64 SWB
Thanks guys for the suggestions. It is appreciated. Does anyone have pics of the welding process on a bed side or a hood? Thanks Again Bill
|
![]() |
![]() |
![]() |
#8 |
1 thing at a time is progress.
Join Date: Jun 2007
Location: Ball Ground GA
Posts: 5,511
|
Re: Best way to fill bed seams in 64 SWB
I'm on my phone right now so I can't get you any pics, but somewhere in my 103 pages of my build I have done both the hood and bed. Just search my thread if you get time. The link is in my signature. If I remember I'll get you some pics tonight.
__________________
Alan
Philippians 2:14-16 |
![]() |
![]() |
![]() |
#9 |
Registered User
![]() Join Date: Jan 2010
Location: Tulsa OKlahoma
Posts: 114
|
Re: Best way to fill bed seams in 64 SWB
Thanks Alan, I found the pictures of your bed side, very nice work, is there a lot of warping that occures and do you have any thoughts on the best way to grind out the weld? Any Advice would be Greatly Appreciated, Thanks Bill
|
![]() |
![]() |
![]() |
#10 | |
1 thing at a time is progress.
Join Date: Jun 2007
Location: Ball Ground GA
Posts: 5,511
|
Re: Best way to fill bed seams in 64 SWB
Quote:
![]()
__________________
Alan
Philippians 2:14-16 |
|
![]() |
![]() |
![]() |
#11 |
Registered User
![]() Join Date: Jan 2010
Location: Tulsa OKlahoma
Posts: 114
|
Re: Best way to fill bed seams in 64 SWB
I do have some pics, I will try and upload them later today.
|
![]() |
![]() |
![]() |
#12 |
Registered User
![]() Join Date: Jan 2010
Location: Tulsa OKlahoma
Posts: 114
|
Re: Best way to fill bed seams in 64 SWB
Here are some pics of Inner Patch Panels Before Welding, Didnt get a chance to upload new pics tonight. Bill
|
![]() |
![]() |
![]() |
#13 |
1 thing at a time is progress.
Join Date: Jun 2007
Location: Ball Ground GA
Posts: 5,511
|
Re: Best way to fill bed seams in 64 SWB
Very well done.
![]()
__________________
Alan
Philippians 2:14-16 |
![]() |
![]() |
![]() |
#14 |
Registered User
![]() Join Date: Jan 2010
Location: Tulsa OKlahoma
Posts: 114
|
Re: Best way to fill bed seams in 64 SWB
Alan, can you give some advice on blocking and quide coating slick sand? Thanks Bill
|
![]() |
![]() |
![]() |
#15 | |
1 thing at a time is progress.
Join Date: Jun 2007
Location: Ball Ground GA
Posts: 5,511
|
Re: Best way to fill bed seams in 64 SWB
Quote:
__________________
Alan
Philippians 2:14-16 |
|
![]() |
![]() |
![]() |
#16 |
Registered User
![]() Join Date: Jan 2010
Location: Tulsa OKlahoma
Posts: 114
|
Re: Best way to fill bed seams in 64 SWB
Troy, Thanks for the info, I took a look at your build, looks like your doing a Great Job!!, I've decided to keep my bedsides stock, but I am going to weld the hood seams. Thanks Again Bill
|
![]() |
![]() |
![]() |
Bookmarks |
|
|