|
|
|
12-10-2015, 07:04 AM
|
#1 |
|
Registered User
Join Date: Aug 2015
Location: Lake Placid, FL.
Posts: 67
|
Coil Springs
Hey Guys...I just installed new coils on my 67 long fleet and seem to have a problem....They are the variable rate style but the front part off the top coils are touching when I put the truck down off jacks....No load or anything in bed...It seems like where they sit on the frame on top should be 90 degrees with the spring lower mounting hole...Am I missing some sort of tapered spacer to make the spring point straight down towards the trailing arm hole?? I can get replacement coils but I'm thinking they will be the same....Thanks,,,Dave
|
|
|
|
12-10-2015, 08:09 AM
|
#2 |
|
Registered User
Join Date: Jun 2015
Location: Melbourne, Australia
Posts: 231
|
Re: Coil Springs
Pictures? My rear coils are the stock variable rate and the coils in the middle of the spring almost touch.
__________________
John 69 c20, 396, th400, dana60, ps, ac |
|
|
|
|
12-10-2015, 01:47 PM
|
#3 |
|
Registered User
Join Date: Mar 2015
Location: Utah
Posts: 750
|
Re: Coil Springs
hard to say without pictures
|
|
|
|
|
12-10-2015, 02:05 PM
|
#4 |
|
Registered User
Join Date: Aug 2015
Location: Lake Placid, FL.
Posts: 67
|
Re: Coil Springs
I can't do pics cause wifey is out of town with her phone/camera...
But as long as its pretty much normal I'll leave it alone.....May be able to post pics tomorrow.....Dave |
|
|
|
 |
| Bookmarks |
|
|
Hybrid Mode
