205 shifter bolt upgrade FYI - The 1947 - Present Chevrolet & GMC Truck Message Board Network

sakohntr · 07-25-2007, 05:09 PM

If you want to upgrade to the newer greaseable shifter pivot bolt the part # is 14009313 and they are available from GM for $12.83. They dont come with the grease zert but its tapped and ready to go. If your dealership isnt cooperating PM me and ill ship ya out one for $20.00 delivered. bruce

**special-K** · 07-25-2007, 07:36 PM

That`s great to know.I snapped a couple before.I think I have an n.o.s. one still.I`ll get the greaseable one for sure.

**kwmech** · 07-25-2007, 09:01 PM

I don't think I've ever seen one that wasn't greaseable---but thanks for the p.n.

72armyswbtruck · 07-26-2007, 12:28 AM

So is that the bolt on the NP 205 transfer case that holds the shifter in place?

sakohntr · 07-26-2007, 02:47 PM

Yes, the one and only. On one end is the knob and other end is a short 2 inch twisted rod. Originally these were not greaseable until the I suspect the early 80's.

6T8 · 07-26-2007, 04:19 PM

The 4-speed adapter on '78 np205 has a larger bolt thread and doesn't have zert fitting. At least it is larger than the one on my '70 4-speed. Also the '70 has plastic bushings where the '78 does not. Wondering if it is because the '70 has a 292 engine? So which setup is part # for ? Thanks for info...Rick

LUV2XCLR8 · 07-26-2007, 05:56 PM

**D.PASSMORE** · 07-26-2007, 08:57 PM

Good one Bruce, I have one of these on my 72. Thanks for the part number...

tdkosta · 03-04-2012, 06:54 PM

Quote:

Originally Posted by sakohntr

If you want to upgrade to the newer greaseable shifter pivot bolt the part # is 14009313 and they are available from GM for $12.83. They dont come with the grease zert but its tapped and ready to go. If your dealership isnt cooperating PM me and ill ship ya out one for $20.00 delivered. bruce

Can you still get these bolts?

**Classic Bowties** · 03-05-2012, 01:12 PM

Quote:

Originally Posted by tdkosta

Can you still get these bolts?

If you call your local GM dealer AND get a good counter guy, he can still locate/get you that pivot bolt. Mel

tdkosta · 03-05-2012, 01:14 PM

Quote:

Originally Posted by Classic Bowties

If you call your local GM dealer AND get a good counter guy, he can still locate/get you that pivot bolt. Mel

Thanks,

I wasn't having any luck online.

**Classic Bowties** · 03-05-2012, 10:48 PM

Quote:

Originally Posted by Classic Bowties

If you call your local GM dealer AND get a good counter guy, he can still locate/get you that pivot bolt. Mel

**PICKMUP** · 03-05-2012, 04:21 PM

The last one I found was $75...from a GM dealer (discontinued)

tdkosta · 03-05-2012, 05:17 PM

Quote:

Originally Posted by PICKMUP

The last one I found was $75...from a GM dealer (discontinued)

$75 - OUCH. If it is discontinued I guess I better pick one up if I can find one. Looks like they have them here for $30.71

http://parts.nalleygmc.com/products/.../14009313.html

webfoot · 03-05-2012, 05:31 PM

Quote:

Originally Posted by tdkosta

$75 - OUCH. If it is discontinued I guess I better pick one up if I can find one. Looks like they have them here for $30.71

http://parts.nalleygmc.com/products/.../14009313.html

Still $43 for a bolt after shipping - ouch still!

Seems like something a guy with a drill press and a tap could make fairly easily.

webfoot · 03-05-2012, 04:43 PM

Will this stop the transfer case lever from constantly vibrating while driving?

**D.PASSMORE** · 03-05-2012, 05:24 PM

Quote:

Originally Posted by webfoot

Will this stop the transfer case lever from constantly vibrating while driving?

It did on mine.

**Dieselwrencher** · 03-05-2012, 05:58 PM

I just ordered one from a local GM dealer for $28.41. They have to order it in, but it beats not having one at all. Thanks for bumping this old thread!

tdkosta · 03-06-2012, 12:19 PM

Looks like I'll be calling the parts counter. Just got an email that my order couldn't be filled because the part had been discontinued.

**Classic Bowties** · 03-18-2012, 06:02 PM

Quote:

Originally Posted by tdkosta

Looks like I'll be calling the parts counter. Just got an email that my order couldn't be filled because the part had been discontinued.

tdkosta, did you ever come up with the needed t/c shifter bolt? I recently needed to dig a few of these up for a couple of other guys and have some extra setups available and ready to ship. The now discoed pivot bolt, the bushing/washer and the grease fitting were all sold separately by GM, I can sell you all three for $50. plus $6.00 for USPS priority shipping w/del. conf. anywhere lwr 48. Lmk, Mel.

tdkosta · 03-18-2012, 06:24 PM

Thanks I found one online, but I am sure others will want/need one.

Quote:

Originally Posted by Classic Bowties

tdkosta, did you ever come up with the needed t/c shifter bolt? I recently needed to dig a few of these up for a couple of other guys and have FOUR extra setups available and ready to ship. The now discoed pivot bolt, the bushing/washer and the grease fitting were all sold separately by GM, I can sell you all three for $45. plus $6.10 for USPS priority shipping. Lmk, Mel.

**72ironmike** · 03-19-2012, 01:55 PM

Mel, As I prefer not to pay $84.00 for just the bolt from GM'S Discount Parts Warehouse, I would gladly send you $51.10 for all three parts. Please PM paypal info. Thanks. Mike.

**Classic Bowties** · 03-19-2012, 02:56 PM

Quote:

Originally Posted by 72ironmike

Mel, As I prefer not to pay $84.00 for just the bolt from GM'S Discount Parts Warehouse, I would gladly send you $51.10 for all three parts. Please PM paypal info. Thanks. Mike.

Hey Mike, shoot me a pm with your email address and I will return the detailed invoice through paypal, this is how I like to keep track/order on any & everything shipped. Thanks, Mel.

**gmc 2500 4x4** · 03-27-2012, 07:49 AM

Quote:

Originally Posted by Classic Bowties

tdkosta, did you ever come up with the needed t/c shifter bolt? I recently needed to dig a few of these up for a couple of other guys and have four extra setups available and ready to ship. The now discoed pivot bolt, the bushing/washer and the grease fitting were all sold separately by GM, I can sell you all three for $45. plus $6.10 for USPS priority shipping. Lmk, Mel.

i'll take a set if ya have one left...paul

**Classic Bowties** · 03-27-2012, 03:33 PM

Quote:

Originally Posted by gmc 2500 4x4

i'll take a set if ya have one left...paul

Yes, I can take care of you on your request. Pm me an e-mail address and I will return the detailed invoice through paypal, please also include/confirm your ship to address unless you are 100% sure that the one paypal sends along w/payment confirmation is correct. Thanks, Mel.

07-25-2007, 05:09 PM	#1
sakohntr Registered User Join Date: Mar 2002 Location: Floodwood Minnesota Posts: 1,057	205 shifter bolt upgrade FYI If you want to upgrade to the newer greaseable shifter pivot bolt the part # is 14009313 and they are available from GM for $12.83. They dont come with the grease zert but its tapped and ready to go. If your dealership isnt cooperating PM me and ill ship ya out one for $20.00 delivered. bruce Attached Images __________________ 1967 K30 Napco 292/SM420 original paint 30k miles 1968 K60 Napco 396/5spd. dbl frame 52" michelins 1969 K10 SWB GMC 454/4spd 6" 35's posi,hooks 1972 C30 longhorn,BB/AT,A/C,Tilt,Toolbox,lokr 1987 K20 Chevrolet Suburban. 6" lift. 5.7L/TH400 1979 K60 GMC Coleman 4x4, 427/Allison.

07-25-2007, 07:36 PM	#2
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,861	Re: 205 shifter bolt upgrade FYI That`s great to know.I snapped a couple before.I think I have an n.o.s. one still.I`ll get the greaseable one for sure. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

07-25-2007, 09:01 PM	#3
kwmech Senior Member Join Date: Mar 2003 Location: Colfax-California Posts: 8,487	Re: 205 shifter bolt upgrade FYI I don't think I've ever seen one that wasn't greaseable---but thanks for the p.n.

07-26-2007, 12:28 AM	#4
72armyswbtruck Registered User Join Date: Feb 2004 Location: Idaho Posts: 4,034	Re: 205 shifter bolt upgrade FYI So is that the bolt on the NP 205 transfer case that holds the shifter in place? __________________ "Remember, They can Kill You, but they can't eat You, That's against the law!!!!!!!!!" Last edited by 72armyswbtruck; 07-26-2007 at 12:29 AM.

07-26-2007, 02:47 PM	#5
sakohntr Registered User Join Date: Mar 2002 Location: Floodwood Minnesota Posts: 1,057	Re: 205 shifter bolt upgrade FYI Yes, the one and only. On one end is the knob and other end is a short 2 inch twisted rod. Originally these were not greaseable until the I suspect the early 80's. __________________ 1967 K30 Napco 292/SM420 original paint 30k miles 1968 K60 Napco 396/5spd. dbl frame 52" michelins 1969 K10 SWB GMC 454/4spd 6" 35's posi,hooks 1972 C30 longhorn,BB/AT,A/C,Tilt,Toolbox,lokr 1987 K20 Chevrolet Suburban. 6" lift. 5.7L/TH400 1979 K60 GMC Coleman 4x4, 427/Allison.

07-26-2007, 04:19 PM	#6
6T8 Active Member Join Date: Dec 2004 Location: Tucson, AZ Posts: 233	Re: 205 shifter bolt upgrade FYI The 4-speed adapter on '78 np205 has a larger bolt thread and doesn't have zert fitting. At least it is larger than the one on my '70 4-speed. Also the '70 has plastic bushings where the '78 does not. Wondering if it is because the '70 has a 292 engine? So which setup is part # for ? Thanks for info...Rick

07-26-2007, 05:56 PM	#7
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,475	Re: 205 shifter bolt upgrade FYI __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Big Piggy: "Goliath" 07 Kodiak C4500 Lil Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

07-26-2007, 08:57 PM	#8
D.PASSMORE One of the First Join Date: Jan 2000 Location: St. Augustine,FL. Posts: 4,055	Re: 205 shifter bolt upgrade FYI Good one Bruce, I have one of these on my 72. Thanks for the part number... __________________ DAVID PASSMORE ST AUGUSTINE ,FL ZIP 32084 '71 SWB K/10 CUSTOM DELUXE (Chili) '72 BLAZER K/5 Muscle Truck (Mule) '72 LWB K/20 CHEYENNE (Blackie)

03-05-2012, 04:21 PM	#13
PICKMUP "Trucks with Class" Join Date: Jul 2000 Location: OLYMPIA, WA, USA Posts: 8,125	Re: 205 shifter bolt upgrade FYI The last one I found was $75...from a GM dealer (discontinued) __________________ Email: frankeham@comcast.net Phone: 360-956-7170

03-05-2012, 04:43 PM	#16
webfoot Registered User Join Date: Nov 2007 Location: Hermiston, OR Posts: 947	Re: 205 shifter bolt upgrade FYI Will this stop the transfer case lever from constantly vibrating while driving? __________________ *Running in place gets you nowhere fast.* -me 1968 GTO 4-spd covnvertible 1970 K-20 4-speed, factory AC.

03-05-2012, 05:58 PM	#18
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,140	Re: 205 shifter bolt upgrade FYI I just ordered one from a local GM dealer for $28.41. They have to order it in, but it beats not having one at all. Thanks for bumping this old thread! __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

03-06-2012, 12:19 PM	#19
tdkosta Registered User Join Date: Jan 2007 Location: Mesa, AZ Posts: 781	Re: 205 shifter bolt upgrade FYI Looks like I'll be calling the parts counter. Just got an email that my order couldn't be filled because the part had been discontinued.

03-19-2012, 01:55 PM	#22
72ironmike Senior Member Join Date: Jan 2004 Location: Olathe KS (Greater Kansas City MO Area) Posts: 2,051	Re: 205 shifter bolt upgrade FYI Mel, As I prefer not to pay $84.00 for just the bolt from GM'S Discount Parts Warehouse, I would gladly send you $51.10 for all three parts. Please PM paypal info. Thanks. Mike.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.