![]() |
|
![]() |
#1 |
its all about the +6 inches
Join Date: Jan 2001
Location: Hilliard Ohio
Posts: 2,693
|
Parts delima...
As it has been documented on these pages, the Longhorn is not going yet, and the fundage isn't there to do anything either.
The heater controll in the GMC is just there for looks, no knobs on it at all. There is a toggle switch to tunr the blower on and off, and to select defroster or heater, I have to move the lever on the heater box its self. To adjust the heat selection, I have to reach under the dash and pull the back 1/2 of the heater face plate out (it's broken into 2 pieces) and slide the broken arm over to get the desired heat. The one in the Longhorn is perfect. It has all the arms, a good switch, and a good resister too. I could pull these parts out of the longhorn and into the GMC, but that'll be one more thing to swap over come drive time on the Longhorn. Also, as my dad said, if I do that, it'll be real easy to justify taking something else off of it to put on the GMC, then where would it stop? What do y'all think? Swap, or deal with the PITA heater in the GMC as a reminder that i need to get to work (in NO shop) on the Longhorn? |
![]() |
![]() |
![]() |
#2 |
Registered User
Join Date: Nov 2001
Location: Concord,NC,USA
Posts: 743
|
Parts to the rescue!
Andy,
You have always helped me in the past so I am 99% sure I have a non-A/C heater control "box". Let me dig it out in the next couple of days and you pay the shipping you can have it!!! BBB ![]() |
![]() |
![]() |
![]() |
#3 |
huh?
![]() Join Date: May 2000
Location: Washington, Illinois
Posts: 5,692
|
I'd just deal with it, if I were you. I'm with your dad on this one. Once you start pulling a part here, and a part there, it's hard to stop.
__________________
Someday when I'm lonely, Wishing you weren't so far away, Then I will remember Things we said today. RIP El Jay |
![]() |
![]() |
![]() |
#4 |
its all about the +6 inches
Join Date: Jan 2001
Location: Hilliard Ohio
Posts: 2,693
|
WOW!
Burris, I wasn't even trying to even hint to try and get a new one...but WOW!
Thanks. I was kinda leaning to my dad's opinion too, but it is a real PITA to mess with that sucker. |
![]() |
![]() |
![]() |
#5 |
registered IWATA user
Join Date: Feb 2002
Location: Baton Rouge
Posts: 4,483
|
i'd say deal with it, i'm in taht same situation, my part truck thati ameventully gonna sue the cab has a aesome interoir, an my dialy driver had none, nothing. if itake one part off the parts truck i wont stop, so i'm not. my heater in my driver doesnt ork, never has, and i dont kow how to fix it, but its prob a lot colder up there than here
![]()
__________________
-'63 Ford Fairlane 500 coupe, v8, auto, faded and rusty. awaiting built roller 302 and some flat black -'99 Honda Prelude. vtech/5spd. no pipe, no intake, bone stock. awaiting new top end. -01 GMC Yukon SLT 5.3 dented and scratched with a noisy tranny. Take off that Von Dutch hat before i stab you with a 000 Mack. |
![]() |
![]() |
![]() |
#6 |
Fabricate till you "puke"
Join Date: Jun 2002
Location: Ill
Posts: 9,403
|
No, you dont want to pull pcs from the longhorn.......I have been down that road. 1 pretty hot little 327 that I built for the longhorn ended up in my driver,& set me back some time. it would have been a nice combo backed by that M21 muncie& the 4.10 gears........but never ran it in the longhorn
![]()
__________________
69 longhorn,4" chop,3/5 drop, 1/2 ton suspension/disc brakes,1 1/2" body drop,steel tilt clip, 5.3/Edelbrock rpm intake/600 carb, Hooker streetrod shorties,2 1/2" exhaust/ H pipe/50's Flows , 6 spd Richmond trans,12 bolt/ 3.40 gears.... |
![]() |
![]() |
![]() |
#7 |
State of Confusion!
![]() ![]() Join Date: Jul 2002
Location: Gulfport, MS USA
Posts: 46,923
|
I haven't had to live up in that kind of weather for a while Andy, but I agree with your dad. If you can bear with it now, then do. It'll be easy to startstripping the Longhorn once you start, then it'll be that mnuch more when the spring thaws come around to get it road worthy.
You gave me a ton of help so far, and I figure you'll be spreading it out for a while to come, If I had anything that would help it would be on the way.
__________________
Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God! |
![]() |
![]() |
![]() |
#8 |
its all about the +6 inches
Join Date: Jan 2001
Location: Hilliard Ohio
Posts: 2,693
|
wow...everyone agrees with my dad...this is a nightmare. You guys don't all think we should be driving electric cars too do you? If so, i'll know my dad is paying you and I'll be leaving.
![]() BBB, let me know what/if you find anything and I'll IM you my shipping addy. ![]() |
![]() |
![]() |
![]() |
#9 |
Registered User
Join Date: Oct 2000
Location: From Chicago, Live in Phoenix, AZ
Posts: 6,802
|
Dang, my heater works great, but I never have turn it on :p
|
![]() |
![]() |
![]() |
#10 |
Registered User
Join Date: Nov 2001
Location: Concord,NC,USA
Posts: 743
|
I will look tommorow and let you know. I know I have a couple but I want to make sure the "arms" aren't broke like the one you already have. Do you need the cables too? Let me know.
BBB ![]() |
![]() |
![]() |
![]() |
#11 |
its all about the +6 inches
Join Date: Jan 2001
Location: Hilliard Ohio
Posts: 2,693
|
My cables all work fine, which really makes me wonder what the crack head was doing to break them in the first place.
![]() |
![]() |
![]() |
![]() |
#12 |
Registered User
Join Date: Jul 2002
Location: China Grove, NC
Posts: 147
|
Don't pull any parts off the Longhorn, dad is right this time.
As for the electric cars, they may be easier on the oil supply but, a big block is a lot more fun. |
![]() |
![]() |
![]() |
#13 |
Senior Member
![]() ![]() Join Date: Dec 1999
Location: Urbana,Ohio,USA
Posts: 4,618
|
Or you could drive your sorry butt over to my house. Dig through my 2 or 3 boxes full of heater controls. Use them to build a good one. Then put it in while you are here. And as always, ITS FREE.
__________________
2008 Chevy HHR 1/2 panel. 1949 Chevy Panel truck(just sittin, waiting) Board member #6 |
![]() |
![]() |
![]() |
#14 |
Senior Member
Join Date: Jun 2001
Location: Shelbyville, KY
Posts: 3,269
|
Andy, your Dad is right (they usually are). Don't mess with what works! I have several parts/pieces of non-A/C and A/C heater stuff. Tell me what you need specifically as this stuff is not exactly "rare-collector-items" and the price is like Mike's!! Of course it may require you to get off you dead butt and actually fix something right in the GMC~~~~why is it we tend to avoid doing the "right thing" for our daily drivers while we spend mega bucks for the "thing back in the barn that we hardly ever use"?? Strange huh? Huck
|
![]() |
![]() |
![]() |
#15 | |
December 21, 2012
Join Date: Apr 2000
Location: Black Eagle, Montana
Posts: 1,634
|
Quote:
__________________
"!Ama Sua, Ama Kjella, Ama Lllulla!" |
|
![]() |
![]() |
![]() |
#16 |
its all about the +6 inches
Join Date: Jan 2001
Location: Hilliard Ohio
Posts: 2,693
|
Hey BigBlockBurris, If you haven't found them yet, I'll just swing by fine69's place..possibly this sunday. I need to help him with that new shop he's building anyways. Plus there are a couple things I need to pull off of my old cab that he is storing for me too.
|
![]() |
![]() |
![]() |
#17 |
14.1 @ 96MPH
Join Date: Jul 2001
Location: Mesa, AZ
Posts: 2,811
|
Heater controls? I guess that would come from having a working heater...
![]() My A/C works. Heater, well...
__________________
Project1970 - LS1 Swap Complete! ![]() |
![]() |
![]() |
![]() |
#18 | |
its all about the +6 inches
Join Date: Jan 2001
Location: Hilliard Ohio
Posts: 2,693
|
Quote:
![]() |
|
![]() |
![]() |
![]() |
#19 |
Fabricate till you "puke"
Join Date: Jun 2002
Location: Ill
Posts: 9,403
|
Heater.....air cond......whats that? That stuff got in the way when the longhorn went on a "diet"
![]()
__________________
69 longhorn,4" chop,3/5 drop, 1/2 ton suspension/disc brakes,1 1/2" body drop,steel tilt clip, 5.3/Edelbrock rpm intake/600 carb, Hooker streetrod shorties,2 1/2" exhaust/ H pipe/50's Flows , 6 spd Richmond trans,12 bolt/ 3.40 gears.... |
![]() |
![]() |
![]() |
#20 |
its all about the +6 inches
Join Date: Jan 2001
Location: Hilliard Ohio
Posts: 2,693
|
LOL...but you see Al, some of us install windows and actually drive them every day! Well. not the actualy Longhorn....bummer, my Longhorn gets less use than yours does...
![]() |
![]() |
![]() |
![]() |
#21 |
Fabricate till you "puke"
Join Date: Jun 2002
Location: Ill
Posts: 9,403
|
LMAO!!! Yup I gotta get me @ss in gear & get the door glass in that old truck.......the ac is workin good this time of yr, but cant say much for the heat!
![]()
__________________
69 longhorn,4" chop,3/5 drop, 1/2 ton suspension/disc brakes,1 1/2" body drop,steel tilt clip, 5.3/Edelbrock rpm intake/600 carb, Hooker streetrod shorties,2 1/2" exhaust/ H pipe/50's Flows , 6 spd Richmond trans,12 bolt/ 3.40 gears.... |
![]() |
![]() |
![]() |
#22 |
Registered User
Join Date: Apr 2002
Location: New Carlisle, Ohio,USA
Posts: 1,404
|
I got a non AC heater control, and I live in Springfield. Come get it.Drop me an email and I'll send you directions. It's an extra.
![]() ![]()
__________________
![]() ![]() ![]() LIFE AIN'T EASY WHEN YER FAT AND GREASY! GMC= Got More Class! ![]() ![]() |
![]() |
![]() |
![]() |
#23 |
Fabricate till you "puke"
Join Date: Jun 2002
Location: Ill
Posts: 9,403
|
Longhorn, to be honest i only ran 600-700 miles this yr, & usually average 1000-1500 mi per yr on the old truck. the first 6 yrs I had ZERO miles on that old longhorn, it was completely dismantled & took up a 3 stall garage to house all the parts(go figure,it fit in 1 stall when I backed it in
![]() ![]()
__________________
69 longhorn,4" chop,3/5 drop, 1/2 ton suspension/disc brakes,1 1/2" body drop,steel tilt clip, 5.3/Edelbrock rpm intake/600 carb, Hooker streetrod shorties,2 1/2" exhaust/ H pipe/50's Flows , 6 spd Richmond trans,12 bolt/ 3.40 gears.... |
![]() |
![]() |
![]() |
#24 |
Registered User
Join Date: Jun 2001
Location: Calgary, Alberta, Canada
Posts: 802
|
Crazy: I think I'm going through the same thing with my "other" project. I've driven it a total of 8 hours at MOST since getting it back on the road 2 1/2 years ago.
What about rigging something up with control cables? It may not be stock or even look that great but if it's easy to install and means working your heater isn't going to be a PITA, then it might be worth the effort. I'm thinking even brake cables for a bike might work. Just .02 Greg
__________________
No such thing as a stupid question, right? |
![]() |
![]() |
![]() |
#25 |
More hobbies than money!
Join Date: Jan 2002
Location: Raleigh, nc, usa
Posts: 655
|
Hey bbb,
If longhorn doesn't want it, and if you find it lying around. I need a fan switch for my truck. will come by to pick it up if you are willing.
__________________
'70 cst10/swb 350, 3 on the tree, factory buckets. '70 GMC lwb 350/350 ps,pb '72 c-10 lwb 350/350 a/c, ps, pb '72 Blazer project |
![]() |
![]() |
![]() |
Bookmarks |
|
|