![]() |
|
![]() |
#1 |
Registered User
Join Date: Jun 2012
Location: Cambridge Ontario Canada
Posts: 11
|
Old Blue build thread
My 72 GMC C15 lwb
|
![]() |
![]() |
![]() |
#2 |
Registered User
Join Date: Jun 2012
Location: Cambridge Ontario Canada
Posts: 11
|
Re: Old Blue build thread
250 was ejected and a 350 crate installed. Air ride started to be fitted in.
|
![]() |
![]() |
![]() |
#3 |
Registered User
Join Date: Jun 2012
Location: Cambridge Ontario Canada
Posts: 11
|
Re: Old Blue build thread
Air bags bolted in with plates and cups. Sits better but still not near low enough. Tossed in my hand grenade shifter for bad azz points.
|
![]() |
![]() |
![]() |
#4 |
Registered User
Join Date: Jun 2012
Location: Cambridge Ontario Canada
Posts: 11
|
Re: Old Blue build thread
Soon the cutting begins. Cupping lower control arms and step notch.
|
![]() |
![]() |
![]() |
#5 |
Registered User
Join Date: Jun 2012
Location: Cambridge Ontario Canada
Posts: 11
|
Re: Old Blue build thread
So... I currently finished cupping my lower control arms. I was intimidated to attempt this at first but I figured the pros out weigh the cons so out came the saws and welder. I used 8 inch pipe and 1/4 inch flat plate to fab up the cups 2.5 inches into the control arm.
Last edited by Tailgate20; 12-01-2015 at 09:43 AM. |
![]() |
![]() |
![]() |
#6 |
Registered User
Join Date: Jun 2012
Location: Cambridge Ontario Canada
Posts: 11
|
Re: Old Blue build thread
For some strange reason I seem to be missing a security token to post more pictures. I'm not sure how to remedy this so when I find out, I'll get them up asap.
|
![]() |
![]() |
![]() |
Bookmarks |
|
|